Check the Welding Process before purchasing Cut to Size Ar Medium Plate in Large or Small Quantities.
In India and around the world, we are a full-service stocking distributor and wholesaler of high-quality Ar235 Steel Plates.
Table Of Content
Abrasion resistant plates are medium carbon steel components. The Ar235 Plate is a versatile grade that is designed to resist wear in the systems. Designed to provide good stability they have good tolerance to tear and wear compared to standard carbon steel components. The robust ar235 steel has enhanced toughness and has a Brinell hardness of a minimum of 200-250HB. The steel components have moderate strength and can be widely seen in structural grade applications. The Ar235 Steel Plate is designed with a versatile chemical composition consisting of carbon, manganese, phosphorous, sulfur, and silicon. The content gives these plates good tolerance and resistance to different affluents.
The plates in this grade are heat treatable and have enhanced performance. Welding Ar235 Plate offers good welding performance. The plate can be readily machined and processed. One of the major disadvantages of these plates is that they offer significantly lower ductility in comparison to other plates of this grade. The AR235 Alloy Steel Plate has superior mechanical properties in different conditions. Designed with a minimum tensile strength of 621mpa, these plates have minimum yield strength of 483mpa. These plates are mostly selected when the life of critical components has to be extended. They also offer a cost-effective solution in comparison to other highly abrasive materials.
The Ar Medium Plate is commonly employed in conditions where it is susceptible to moderate wear and tear. These plates have considerably lower wear when there is friction and rubbing in the system. These plates can be availed in different sizes and shapes as per you’re requirements. If you want to get a quote on these products or learn more about their features, get in touch with us or visit any of our outlets.
Standard | AR 235 |
Form | Mill Rolled |
Thickness | 3/16 |
Commodity | Plates |
Weight per piece | 383.90 LB |
Length | 120 |
Width | 60 |
Source | Domestic |
see Ar 235 Vs Ar400. Triton has established itself as the most trustworthy trader, stockist, and supplier of AR235 Abrasion-Resistant Steel Plates
Width (in.) | Thickness (in.) | Length (in.) | Price Each |
---|---|---|---|
48 | .187 | 120 | $1,203.44 |
48 | .187 | 96 | $1,058.54 |
48 | .250 | 120 | $1,543.98 |
48 | .250 | 96 | $1,255.36 |
12 | .375 | 24 | $330.84 |
12 | .375 | 12 | $280.32 |
24 | .375 | 24 | $401.94 |
12 | .375 | 48 | $412.72 |
24 | .375 | 48 | $618.00 |
48 | .375 | 96 | $1,583.18 |
24 | .375 | 36 | $518.60 |
12 | .500 | 12 | $290.68 |
48 | .375 | 120 | $1,953.50 |
12 | .500 | 48 | $478.80 |
12 | .500 | 24 | $351.50 |
24 | .500 | 36 | $610.82 |
24 | .500 | 48 | $789.38 |
24 | .500 | 24 | $463.98 |
48 | .500 | 120 | $2,370.28 |
48 | .500 | 96 | $2,052.64 |
12 | .625 | 24 | $373.92 |
12 | .625 | 12 | $301.98 |
24 | .625 | 24 | $522.16 |
12 | .625 | 48 | $537.16 |
24 | .625 | 48 | $908.74 |
48 | .625 | 48 | $1,585.84 |
24 | .625 | 36 | $741.30 |
48 | .625 | 120 | $2,823.78 |
12 | .750 | 12 | $313.36 |
48 | .625 | 96 | $2,358.28 |
12 | .750 | 48 | $624.24 |
12 | .750 | 24 | $396.58 |
24 | .750 | 36 | $825.30 |
24 | .750 | 24 | $608.56 |
48 | .750 | 96 | $2,708.22 |
24 | .750 | 48 | $1,073.60 |
12 | 1.00 | 12 | $335.20 |
48 | .750 | 120 | $3,097.16 |
12 | 1.00 | 48 | $802.94 |
12 | 1.00 | 24 | $467.14 |
24 | 1.00 | 36 | $1,065.22 |
24 | 1.00 | 24 | $783.02 |
48 | 1.00 | 96 | $3,278.48 |
24 | 1.00 | 48 | $1,294.04 |
48 | 1.00 | 120 | $3,886.94 |
compare Ar200 Vs Ar235 Vs Ar225, AR235 Alloy Steel Plate is available in a variety of finishes, sizes, dimensions, and thicknesses, Please contact us for our most recent pricing.
Gauge | Length | Width |
1/2“ | 240/288 | 96 |
5/16“ | 240/288 | 96 |
1/4“ | 240/288 | 96 |
3/8“ | 240/288 | 96 |
Thickness inches. |
lbs. per sq. ft. |
Thickness inches |
lbs. per sq. ft. |
||||||
Tol. Range |
|||||||||
Gage No. | Dec. Equiv. | H.R. & P. & O |
Cold Rolled | Wt. Equiv. | Gage No. | Dec. Equiv. | Tol. Range C.R. |
Wt. Equiv. | |
4 | .2242 | .2332 .2152 |
9.375 | 19 | .0418 | .0458 .0378 |
1.75 | ||
5 | .2092 | .2182 .2002 |
8.75 | 20 | .0359 | .0389 .0329 |
1.5 | ||
6 | .1943 | .2033 .1853 |
8.125 | 21 | .0329 | .0359 .0299 |
1.375 | ||
7 | .1793 | .1873 .1713 |
.1883 .1703 |
7.5 | 22 | .0299 | .0329 .0269 |
1.25 | |
8 | .1644 | .1724 .1564 |
.1734 .1554 |
6.875 | 23 | .0269 | .0299 .0239 |
1.125 | |
9 | .1495 | .1575 .1415 |
.1585 .1405 |
6.25 | 24 | .0239 | .0269 .0209 |
1.0 | |
10 | .1345 | .1425 .1265 |
.1405 .1285 |
5.625 | 25 | .0209 | .0239 .0179 |
.875 | |
11 | .1196 | .1276 .1116 |
.1256 .1136 |
5.0 | 26 | .0179 | .0199 .0159 |
.75 | |
12 | .1046 | .1126 .0966 |
.1106 .0986 |
4.375 | 27 | .0164 | .0184 .0144 |
.688 | |
13 | .0897 | .0967 .0827 |
.0947 .0847 |
3.75 | 28 | .0149 | .0169 .0129 |
.625 | |
14 | .0747 | .0817 .0677 |
.0797 .0697 |
3.125 | 29 | .0135 | .0155 .0115 |
.562 | |
15 | .0673 | .0733 .0613 |
.0723 .0623 |
2.812 | 30 | .0120 | .0130 .0110 |
.50 | |
16 | .0598 | .0658 .0538 |
.0648 .0548 |
2.5 | |||||
17 | .0538 | .0598 .0478 |
.0548 .0498 |
2.25 | |||||
18 | .0478 | .0528 .0428 |
.0518 .0438 |
2.00 |

AR Medium Abrasion Resistant Alloy Steel Plates

AR235 Carbon Steel Sheets

AR MED Steel Plates

Plate Mill Rolled AR MED
- Yield: 70 ksi TYPICAL – NOT INTENDED FOR STRUCTURAL USE
- Tensile: 90 ksi TYPICAL – NOT INTENDED FOR STRUCTURAL USE
- Brinell: 180 min/ 235 nominal
- truck liners
- hoppers
- material chutes
Advantages
This grade shows high abrasion resistance and good hardness.
disadvantage
high carbon steel is that it has lower ductility.
Best Material supplied in Following Projects
Hot Rolled Wear Resistant 5mm Ar235 Carbon Steel Plates
TNC Chemicals Philippines, Inc.

Abrasion Resistant Steel Ar235 Alloy Wear Plates
Chemtrek Industries Bangladesh Limited

2.44m Length AR235 High Strength Steel Sheet Plates
LG Chem Ltd, South Korea

16mm Alloy Steel Ar235 Plates
Chandra Asri Petrochemical (CAP), Indonesia
by delivering high-quality cut-to-length Alloy AR235 Plates, We respect our customers' trust and hope to earn it and excellent service!
Frequenty Used types of Ar235 Plates

AR235 Plates

AR Medium Steel Plates

AR235 Steel Plates

AR235 Alloy Steel Plates

AR 235 Plates

AR235 Abrasion-Resistant Steel Plates
MECHANICAL PROPERTIES | ||
---|---|---|
Imperial | Metric | |
Tensile Strength, Yield | 70,000 psi | 483 MPa |
Tensile Strength, Ultimate | 90,000 psi | 621 MPa |
GRADE | WIDTH (INCHES) | GAUGE (INCHES) | LENGTH (INCHES) |
---|---|---|---|
AR235 | 96 | 0.1875 | 240 |
96 | 0.2500 | 240 | |
96 | 0.3125 | 240 | |
96 | 0.3750 | 240 | |
96 | 0.5000 | 240 | |
96 | 0.6250 | 240 | |
96 | 0.7500 | 240 | |
96 | 1.0000 | 240 |
- It's designed for moderate wear and isn't meant to be used in structural or load-bearing applications.
- AR200 and AR235 are the two grades available.
- 185-255 BHN surface hardness.
- Mills differ in their composition. Each order comes with a surface hardness report.
WIDTH | THICKNESS | LENGTH |
---|---|---|
48" - 120" | 3/16" - 1" | 96" - 480" |
Stocking Distributer of Below leading Manufacturer Plates

Gruppo Lucefin Ar235 Plates

JFE Steel Ar235 Steel Plates

Nippon Steel AR235 Alloy Steel Plates

Arcelor Mittal AR 235 Plates

Sumitomo Metal AR235 Abrasion-Resistant Steel Plates

NSC Steel AR Medium Steel Plates

JFE AR235 Steel Plates

Acroni Nicrodur AR 235 Plates

Satzgitter AR235 Alloy Steel Plates

Dillinger AR235 Abrasion-Resistant Steel Plates

Huta Ar235 Plates

CorusAr235 Steel Plates
AR235 Steel Plates Testing
The metallurgical tests are-
- Ultrasonic test
- Chemical composition analysis
- Positive material identifications
- Micro/ macro test
- Intergranular corrosion test
- Pitting corrosion test
- Radiography
The destructive tests are-
- Thermal performance test
- Hardness test
- Tensile test
- Hydro testing
- Flaring test
- Mechanical properties testing
- Flattening test
SI | C | P | MN | S |
---|---|---|---|---|
0.35% | 0.4% | 0.025% | 1.5% | 0.010% |
AR235 Plates |
# Per Sq. Foot |
1/4 |
10.3 per sq. ft. |
3/16 |
8 per sq. ft. |
1/2 |
20.6 per sq. ft. |
3/8 |
15.5 per sq. ft. |
3/4 |
31.1 per sq. ft. |
5/8 |
25.9 per sq. ft. |
1 |
41.5 per sq. ft. |
AR-235 may be manufactured within appropriate restrictions in terms of forming, machining, and welding. By carefully managing chemical composition, AR-235 provides abrasion resistance without the need for heat treatment. Steels of this hardness, on the other hand, are more difficult to produce than ordinary structural grades. Although hole punching up to 3/8" thick is feasible, drilling is typically preferred. Cold forming and bending are also achievable to a limited extent.
AR Medium Steel Plates Weight chart
Thickness | Lbs. Per Square Foot Weight | Lbs. Per Square Inch Weight |
---|---|---|
3/16″ | 8# per sq. ft. | .0055 |
1/8″ | 5-1/4 # per sq. ft. | .00365 |
5/16″ | 12# per sq. ft. | .0083 |
1/4″ | 10-1/2# per sq. ft. | .0073 |
1/2″ | 20-3/4# per sq. ft. | .0145 |
3/8″ | 15-1/2# per sq. ft. | .0108 |
5/8″ | 26# per sq. ft. | .0180 |
1″ | 41-1/2# per sq. ft. | .0290 |
3/4″ | 31-1/4# per sq. ft. | .0218 |
1-1/4″ | 52# per sq. ft. | .0363 |
AR 235 Plates Thickness Tolerance
Thickness | 1250 mm wide sheet metal | 1000 mm wide sheet metal |
---|---|---|
0.6 to 0.79 | 0.05 mm | 0.05 mm |
0.8 to 0.99 | 0.06 mm | 0.055 mm |
2.5 to 2.99 | 0.12 mm | 0.11 mm |
1.2 to 1.49 | 0.08 mm | 0.07 mm |
3.0 to 3.99 | 0.14 mm | 0.13 mm |
2.0 to 2.49 | 0.1 mm | 0.09 mm |
1.0 to 1.19 | 0.07 mm | 0.06 mm |
1.5 to 1.99 | 0.09 mm | 0.08 mm |
Ar235 Steel Plates processing
- Temper Passed Smooth-Flat Surface
- Steel Shot Blasting
- Laser and Plasma Cutting
- Plates Rolling
- Press-Brake
- Welding
ARMED Plates technical dimensions
Size in Inches | Est. Plate Wt. | Nominal Thickness | Wt. per SqFt in Lbs. |
---|---|---|---|
1 | 1 mm | ||
48 X 96 | 1306.88 | 1 mm | 40.84 per sq. ft. |
48 X 120 | 1633.54 | 1 mm | 40.84 per sq. ft. |
96 X 144 | 3920.64 | 1 mm | 40.84 per sq. ft. |
96 X 240 | 6534.2 | 1 mm | 40.84 per sq. ft. |
96 X 288 | 7841.28 | 1 mm | 40.84 per sq. ft. |
0.5 | 1/2 mm | ||
48 X 96 | 653.44 | 1/2 mm | 20.42 per sq. ft. |
48 X 120 | 816.8 | 1/2 mm | 20.42 per sq. ft. |
60 X 120 | 1020.96 | 1/2 mm | 20.42 per sq. ft. |
72 X 120 | 1225.2 | 1/2 mm | 20.42 per sq. ft. |
96 X 144 | 1960.25 | 1/2 mm | 20.42 per sq. ft. |
96 X 240 | 3267 | 1/2 mm | 20.42 per sq. ft. |
96 X 288 | 3920.64 | 1/2 mm | 20.42 per sq. ft. |
0.25 | 1/4 mm | ||
48 X 96 | 326.72 | 1/4 mm | 10.21 per sq. ft. |
48 X 120 | 408.4 | 1/4 mm | 10.21 per sq. ft. |
60 X 120 | 510.5 | 1/4 mm | 10.21 per sq. ft. |
72 X 120 | 612.6 | 1/4 mm | 10.21 per sq. ft. |
96 X 144 | 980.16 | 1/4 mm | 10.21 per sq. ft. |
96 X 240 | 1633.6 | 1/4 mm | 10.21 per sq. ft. |
96 X 288 | 1960.32 | 1/4 mm | 10.21 per sq. ft. |
0.75 | 3/4 mm | ||
48 X 96 | 980.16 | 3/4 mm | 30.63 per sq. ft. |
48 X 120 | 1225.2 | 3/4 mm | 30.63 per sq. ft. |
96 X 144 | 2940.48 | 3/4 mm | 30.63 per sq. ft. |
96 X 240 | 4900.6 | 3/4 mm | 30.63 per sq. ft. |
96 X 288 | 5880.96 | 3/4 mm | 30.63 per sq. ft. |
0.375 | 3/8 mm | ||
48 X 96 | 489.92 | 3/8 mm | 15.31 per sq. ft. |
48 X 120 | 612.4 | 3/8 mm | 15.31 per sq. ft. |
60 X 120 | 766 | 3/8 mm | 15.31 per sq. ft. |
72 X 120 | 918.6 | 3/8 mm | 15.31 per sq. ft. |
96 X 144 | 1470.88 | 3/8 mm | 15.31 per sq. ft. |
96 X 240 | 2450.4 | 3/8 mm | 15.31 per sq. ft. |
96 X 288 | 2939.52 | 3/8 mm | 15.31 per sq. ft. |
0.1875 | 3/16 mm | ||
48 X 96 | 245.12 | 3/16 mm | 7.66 per sq. ft. |
48 X 120 | 306.4 | 3/16 mm | 7.66 per sq. ft. |
60 X 120 | 245.12 | 3/16 mm | 7.66 per sq. ft. |
72 X 120 | 459.6 | 3/16 mm | 7.66 per sq. ft. |
96 X 144 | 735.36 | 3/16 mm | 7.66 per sq. ft. |
96 X 240 | 1225.2 | 3/16 mm | 7.66 per sq. ft. |
96 X 288 | 1470.72 | 3/16 mm | 7.66 per sq. ft. |
0.625 | 5/8 mm | ||
96 X 240 | 4083.8 | 5/8 mm | 25.52 per sq. ft. |
96 X 288 | 4899.84 | 5/8 mm | 25.52 per sq. ft. |
0.3125 | 5/16 mm | ||
96 X 240 | 2041.6 | 5/16 mm | 12.76 per sq. ft. |
96 X 288 | 2449.92 | 5/16 | 12.76 per sq. ft. |