Abrasion Resistant Plate

check out our price list, We are a well-known Ar Steel Plate Supplier in India and we have a global network

Abrasion Resistant Steel Grades Stockist, are available in any size you need, as long as all norms and criteria are followed.

Abrasion resistant components are higher carbon steel modules. An Abrasion Resistant Plate is designed with main alloys of carbon and iron with low mineral grades that are utilized in stabilizing the plates. These plates have a thickness above 6mm and can extend up to 100mm. Produced possessing superior hardness and toughness, the Ar Steel Plate protects the components against tear and wear-resisting modules. These plates are resistant to abrasion, impact wear, sliding, etc. The Abrasion Resistant Steel Plates provide good stability to different applications and are usually tempered and quenched using ingots or steel blocks.

The grain structure of these plates is improved to ensure they possess enhanced toughness and hardness that invariably helps increase their overall hardness. The versatile Abrasion Resistance Plate doesn’t have strengths similar to stainless steel grades, but they have enhanced tolerance to wear and tear. They also offer a cost-effective option for expensive SS grades. They are a common feature in conveyors, body armor, ballistic plates, buckets, construction equipment, etc.

The Abrasion Resistant Steel Grades are divided into different classes based on their hardness and chemical composition. The most common grades include the AR400, AR450, AR500, and AR600. The prices of these steel grades are constantly fluctuating based on different features. The prices of these plates in India start at $180 and can go up to $300 per piece. These AR Plates are mostly seen in projects where hardness and brittleness are balanced.

This allows the plates to be easily formed, shaped, and welded in correct dimensions. In certain instances, the entire grain structure of the plate is changed via the hardening procedure. All these components are quality assured and can be designed as per your requirements. To know more about these components, or to get a quote on them, visit any of our outlets or contact us for more information.

• Abrasions can be classified into three types: linear or scratch abrasions, grazed or brush abrasions, and patterned abrasions.
• AR is formable and weather-resistant because to the metals used, as well as harder due to the carbon.
• Abrasion-resistant steel plates are a typical steel plate with a tougher, harder quality that lasts nearly four times longer than conventional high-strength structural steel plates.

Abrasion Resistant Plate

Ar Steel Plate

Abrasion Resistant Steel Plates

Ar Steel Sheet

Abrasion Resistant Wear Plate

Abrasion Resistant Sheet Metal

Check Plate Vs Sheet and its Toughness, As a stocking distributor we offer a wide range of Abrasion Resistance Plate in a variety of sizes and grades at dealer prices in India.

 

Take the reference of our quality and timely delivery from our clients in following Country

Ar500 Nm500 Abrasion Resistant Steel Plate Anti Wear Plates
Deutsche METROHM GmbH & Co, Europe

Fora 500 Wear and Abrasion Resistant Steel Plates
Siam Chemical Industry Co. Ltd, Thailand

Abrasion Resistant 4cr3mo3VSI Die Steel Plates with Cold Rolled
Cisco Trading Company, Kuwait

Ar500 16mm Wear or Abrasion Resistant Steel Plates
Eastern Petrochemical Company Ltd, Saudi Arabia (KSA)

 

What are Ar450 Steel Plate Properties?

Grade	Thickness in mm	Type	Hardness Range (HBW)
450 AR	6 - 60	Heavy Plates	420 - 500
450 AR	3.0 - 6.4	Cut Lengths	420 - 500

 

Weldability Chart of Abrasion Resistant Wear Plate

 

Abrasion Resistance Plate Equivalent Standards

Steel Grade	ThyssenkKrupp	Ruukki	JFE	SSAB	DILLIDUR
NM450	XAR450	Raex450	-	HARDOX450	450V
NM400	XAR400	Raex400	EH400	HARDOX400	400V
NM360	-	-	EH360	-	-
NM500	XAR500	Raex500	EH500	HARDOX500	500V

 

AR Plate Chinese Standard

NM500 NM400 NM360 NM450 NR400 NR360

KN-60 KN-63 B-HARD360 KN-55 B-HARD400 B-HARD450

 

AR600 Plate Bending Formability Chart

 

What are Ar500 Steel Plate Properties?

Grade	Thickness (mm)	Product	Hardness Range (HBW)
500 AR	5 – 60	Heavy Plates	450 – 540
500 AR	4.0 – 5.5	Cut Lengths	450 – 540

Abrasion Resistant Steel Plate For Sale

Abrasion Resistant Steel Sheet

Ar Cold Rolled Plates

Abrasion Resistant Perforated Sheet

AR Steel Sheet Metal

Abrasion Resistance Plates

AR600 Wear Resistant Steel Coated Hot Rolled Steel Sheet

Ar500 Ballistic Abrasion Wear Resistant Steel Plates

Abrasion Resistant Compound Steel Plates

 

Selection Technique of Abrasion Resistant Plates

	IMPACT	355 L	400HB	450HB	500HB
Abrasion Resistant	+	+	+	++	+++
Cold formability	+	--	+	0	-
Weldability	++	-	+	0	-
Use at high temperature	0	+	-	-	-
Hot formability	0	+	-	-	-
Machining	+	+	+	0	-
Toughness	++	-	+	0	-
Nitriding	+	+	-	-	-

 

What are Ar300 Steel Plate Properties?

Chemical Analysis of AR300 Plates

Silicon	Boron	Carbon	Manganese	Sulfur	Phosphorus	Chromium	Molybdenum	Nickel
0.7max	0.005max	0.18max	1.70max	0.015max	0.025max	1.50max	0.5max	0.40max

 

Mechanical Strength of AR300 Wear Plates

Grade	Tensile Stress MPa	Strength Impact Charpy V 20 J	Yield Strength MPa	Elongation A
300 AR	1000	-40°C	900	11

 

Hs Code For Abrasion Resistant Steel Plates

Description	HS Code
Size 450 HBW(HARDNESS) 2 x 6 MTR 50 MM Abrasion Resistant Plates	72254019
Size : 10 Wear Plates For Cement Industry Suitable For Severe Wear Resistant And Abrasion.	83119000
WEAR PLATE Diffusion make Borodur wear resistant plates suitable for severe abrasion and mild impact Size : 1.3 mtr x 3 m	83119000
500 Hbw Size 10 Mm X 2000 Mm X 6000 Mm Abrasion Resistant Plates	72254019

 

AR500 Plate Standards

• B-HARD400, B-HARD360, B-HARD450
• NR400, NR360
• NM400, NM360, NM450, NM500
• AR400, AR500, AR450, AR600
• KN-60, KN-55, KN-63

 

Abrasion Resistant Steel Brand Names & It's Manufacturer

Its Manufacture	Brand Name	Country
SSAB	Hardox	Swedan
Sumitomo Metal	Sumihard	Japan
JFE Steel	Everhard	Japan
Rukki	Raex	Finland
Indu Steel	FORA	Belgium
NSC Steel	Welhard	Japan
Corus	Abrazo	Europe
Thyssenkrup Metal	XAR	Germany
Satzgitter	Brinar	Germany
Acroni	Nicrodur	Europe
Huta	Hartplast	European
Dillinger	Dillidur	Germany
Duferco	Quard	Belgium

 

Technical Dimensions of AR450 Plate

Width	Thickness	Length
2000 mm	5 mm	6000 mm
2000 mm	4 mm	6000 mm
2500 mm	6 mm	6000 mm
2000 mm	6 mm	6000 mm
2500 mm	8 mm	6000 mm
2000 mm	10 mm	6000 mm
2000 mm	8 mm	6000 mm
2000 mm	15 mm	6000 mm
2000 mm	12 mm	6000 mm
2000 mm	20 mm	6000 mm
2000 mm	16 mm	6000 mm
2000 mm	32 mm	6000 mm
2000 mm	25 mm	6000 mm
2000 mm	50 mm	6000 mm
2000 mm	40 mm	6000 mm
1800 mm	60 mm	3400 mm

 

NM450 Plate Industrial Use

• Material crushing, handling and conveying
• demolition, Construction and recycling
• Earthmoving equipment and attachments
• Cement and other industrial plants
• Mining and quarrying
• trailers, Trucks and other vehicles
• Agricultural machinery

 

 

 

Ar Steel Sheet Brinell Hardness Chart

• AR500: 460-544 BHN Typically
• AR450: 430-480 BHN Typically
• AR400: 360-440 BHN Typically
• AR600: 570-625 BHN Typically (less common, but available)

we maintain plenty in stock to meet the buyer's immediate demands, We are an importer and exporter of Abrasion Resistant Wear Plates

 

NM Abrasion Resistant Steel Composition

Steel Grade	Si	C	Ceq	P	Mn	Cr	S	B	Mo	N	H
NM550	≤0.40	≤0.35	≤0.72	≤0.010	≤1.20	≤1.00	≤0.002	≤0.002	≤0.30	≤0.0045	≤0.0002
NM450	≤0.60	≤0.22	≤0.62	≤0.012	≤1.50	≤0.80	≤0.005	≤0.002	≤0.30	≤0.005	≤0.00025
NM360/NM400	≤0.40	≤0.20	≤0.53	≤0.012	≤1.50	≤0.35	≤0.005	≤0.002	≤0.30	≤0.005	≤0.00025
NM500	≤0.60	≤0.30	≤0.65	≤0.012	≤1.00	≤1.00	≤0.002	≤0.002	≤0.30	≤0.005	≤0.0002

 

Yield Strength of NM Series Ar Steel Plate

Steel Grade	Tensile Strength /MPa	Yield Strength /MPa	Hardess (Brinell) HBW10/3000	Elongation A50 /%	Impact/J （-20℃）
NM400	≥1200	≥950	380-430	≥12	≥21
NM360	≥1050	≥900	320-390	≥12	≥21
NM500	≥1350	≥1100	≥470	≥6	≥17
NM450	≥1250	≥1050	420-480	≥7	≥21
NM550	-	-	≥530	-	-

 

AR500 Plate USA Standard

• AR400
• AR500
• AR450
• AR600

 

Abrasion Resistant Sheet Metal Sizes in Stock

Grade	Width	Thickness	Length
AR400F Plates	48" – 120"	3/16" – 4"	96" – 480"
AR200 / AR 235 Plates	48" – 120"	3/16" – 3/4"	96" – 480"
AR500 Plates	48" – 96 "	3/16" – 2 "	96" – 480"
AR450F Plates	48" – 96 "	3/16" – 2 "	96" – 480"
AR600 Plates	48" – 96 "	3/16" – 3/4"	96" – 480"

What are Ar Steel Plate Properties?

Abrasion Resistant Grade	Si	C	Mn	B	S	P	Ni	Cr	Mo
AR300 Plate	0.7	0.18	1.70	0.005	0.015	0.025	0.40	1.50	0.50
AR450 Plate	0.7	0.26	1.70	0.005	0.015	0.025	0.70	1.00	0.50
AR500 Plate	0.7	0.30	1.70	0.005	0.015	0.025	0.70	1.00	0.50
AR400 Plate	0.7	0.25	1.70	0.005	0.015	0.025	0.70	1.50	0.50

 

with dimensions ranging from 6000 x 2000mm to 12000 x 3000mm Larger area AR Plates stockist On request

 

Chemical Composition of Ar Steel Sheet

Grade	Si	C	Mn	B	S	P	Ni	Cr	Mo
AR300 Plates	0.7	0.18	1.70	0.005	0.015	0.025	0.40	1.50	0.50
AR450 Plates	0.7	0.26	1.70	0.005	0.015	0.025	0.70	1.00	0.50
AR500 Plates	0.7	0.30	1.70	0.005	0.015	0.025	0.70	1.00	0.50
AR400 Plates	0.7	0.25	1.70	0.005	0.015	0.025	0.70	1.50	0.50

 

AR Plate Mechanical Properties

Grade	Hardness Range	Tensile Strength MPa	Yield Strength MPa	Elongation A	Impact Strength Charpy V 20J
AR450 Plates	420-500	1450	1200	8	-40C
AR300 Plates	-	1000	900	11	-40C
AR500 Plates	450-540	1450	1250	8	-30C
AR400 Plates	360-480	1250	1000	10	-40C

SSAB Hardox Plates

Thyssenkrupp XAR Plates

Rukki Raex Plates

Duferco Quard Plates

Sumitomo Metal Sumihard Plates

NSC Steel Welhard Plates

JFE Steel Everhard Plates

Acroni Nicrodur Plates

Satzgitter Brinar Plates

Dillinger Dillidur Plates

Huta Hartplast Plates

CorusAbrazo Plates