Sa516 Grade 70 Boiler Plate Supplier In India, We stock and provide A516 70 Material obtained from the best mills, see our Price Per Kg In India
you're looking for authentic Astm A516 Gr 70n Standard Plate Stockists In India? IS 2041 R260 Plate As Rolled with Custom Thickness Availability is available from us.
Table Of Content
- What Exactly SA 516 grade 70 Plate?
- Sa 516 Gr 70 Price Per Kg In India
- Most Common types ASTM A 516 GR 70 Plate
- Sa 516 Gr 70 Material Specification
- sa 516 gr 70 vs 70n
- Technical Dimensions of ASTM A516 GR70 Plate
- Sa 516 Gr 70 Standard Plate Thickness Chart
- sa 516 gr 70 vs is 2062
- Thickness Tolerance of ASME SA 516 GR 70 Plate
- Sa 516 Gr.70 Equivalent En Standard
- Astm A516 Grade 70 Mechanical Properties
- Sa 516 Gr 70 Chemical Composition
- ASTM A516 Gr 70 Plate Weight Chart
- What is Difference between grade 60 and 70?
- SA 516 Gr 70 Yield and Tensile Strength
- Standard Size SA 516 Gr 70 Carbon Steel Plate
- SA516 GR70N Plate Advantages
- Density of Gr 70 Killed Carbon Steel Plate
- Jindal SA 516 Gr 70 Boiler Plates Available Sizes
- A516 Grade 70 Boiler Quality Plate Properties
- ASTM A516-70 Plate As Rolled Application
- Astm A516 Gr 70n Plate Stock list
- Certificate of Sa 516 K02700 Grade 70 Plate
- Stocking Distributors of Below Manufacturer
SA 516 grade 70 steel is a fine-grained pressure vessel grade. The Sa 516 Grade 70 Plates is designed with a superior concentration of chromium, nickel, and molybdenum. The superior concentration of the Asme Sa516 Grade 70 Plates allows these modules to have outstanding resistance against corrosive and oxidative media. The Sa516 Grade 70 Boiler Plates has good strength and performs well in low temperatures and moderately high temperatures in stress-induced systems.
Steel Plate Sa516 Grade 70 shows excellent tolerance against sulfuric acids and chloride tainted acidic mediums in harsh environments. The Sa 516 Gr 70 Standard Plate also shows enhanced resistances against Hic and hydrogen sulfide. Designed with superior chemical properties the Sa 516 K02700 Grade 70 Plate is widely seen in the oil, gas, and petrochemical industry.
Description | Unit | Per Unit (INR) |
---|---|---|
CUTTING SIZE: 2200MM X 4790MM SIZE: 2438MM X 6096 MM X 14MM THK - ASME SA 516 GR. 70N CARBON STEEL HOT ROLLED PLATES | KGS | 60 |
ASME SA 516 GR. 70N HOT ROLLED CARBON STEEL PLATES - SIZE: 2438MM X 6096 MM X 16MM THK | KGS | 60 |
SIZE: 2438MM X 6096 MM X 14MM THK ASME SA 516 GR. 70N CARBON STEEL HOT ROLLED PLATES | KGS | 60 |
ASME SA 516 GR.70, NACE MR-0-175. CARBON STEEL PLATES SIZE : 1 MTR X 1 MTR X 10 MM THK | NOS | 107,288 |
ASME SA 516 GR. 70N SIZE: 2438MM X 6096 MM X 16MM THK HOT ROLLED CARBON STEEL PLATES | KGS | 60 |
CUTTING SIZE: 1865 MM X 16 MM T HOT ROLLED CARBON STEEL PLATES ASME SA 516 GR. 70N | KGS | 60 |
SIZE: 2438MM X 6096 MM X 14MM THK ASME SA 516 GR. 70N HOT ROLLED CARBON STEEL PLATES | KGS | 60 |
Check Difference of sa 516 gr 70 price per kg in India and USA
Prices of steel keep fluctuating based on supply and demand. The sa 516 gr 70 price per kg in India starts at $ 0.89 and can go up to $ 1.57. The material properties and logistics involved influence the Sa516 Grade 70 Price. Another important factor that plays an important role in influencing the versatile grade Sa 516 Gr 70 Plate Price is the availability of the raw material. With growing demands and material shortages, the prices of these modules change over time. The Sa 516 Gr 70 Price Per Kg in the USA is between $2.33 to $3.11.

Asme Sa516 Grade 70 Plate

Sa 516 K02700 Grade 70 Plate

IS 2041 R260 Plate

Sa 516 Gr 70 Standard Plate

ASTM A516 Grade 70 Plate

ASME SA516 Gr. 70 Carbon Steel Plate

ASME SA516 Grade 70 6m Length Boiler Sheet

SA516 Gr70 High Quality Low Alloy Structural Steel Plate

SA516 Gr70 Clad Plate

High Pressure Vessel Steel Plate SA516 Gr. 70

Carbon Steel Plate SA516 Gr 70

200mm Thick SA516 GR 70 Pressure Vessel Plate
Material | ASTM A516/ ASME SA 516 Grade 70 (Pressure Vessel Grade) |
Test certificates | Nace, HIC Tested, EN 10204 2.2/ 3.1 / 3.2 |
Surface | Painted, Natural |
Dimensions |
|
Wide range of dimensions |
|
Brands | JSW, Dillinger, SAIL, TATA, Thyssen, Essar, POSCO, Uttam, Clabecq, JSPL, and Mills |
Manufacturing Types: | Hot Rolled |
Heat Treatment | Normalised/Rolled/N+T/QT |
German Steel – Dillinger, Thyssen, | |
Uses |
|
ASTM A516 Grade 70 Plate Thickness Availability
Grade | Max. Thickness (MM) |
70 [485] | 8 [205] |
Dealers of Jindal SA 516 Gr 70 Boiler Plates in Mumbai, At a reasonable price, we offer Sa 516 K02700 Grade 70 Plate with various test certification reports and MTC.
Lengths | Thickness in Inches | Widths | Lbs/Sft |
---|---|---|---|
96,110, 120, 144, 240 | 1/4 | 96, 48, 60, 72, 84 | 10.210 |
124,133, 144, 156, 96, 240, 120 | 3/16 | 72, 96, 48, 60, 84 | 7.660 |
120, 96, 240 | 5/16 | 60, 48, 72, 96 | 12.760 |
120, 260, 144, 169, 240, 96 | 3/8 | 60, 72, 48, 84, 96 | 15.320 |
240 | 7/16 | 96 | 17.870 |
120, 144, 240, 96 | 1/2 | 48, 96, 84, 60, 72 | 20.420 |
240, 120, 480 | 5/8 | 96, 48 | 25.530 |
120, 480, 240, 96 | 3/4 | 96, 84, 48, 72 | 30.630 |
240 | 7/8 | 96 | 35.740 |
240, 96, 120, 480 | 1 | 72, 48, 96 | 40.840 |
240 | 1 1/8 | 96 | 45.950 |
120, 96, 240 | 1 1/4 | 96, 48 | 51.050 |
240 | 1 3/8 | 96 | 56.160 |
240, 120 | 1 1/2 | 61.260 | |
240 | 1 5/8 | 66.370 | |
240 | 1 3/4 | 71.470 | |
240, 120 | 2 | 81.680 | |
240 | 2 1/4 | 91.890 | |
240 | 2 1/2 | 102.100 | |
240 | 2 3/4 | 112.310 | |
240 | 3 | 122.520 | |
144 | 3 1/4 | 132.730 | |
120 | 3 1/2 | 142.940 | |
120 | 3 3/4 | 153.150 | |
180, 144 | 4 | 163.360 | |
120 | 4 1/4 | 173.570 | |
120 | 4 1/2 | 183.780 | |
144 | 5 | 204.200 | |
120 | 6 | 245.040 | |
160 | 7 | 285.880 |
Grade | Max. Thickness (MM) |
70 [485] | 8 [205] |
Plate thickness tolerance is the minus tolerance of the plate to the lowest acceptable limit of its nominal thickness. For Sa 516 Gr 70 Plate whose thickness is between 3mm to 16mm, the thickness tolerance is 1.78mm.
Tensile Properties (Transverse) | Thickness (mm) | |||
16 < t ≤ 40 | t ≤ 16 | 40 < t ≤ 150 | ||
Tensile Strength (Mpa) | Guaranteed Min | 485 | 485 | 485 |
Typical | 485 – 620 | 485 – 620 | 485 – 620 | |
Yield Strength (Mpa) | Guaranteed Min | 295 | 305 | 275 |
Typical | 370 – 470 | 360 – 520 | 290 – 420 | |
Elong. On 5.65√S0 (%) | Guaranteed Min | 17 | 17 | 17 |
Typical | 22 – 33 | 22 – 34 | 22 – 31 | |
HARDNESS | TYPICAL | 130 – 170BHN | ||
AVAILABLE THICKNESS | 6mm – 150mm |
Sa 516 Grade 70 Machinability
The pressure vessel grade has fair but not exceptional machinability. The high-yield strength grade doesn’t offer superior formability as other grades.
The Sa 516 Gr 70 grade is available in standard thickness between 6mm up to 150mm or more. These plates have widths between 1000mm up to 4500mm with lengths between 3000mm to 18000mm. These plates have standard sizes of 1/2, 1/4, 1/8, 1, 1-1/2, 1-1/4, 2, 2-1/2, 3, 3/4., 3/8, 3/16, and 5/8.
WIDTH | THICKNESS | LENGTH |
---|---|---|
48" to 120" | 3/16" to 6" | 96" to 480" |
A516 is a high-quality pressure vessel steel plate with excellent notch toughness. It has great weldability and can withstand temperatures ranging from moderate to low. One drawback is that it is difficult to mould or manufacture.
Property | Value | Temperature |
---|---|---|
Density | 7.85 g/cm³ | 23.0 °C |
Machining
A516 has fair machinability.
Welding
It has excellent weldability.
Heat Treatment
A516 is heat treatable.
Steel Plate Sa516 Grade 70 Electrical Properties
Electrical Properties | English | Metric | Comments |
---|---|---|---|
Electrical Resistivity | 0.0000170 ohm-cm | 0.0000170 ohm-cm | Typical Carbon Steel |
Thermal Properties of Sa516 Grade 70 Boiler Plate
Thermal Properties | English | Metric | Comments |
---|---|---|---|
Specific Heat Capacity | 0.112 BTU/lb-°F | 0.470 J/g-°C | Typical Carbon Steel |
CTE, linear | 6.67 µin/in-°F | 12.0 µm/m-°C | |
Thermal Conductivity | 361 BTU-in/hr-ft²-°F | 52.0 W/m-K |
Stockholder of SA 516 Gr.70 Boiler & Pressure Vessel Steel Plates in Mumbai at the most affordable prices, offer a large range of high-performance Steel Plate Sa516 Grade 70, check sa 516 gr 70 vs 70n.
A sa 516 gr 70 and 70n are pressure vessel grades that can be differentiated based on certain features.
- Astm A516 Gr 70n is a metal in a normalized condition. The Sa A516 Gr 70 is not subjected to the normalizing process.
- The normalized A516 70n grade possesses superior ductility and toughness over the A516 70 Material.
Various Types of ASTM A516 Gr 70 Plate

Sa 516 Grade 70 Plate

ASTM A516 Gr 70 Plate

Steel Plate Sa516 Grade 70

Astm A516 Gr 70n Plate

Sa516 Grade 70 Boiler Plate

Astm A516 Gr 70 Material
Exporter of Asme Sa516 Grade 70 Plate in India, Before supplying ASTM A516 Grade 70 Boiler Quality Plate, we adjust to the unique needs of the client, get Weight Calculator and sa 516 gr 70 vs is 2062
- Sa 516 gr 70 is an ASTM A516 specification that covers standard pressure vessel plates or carbon steel in moderate and low-temperature systems. The vessels possess excellent notch toughness.
- IS 2062 is a standard specified by the Bureau of Indian Standards. This specification covers standard structural steel hot rolled medium and high tensile steel. The grades in this range offer enhanced formability, machinability, and weldability.
Are you seeking for manufacturers of Sa 516 Gr 70 Plate in India? To ensure that the end-product quality is reached, we supply ASTM A516 Grade 70 Steel Plates by undergoing rigorous tests.
The Sa 516 Gr.70 is an ASTM/ASME grade. The Equivalent En Standard of this grade is the EN 10028 P355GH grade.
Standard | Description |
ASME/ ASTM | SA516 / A516 Grade 70 |
DIN | - |
British | BS1501-224-490A/B |
European EN | EN10028 P355GH |
DESCRIPTION | GRADE 70 |
---|---|
Tensile strength | ksi 70-90 |
Tensile strength | MPa 485-620 |
Yield strength | ksi 38 |
Yield strength= | MPa 260 |
Elongation in 200mm (minimum)(%) | 17 |
Elongation in 50mm (minimum) (%) | 21 |
Composition | Percentage % | Composition | Percentage % |
C | 0.10/ 0.22 | Cu | 0.3 |
Si | 0.6 | Ni | 0.3 |
Mn | 1/ 1.7 | Mo | 0.08 |
P | 0.03 | Nb | 0.01 |
S | 0.03 | Ti | 0.03 |
Al | 0.02 | V | 0.02 |
Cr | 0.3 |
Size in In. | Weight per Square Foot. in Lbs. |
---|---|
3/16 x 48 | 7.660 |
3/16 x 36 | 7.660 |
3/16 x 60 | 7.660 |
3/16 x 54 | 7.660 |
3/16 x 84 | 7.660 |
3/16 x 96 | 7.660 |
3/16 x 72 | 7.660 |
3/16 x 120 | 7.660 |
1/4 x 48 | 10.210 |
1/4 x 60 | 10.210 |
1/4 x 36 | 10.210 |
1/4 x 84 | 10.210 |
1/4 x 96 | 10.210 |
1/4 x 72 | 10.210 |
5/16 x 36 | 12.760 |
1/4 x 120 | 10.210 |
5/16 x 120 | 12.760 |
5/16 x 60 | 12.760 |
5/16 x 48 | 12.760 |
5/16 x 96 | 12.760 |
5/16 x 72 | 12.760 |
3/8 x 36 | 15.320 |
3/8 x 60 | 15.320 |
3/8 x 72 | 15.320 |
3/8 x 48 | 15.320 |
3/8 x 84 | 15.320 |
3/8 x 120 | 15.320 |
7/16 x 84 | 17.870 |
3/8 x 96 | 15.320 |
1/2 x 48 | 20.420 |
1/2 x 60 | 20.420 |
3/16 x 96 | 17.870 |
1/2 x 84 | 20.420 |
1/2 x 96 | 20.420 |
1/2 x 72 | 20.420 |
1/2 x 120 | 20.420 |
9/16 x 96 | 22.970 |
9/16 x 84 | 22.970 |
5/8 x 48 | 25.530 |
5/8 x 72 | 25.530 |
5/8 x 60 | 25.530 |
5/8 x 96 | 25.530 |
5/8 x 120 | 25.53 |
5/8 x 84 | 25.530 |
3/4 x 48 | 30.630 |
3/4 x 72 | 30.630 |
3/4 x 84 | 30.630 |
3/4 x 60 | 30.630 |
3/4 x 120 | 30.630 |
7/8 x 72 | 35.740 |
3/4 x 96 | 30.630 |
7/8 x 84 | 35.740 |
1 x 48 | 40.840 |
1 x 60 | 40.840 |
7/8 x 96 | 35.740 |
1 x 72 | 40.840 |
1 x 96 | 40.840 |
1 x 120 | 40.840 |
1 x 84 | 40.840 |
1 1/8 x 60 | 45.950 |
1 1/8 x 84 | 45.950 |
1 1/8 x 96 | 45.950 |
18 x 60 | 735.000 |
1 1/8 x 78 | 45.950 |
1 1/4 x 60 | 51.050 |
1 1/4 x 72 | 51.050 |
1 1/4 x 48 | 51.050 |
1 1/4 x 96 | 51.050 |
1 1/4 x 84 | 51.050 |
1 1/4 x 120 | 51.050 |
2 x 48 | 81.680 |
1 3/8 x 96 | 56.160 |
1 3/8 x 84 | 56.160 |
1 1/2 x 48 | 61.260 |
1 3/4 x 96 | 71.470 |
1 1/2 x 72 | 61.260 |
1 1/2 x 84 | 61.260 |
1 1/2 x 60 | 61.260 |
1 3/4 x 72 | 71.470 |
1 1/2 x 120 | 61.260 |
1 1/2 x 96 | 61.260 |
1 5/8 x 84 | 66.370 |
1 5/8 x 96 | 66.370 |
1 3/4 x 84 | 71.470 |
2 x 60 | 81.680 |
2 1/4 x 72 | 91.890 |
2 x 84 | 81.680 |
2 x 96 | 81.680 |
2 1/2 x 60 | 102.100 |
2 x 72 | 81.680 |
2 1/8 x 96 | 86.790 |
2 1/4 x 84 | 91.890 |
2 1/4 x 96 | 91.890 |
2 1/2 x 96 | 102.100 |
2 3/4 x 72 | 112.300 |
2 1/2 x 72 | 102.100 |
2 3/4 x 84 | 112.300 |
3 1/2 x 72 | 142.900 |
2 3/4 x 96 | 112.300 |
2 1/2 x 84 | 102.100 |
3 x 84 | 122.500 |
3 1/4 x 84 | 132.700 |
3 1/4 x 96 | 132.700 |
3 x 72 | 122.500 |
3 1/2 x 84 | 142.900 |
4 x 72 | 163.400 |
3 1/2 x 96 | 142.900 |
3 3/4 x 84 | 153.200 |
3 x 96 | 122.500 |
3 3/4 x 96 | 153.200 |
4 x 84 | 163.400 |
4 x 96 | 163.400 |
4 1/4 x 84 | 173.600 |
4 1/4 x 96 | 173.600 |
4 1/2 x 72 | 183.800 |
4 1/4 x 72 | 173.600 |
4 1/2 x 84 | 183.800 |
4 3/4 x 96 | 194.000 |
4 3/4 x 5 X 60 | 204.200 |
4 1/2 x 96 | 183.800 |
4 3/4 x 72 | 204.200 |
4 3/4 x 96 | 204.200 |
5 1/2 x 60 | 224.600 |
5 1/2 x 72 | 224.600 |
4 3/4 x 84 | 204.200 |
5 1/2 x 96 | 224.600 |
6 x 72 | 245.000 |
5 1/2 x 84 | 224.600 |
6 x 84 | 245.000 |
6 1/2 x 60 | 265.500 |
6 x 96 | 245.000 |
6 1/2 x 84 | 265.500 |
7 x 84 | 285.900 |
6 1/2 x 96 | 265.500 |
7 x 96 | 285.900 |
7 1/2 x 96 | 306.300 |
8 x 72 | 326.700 |
7 1/2 x 84 | 306.300 |
8 x 84 | 326.700 |
9 x 60 | 367.600 |
8 x 96 | 326.700 |
9 x 84 | 367.600 |
10 x 60 | 408.400 |
9 x 96 | 367.600 |
10 x 84 | 408.400 |
12 x 84 | 490.100 |
10 x 96 | 408.400 |
14 x 72 | 571.800 |
- Yield Strength: 38 ksi
- Tensile Strength: 70-90 ksi
The maximum strength is Grade 70. The tensile strengths of the other three grades, including grade 60, are all lower. Grade 60 has a tensile strength ranging from 415 to 550 MPa, while grade 70 has a tensile strength ranging from 485 to 620 MPa.
3/8" | 1-1/2" | 1/8" | 3/4" | 3" | |
1/2" | 2" | 3/16" | 1" | 4" | |
5/8" | 2-1/2" | 1/4" | 1-1/4" | ||
*1/8 inch "Only one size of thick plate is available: 60"x 120". Only 48" x 144" and 96" x 144" of the 3/6" thick plate are available ".. |
- Structural tubing
- Buildings
- Bridges
- Transmission poles
- Automotive and truck parts
- Tote boxes
- Cargo containers
- Construction equipment
- Lighting standards
- Railroad cars
12 x 2500 x 12000 | 12 x 2000 x 12000 | 14 x 2000 x 5400 | 14 x 2000 x 12000 | 14 x 2500 x 12000 |
8 x 2500 x 12000 | 6 x 2000 x 12000 | 10 x 2500 x 12000 | 10 x 2000 x 12000 | 10 x 2500 x 6000 |
25 x 2500 x 9000 | 25 x 2500 x 12000 | 32 x 2500 x 3000 | 32 x 2500 x 6000 | 36 x 2500 x 6000 |
16 x 2500 x 12000 | 16 x 2000 x 12000 | 20 x 2500 x 12000 | 18 x 2500 x 12000 | 22 x 2000 x 11500 |
40 x 2500 x 7000 | 40 x 2500 x 6000 | 90 x 2500 x 6800 | 75 x 2500 x 4100 | 90 x 1500 x 2700 |
- Third Party Inspection Report, etc
- Raw Materials Certificate
- EN 10204/3.1B,
- 100% Radiography Test Report
![]() | ![]() | ![]() | ![]() |
Dillinger | Arcelor Mittal | Posco | SAIL |
![]() | ![]() | ![]() | |
Jindal Steel | Essar | Welspun |