ASME SA 537 CL.1 Plate Supplier in India, Offer A537 Plate in Custom Sizes, View Class 1 Vs 2
Table Of Content
- ASTM A537 Class 1 Vs 2
- ASTM A537 Class 1 Steel Plate Specification
- Weldability Of A537 Plate
- SA 537 Cl.1 Plate Temprature
- Price of A537 Plate in india
- A537 Plate Available Sizes
- Common Types of Astm A537 Class 1 Steel Plate
- ASME SA537 Class 1 Equivalent Standard
- ASTM A537 Class 1 Carbon Steel Plates Mechanical Properties
- ASTM A537 Class 1 Boiler Quality Plate Chemical Composition
- SA 537 Plates Application
- Heat Treatment of ASTM A537 Class 1 Steel Plate
- Stocking Distributors of below
- ASME SA 537 CL.1 Plates Supplementary Requirements
The main distinction between these grades is their strength.
- The minimum tensile strength of Class 1 is 450 MPa, while the minimum yield strength is 310 MPa.
- The tensile strength of the modules in class 2 is 485 MPa, with a yield strength of 315 MPa.
Triton Alloys Inc. is SA 537 plates suppliers, offer Astm A537 Class 1 Steel which is a pressure vessel heat-treated carbon grade. The Astm A537 Class 1 Steel Plate is designed with a chemical composition of carbon, chromium, nickel, molybdenum, manganese, silicon, phosphorous, copper, and sulfur. This gives the plates designed in thickness above 6mm enhanced resistance to corrosive and reducing media. The Sa 537 Cl 1 Plate is seen in high pressures and temperature systems where there are higher chances of failure and tear within the system.
These plates are heat-treated and supplied in normalized conditions. ASTM A537 Cl 1 Plates are generally welded in place making use of the fusion welding procedure. As these plates are designed to withstand vigorous working conditions, the welding should be of the highest quality. These plates are quality assured and can be custom designed in different shapes and sizes as per different customer requirements.
The ASTM A537 Steel Plate is designed with superior mechanical properties. These plates have minimum yield strength of 310mpa with a tensile strength between 485mpa to 620mpa and can be elongated by 22% in the system. ASTM A537 Class 1 Boiler Quality Plate has superior strength and load-bearing capacity. These boiler quality plates process and store toxic gases and fluids to produce steam in the system. They are well suited to work in temperatures up to 371 degrees C and as low as -46 degrees C. The equivalent grades of the ASTM A537 Class 1 Carbon Steel Plates are the DIN 19Mn5 and SPV36 standards. All these plates are produced under the watchful eye of our experienced staff. If you have any questions or want to get a quote on these components, visit any of our outlets or contact us for more information.
As SA 537 Plate Stockist, Purchase ASTM A537 Class 1 Carbon Steel Plates For Pressure Vessels With MTC and Specific Stampings
| Material | ASTM A537 Class 1 Carbon/ Pressure Vessel |
| Condition | normalized |
| A537 Class 1 Dimensions |
|
| Test certificates | As SA 537 Plates Suppliers in India Offer EN 10204 2.2/3.1 Certificate |
| SA 537 Cl.1 Plates Manufacturing method | Hot Rolled |
| Brands | JSPL, Thyssen, Essar, POSCO, JSW, TATA, Clabecq, Uttam, Dillinger, SAIL, and Mills |
| Surface | Painted, Natural |
| Uses |
|
| Third Party Inspection | CE, DNV, KR, TUV, RINA, CCS, GL, LR, ABS |
| Welding Process | Minimum Preheat and Interpass Temperature (°F [°C]) | Thickness (in. [mm]) | Consumables |
|---|---|---|---|
| Shielded Metal Arc (SMAW) | 50 [10] | >3/4 to 1.5 [19 – 38] | E7016-X, AWS E7015-X, E7018-X |
| Flux Cored Arc (FCAW) | 150 [65] | >1.50 to 2.00 [>38 to 50] | AWS E7XTX-X |
| Shielded Metal Arc (SMAW) | 50 [10] | ≤3/4 [≤19] | E7016-X, AWS E7015-X, E7018-X |
| Gas Metal Arc (GMAW) | 50 [10] | ≤3/4 [≤19] | AWS ER70S-X |
| Shielded Metal Arc (SMAW) | 150 [65] | >1.50 to 2.00 [>38 to 50] | E7016-X, AWS E7015-X, E7018-X |
| Gas Metal Arc (GMAW) | 50 [10] | >3/4 to 1.5 [19 – 38] | AWS ER70S-X |
| Submerged Arc (SAW) | 50 [10] | ≤3/4 [≤19] | AWS F7XX-EXXX-XX |
| Gas Metal Arc (GMAW) | 150 [65] | >1.50 to 2.00 [>38 to 50] | AWS ER70S-X |
| Submerged Arc (SAW) | 50 [10] | >3/4 to 1.5 [19 – 38] | AWS F7XX-EXXX-XX |
| Flux Cored Arc (FCAW) | 50 [10] | ≤3/4 [≤19] | AWS E7XTX-X |
| Submerged Arc (SAW) | 150 [65] | >1.50 to 2.00 [>38 to 50] | AWS F7XX-EXXX-XX |
| Flux Cored Arc (FCAW) | 50 [10] | >3/4 to 1.5 [19 – 38] | AWS E7XTX-X |
SA 537 CL.1 Boiler & Pressure Vessel Steel Plates Distributor, Come in a Variety of Surface Finish, Check Temperature
| Plate Type | Temprature |
|---|---|
| SA 537 Cl.1 Plate | -46°C to 371°C |
| Description | Price |
|---|---|
| A537 Hot Rolled Alloy Structurel Plate | US $ 500-900 / Ton |
| A537 Cl 1 Steel Plate | US $ 680-1600 / Ton |
| ASTM A537 Cl1 Normalized Pressure Vessel Plate | US $ 499-599 / Ton |
| ASTM/ASME A537 Boiler Steel Plate | US $ 600-800 / Ton |
| ASTM A537 Class 1 Plate with 3mm Thick | US $ 500-600 / Ton |
| ASTM A537 Cl2 Carbon Plates | US $ 600-800 / Ton |
| SA 537 Plates Stockist in India | WIDTH | THICKNESS | LENGTH |
|---|---|---|---|
| CLASS 1 | 48" – 120" | 3/16" – 4" | UP TO 480" |
ASTM A537 Class 1 Steel Plate
Sa 537 Cl 1 Plate
ASTM A537 Steel Plate
ASTM A537 Class 1 Boiler Quality Plate
ASTM A537 Cl 1 Plates
ASTM A537 Class 1 Carbon Steel Plates
As SA 537 Cl.1 Grades Suppliers, All Quality Criteria Are Observed When Supplying Astm A537 Class 1 Boiler Quality Plate, View Equivalent
| Steel Grade | Germany | JIS |
|---|---|---|
| A537 / SA537 | 19Mn5 | SPV36 |
| ASTM/ASME | DIN17155 | G3115 |
| Class | Heat Treatment | Thickness | Yield Strength, min, ksi [MPa] |
Tensile Strength, min, ksi [MPa] |
|---|---|---|---|---|
| Class 1 | Normalized | 21/2 inch and under [65 mm and under] | 50 ksi [345] |
70 ksi [485] |
| Over 21/2 inch [Over 65 mm] |
45 ksi [310] |
65 ksi [450] |
||
| Class 2 | Quenched and tempered | 21/2 inch and under [65 mm and under] | 60 ksi [415] |
80 ksi [550] |
| Over 21/2 to 4 inch [Over 65 to 100 mm] |
55 ksi [380] |
75 ksi [515] |
||
| Over 4 inch [Over 100 mm] |
46 ksi [315] |
70 ksi [485] |
||
| Class 3 | Quenched and tempered | 21/2 inch & under [65 mm and under] | 55 ksi [380] |
80 ksi [550] |
| Over 21/2 to 4 inch [Over 65 to 100 mm] |
50 ksi [345] |
75 ksi [515] |
||
| Over 4 inch [Over 100 mm] |
40 ksi [275] |
70 ksi [485] |
| ELEMENTS | ASTM A537 |
| CARBON (C) | 0.24% |
| MANGANESE (Mn) | 0.70-1.60% |
| PHOSPHORUS (Ph) MAX | 0.025% |
| SULFUR (S) MAX | 0.025% |
| SILICON (Si) | 0.15-0.50% |
| COPPER Maximum | 0.35% |
| NICKEL Maximum | 0.25% |
| CHROMIUM Maximum | 0.25% |
| MOLYBDENUM Maximum | 0.08% |
As SA 537 Cl.1 Plate Stockist and Dealer Provides a Wide Range of ASTM A537 Class 1 Steel Plates For Various Types of Applications
- Construction of bridges
- architectural structures or Pylons
- Machine building
- Lifting and mobile equipment
- Crane booms
- Wearing plates
- Iron chutes or Stone
- Framework structures
- Truck frames
- Rail cars
- Containers
Normalization of ASTM A537 Class 1 plates is required.
 |
 |
 |
 |
| SAIL | SSAB | ESSAR | JINDAL |
 |
 |
 |
 |
| ACRONIS | UTTAM | NIPPON & SUMITOMO | POSCO |
- S3: Simulated pos-weld heat treatment of mechanical
- S8: Ultrasonic Examination
- S18: Maximum Tensile strength
- S15: Reduction of area measurement and test coupons
- S2. Product Analysis
- S30：Charpy V notch impact test for structural shapes
- S6: Drop weight test