Table Of Content
- ABREX 500 Wear Plate Technical conditions
- Plate Abrex 500 Maximum Carbon equivalent CET (CEV)
- ABREX 500 Plates Flame Cutting
- Available Sizes of Abrex 500 Steel Plate
- ABREX 500 Wear Resistance Plate Thickness
- 515 BHN Plate Chemical Composition
- Abrex 500 Steel Plate Mechanical Properties
- Most common Applications of Plate Abrex 500
- ABREX 500 Wear Resistance Plates
Makes
Excellent quality Steel Plate Abrex 500 Supplier in India on time and in good condition with brinell hardness 515 BHN
Abrex 500 Steel is a hardened abrasion-resistant grade. The superior composition of the Abrex 500 Plate allows these modules to possess good resistance to wear and tear across stress-induced environments. The Abrex 500 Steel Plate also shows good resistance against corrosive media while providing outstanding hardness in the system. This lightweight Plate Abrex 500 is designed with thicknesses between 5mmm up to 100mm, exhibiting good workability and welding capacity.
NSSMC, Japan Make Abrex 500 Sheet & Plate Dealer and Distributor, supplied Abrex 500 Steel Plate the global buyers at competitive rates. view Abrex 500 Vs Ar 500
Why Triton Alloys for your Abrex 500 Steel Plate Requirements
Abrex 500 Material Tolerances confirm to EN 10 029. We deliver this material in Quenched condition. Triton Alloys is an Indian Government recognised three star export house and an approved supplier of Ar 500 material in many Government and public sector companies like Indian oil, ONGC, BHEL, BHEL, L&T and many more. We stock all sizes and thickness of Ar 500 or Abrex 500 material. As per mill we stock their production range and also provide cut to size so we have one of the largest inventory of this grade in different thickness as well as of many renowned manufacturers. So if you can find your required size in our stockyard then you can save a lot of cost.
Abrex 500 and Ar 500 Plate are abrasion-resistant hardened grades. The major difference between both these grades plate is that Abrex 500 is a steel grade while Ar 500 is a company in Sweden that manufactures products similar to the Abrex range
- Item: Abrasion Resistant Plate
- Surface : Quenched, Tempering,Normalized.
- Length : Up to 12000 mm
- Thickness : 5mm ~ 120 mm
- Width : Up to 3000 mm
- Heat Treatment: Q+T, N
- Material : ABREX 500 Abrasion Resistant Steel Plates, AR 500 Steel Plate, ABREX 500, ABREX 500 Wear Resistant Plates
- Applications : metallurgy, concrete industry, coal industry, fan industry, construction machinery, mining machinery etc.
- Production : Cold-Rolled (CR) /Hot-Rolled (HR)
| Description | Price |
| Abrex 500 Wear and Abrasion Resistant Steel Sheet | US $ 499-599 / Ton |
| Abrex 500 Abrasion Resistant Steel Plate | US $ 1200-1500 / Ton |
| Abrasion Resistant Abrex 500 Building Material Steel Plate | US $ 780-800 / Ton |
| Abrex 500 Wear and Abrasion Resistant Steel Plate | US $ 499-599 / Ton |
Abrex 500 Steel Plate
Plate Abrex 500
515 BHN Plates
Abrex 500 Plate
ABREX 500 Wear Resistance Plates
Abrex 500 Sheet
Always a reliable and trustworthy Stockist of ABREX 500 Wear Resistance Plate , we provide all essential documents to the buyers, check Chemical Composition
What is Abrex 500 Chemical Composition
Abrex 500 Steel Plate grade is designed possessing a superior chemical composition. The grade is composed of alloys:
- Carbon- 0.35%
- Silicon- 0.70%
- Manganese- 2%
- Phosphorous- 0.015%
- Sulfur- 0.010%
- Nickel- 2%
- Chromium- 1.20%
- Molybdenum- 0.60%
- Boron- 0.005%
|
|
| Abrex 500 Steel Plate Standard thicknesses (overlay) | Standard Dimensions of Wear 500 material | ||||
| Single | Multiple | ||||
| Metric Size | Imperial Size | Metric Size | Imperial Size | Metric Size | Imperial Size |
| 3 mm on 6 mm | 1/8 Inch on 1/4 Inch | 6 mm on 6 mm | 1/4 Inch on 1/4 Inch | 1.2 mm x 2.4 mm 1.5 mm x 3.0 mm 1.8 mm x 3.0 mm 2.4 mm x 3.0 mm |
4 Inch x 8 Inch 5 Inch x 10 Inch 6 Inch x 10 Inch 8 Inch x 10 Inch |
| 5 mm on 8 mm | 3/16 Inch on 5/16 Inch | 6 mm on 10 mm | 1/4 Inch on 3/8 Inch | ||
| 10 mm on 10 mm | 3/8 Inch on 3/8 Inch | ||||
| 12 mm on 12 mm | 1/2 Inch on 1/2 Inch | ||||
| 20 mm on 10 mm | 3/4 Inch on 3/8 Inch | ||||
| Steel Grade | Feed (mm/tooth) | Cutting Speed (mm/min) |
| Abrazo 400* | 0.10-0.15 | 100 |
one of the prominent Exporter of Abrex 500 Abrasion Resistant Steel Plate in india, get Mechanical Properties, Equivalent and Advantages and Disadvantages here
| Bending direction (bend axis) | Minimum die opening |
Minimum inside Bending radius |
| Parallel to rolling direction | 10t | 4t |
| Perpendicular to rolling direction | 8.5t | 3t |
- Ultrasonic testing in accordance with SA 578 or as required
- At -20 / - 46 degrees Celsius, Charpy Impact was tested.
- MTC in accordance with EN 10204 / 3.2
- Furnace Normalised
- IBR Form IV on BQ Plates
| Thickness mm | 5 - (10) | -5 | 20 - (40) | 10 - (20) | 40 - 103 |
| CET (CEV) Max | 0.036 (0.052) | 0.034 (0.049) | 0.045 (0.066) | 0.043 (0.064) | 0.047 (0.075) |
Abrex 500 Equivalent
Abrex 500 Steel Plate is a high-strength grade whose equivalent grades can be Quard, Sumihard, Ar, the Indian grade Rockstar and S69QL material, etc.
Abrex 500 Steel Plate Advantages and Disadvantages
Abrex 500 Steel Plate is an excellent abrasion resistance grade of steel. The Abrex 500 Abrasion Resistant Steel Plate show excellent resistance against wear and tear. They also prevent weathering from inducing itself on the robust Abrex 500 Sheets & Plate. These components possess excellent hardness due to the excellent carbon concentration embedded in them. The ABREX 500 Wear Abrasion Resistant Steel Plate help in lowering the weight on structural steel grades.
These plate exhibit outstanding impact-resistant with superior workability. ABREX 500 Wear Resistance Plate also possess superb mechanical properties coupled with good welding capacities with 3 times more abrasion resistance over standard steels. The high hardness in the ABREX 500 Plate makes them brittle while reducing their ductility by a huge margin. These plate also possess low strength due to the overloading of carbon. The Abrex 500 (NSSMC, Japan Make) grade is susceptible to failure at extremely low temperatures.
| Plate Thickness (mm) |
Cutting O2 (Lb.in2) |
Nozzle Size (LPN mm) |
Heating O2 (Lb.in2) |
Cutting speed (mm/min) |
Heating propane (Lb.in2) |
CEV max % |
| 65-80 | 71 | 60-100 | 31 | 239 | 13 | 0.57 |
| 15.0 | 50 | 10-25 | 40 | 490 | 10 | 0.40 |
| 12.5 | 45 | 10-25 | 40 | 450 | 18 | 0.40 |
| 40.0 | 70 | 40-60 | 40 | 310 | 10 | 0.52 |
| 25.0 | 60 | 25-40 | 40 | 400 | 20 | 0.52 |
| 50.0 | 75 | 40-60 | 40 | 300 | 10 | 0.57 |
What Sizes of Ar 500 We Stock
Ar 500 material is in ready stock in the shape of plate in thicknesses of 4 mm to 130 mm and as a sheet in thicknesses of 2 mm – 8.0 mm. Abrex 500 material stocking in sizes up to 3350 mm and lengths up to 14640 mm . Buy Ar 500 Sheet at the best price in thickness from 1650 mm to 16000 mm.
| 1-1/2" | 3/8" | 1/8" | 3/4" | 3" |
| 2" | 1/2" | 3/16" | 1" | 4" |
| 2-1/2" | 5/8" | 1/4" | 1-1/4" |
| Type | Designation | Plate Thickness (mm) | Brinell Hardness (HBW) | Charpy Impact Test (L Direction) | ||
| Range | Aiming | Absorbed Energy (J) | Test Temperature (ºC) | |||
| Standard Type | ABREX 500 | 4.5 mm to 100 mm | 450 ∼ 550 | 500 | – | – |
| Extra Tough Type | ABREX 400LT | 4 mm to 60 mm | 360 ∼ 440 | 400 | ≥27 | -40 |
| ABREX 450LT | 4 mm to 50 mm | 410 ∼ 490 | 450 | ≥27 | -40 | |
| ABREX 500LT | 4.5 mm to 80 mm | 450 ∼ 550 | 500 | ≥21 | -40 | |
| Thickness | Carbon | Silicon |
Manganese |
Phosphorus |
Sulphur |
Chromium |
Nickel |
Molybdenum |
Boron |
| ( Nin. to Max. ) |
max % | max % | max % | max % | max % | max % | max % | max % | max % |
| 04 mm to 13 mm | 0.27 | 0.7 | 1.6 | 0.025 | 0.01 | 1 | 0.25 | 0.25 | 0.004 |
| 13 mm to 32 mm | 0.29 | 0.7 | 1.6 | 0.025 | 0.01 | 1 | 0.5 | 0.3 | 0.004 |
| 32 mm to 40 mm | 0.29 | 0.7 | 1.6 | 0.025 | 0.01 | 1 | 1 | 0.6 | 0.004 |
| 40 mm to 80 mm | 0.3 | 0.7 | 1.6 | 0.025 | 0.01 | 1.5 | 1.5 | 0.6 | 0.004 |
| Material Grade | Mechanical Properties | charpy v notch impact test |
|||
| ABREX 500 | Brinell Hardness/ Thickness in MPa ( Minimum to Maximum in Millimeter ) |
Elongation | Degrees | longitudinal wise | |
| 4 mm to 32MM | 470 mm to 530 mm | Min % | -40 | J | |
| 32 mm to 80mm | 450 mm to 540 mm | 10 | 40 |
||
We Keep Bulk Stock of ABREX 500 Wear Resistance Plate at our stockyard, must know its application and buying tips also, Enquire For Best Rates
Why Plate Abrex 500 is Suitable for dump truck liners
Abrex 500 is an abrasion-resistant grade showing excellent wear and tear resistance. Dump truck liners are susceptible to wear and tear due to the constant movement of material in them. The Abrex 500 Steel Plate grade provides optimum security while ensuring that these liners are also resistant to impact due to its superior hardness.
Buying Tips for ABREX 500 Wear Resistance Plates?
Purchasing any steel product, the main aim should be to focus on quality over anything. Below listed are a few tips to purchase the best products
- Identify key features of the 960 structural steel plate that would suit your operation.
- Purchase products in correct dimensions to avoid unnecessary costs for cutting or shearing.
- Good transportation and logistics help in cutting down costs
- Plan and purchase in bulk to avoid shortages or price rise
- Evaluate the buying options and check payment methods available
- Access test results to eliminate the presence of flaws or defects within the components
Buy from trusted stores to get the best of all the above
- to make Excavators.
- Earthmoving equipment and components
- Skid-Steer Loaders
- Construction and demolition Equipment
- Very Hard Material handling and crushing of strong Metals.
- Mining Machinery and Equipment.
- Making of Trenchers
- Cement Manufacturing and handling other hard Minerals.
- Agricultural machinery which required Digging.
- Trucks, Backhoe Loaders and Bulldozers.
- Dredging equipment
| Brand | Manufacture/Co | Country | Hardness Range |
| Value for AR 500 BHN | |||
| Abrex 500 | NSSMC | Japan | 450-550 |
Leading manufacturers of Abrex 500 Material which we Stock:
Stocking Distributor of Thyssenkrupp, SSAB, Nippon India, ArcelorMittal and JFE Steel for abrex 500 wear resistance material in Mumbai
|
|