Carbon Steel Plate

 

Considered to be the most economical steel grade, the Low Carbon has outstanding ductility and toughness. Since low carbon steel sheets or also referred to as Low Temperature Carbon Steel are soft, they are best used for low temperature applications.

On the other hand, Medium Carbon Steel has much better mechanical properties as compared to low carbon steel, due to the performance of heat treatment followed by quenching and tempering carried out. Frequently utilized in applications involving vessels, heat exchangers, oil and gas pipelines, as well as underground pipelines Killed Carbon or fully deoxidized steel sheets, have no oxygen content in them, thus eliminating room for corrosion.

Deoxidation of Fully Killed Carbon Steel coils is achieved by the addition of either silicon, aluminium, or other deoxidizing agents to the molten alloy. Black Carbon strips are produced from non-galvanized steel unlike regular carbon steels, which use galvanized steels to prevent corrosion.

 

A carbon steel grade is a module designed with superior content of carbon. Carbon Steel Plate is made with a carbon content spanning between 0.5 to 2.1 percent in weight. These plates showcase superior strength and have enhanced resistance and tolerances. A CS Plate is designed in thickness above 6mm and can extend up to 100mm or more. These plates are very rigid and provide optimum stability and support to different applications. Contrary to this, the 

Carbon Steel Sheet is produced in thicknesses below 6mm, but above 0.5mm. These components add an aesthetical outlook to different applications. These sheets are not desired in applications that require stability and strength. A Carbon Steel Strip is designed in thickness of 0.2mm to 0.5mm. These strips act as filler material in a wide spectrum of welding operations. The 1018 Steel Plate is the most common carbon steel grade that is produced via the cold rolling process. These plates are very versatile and showcase superior mechanical properties and hardness. A Cold Rolled Carbon Steel Sheet has higher strength and tolerance as compared to hot-rolled sheets. These components are processed at room temperatures and are very durable.

A High Carbon Steel Sheet Metal is designed with a carbon content of 0.55% and above. The metal grade exhibits superior strength and is resistant to wear due to its hardness. This metal is a preferred choice in cutting tools and machinery employed to bend metal. A Low Carbon Steel Sheet, on the contrary, has a carbon content of 0.05% to 0.3%. These sheets don’t possess the same hardness and strength as the high carbon sheets, but are very ductile and show enhanced formability. The Low Carbon Steel Plate is a viable solution in applications that require moderate strength and are lighter in weight. For any queries and questions about our products or the Carbon Steel Diamond Plate, contact us for more information.

 

Components such as plates, sheets, coils and strips produced in accordance with both the specifications are to undergo tension tests to determine their mechanical properties like tensile and yield strength along with Rockwell hardness and elongation. While ASTM A283 produced sheets envelopes four grades of structural quality carbon steel, the ASTM A516 CS sheets are designed with the intention of being used in pressure vessels that are welded. The four grades of the ASTM A516 sheets are particularly noted for their notch toughness.

 

Find a Carbon Steel Strip Stockist who is reliable and experienced. See Thickness Chart In Mm

 

 

We are a large supplier of CS Coil In India and abroad, As Dealer Low Carbon Steel Plates are available in widths ranging from 1250mm to 2500mm and thicknesses ranging from 3mm to 300mm, or as required by customers.

 

• ASTM A283 Grade B, A, C – Moreover most fundamental fabric in carbon basic.
• ASTM A537 – in fusion welded pressure vessels For heat treated carbon plate .
• ASTM A516 – For boiler, vessel plate.
• ASTM A36 plates – The most common standards of CS plate
• ASTM A737 – For boiler, pressure vessels plate of low alloy .
  
• ASTM A572 – Where with lower weight, mechanical strength of ASTM A572 plate is higher than A36.
• ASTM A573 – A kind of structural plate with carbon-manganese-silicon.

 

 

 

• High CS plates: Hard plate with a content of 0.55 percent to 1.0 percent.
• Medium CS plates: C content ranges from 0.25 to 0.55 percent.
• Low CS plates: plate has a carbon content of 0.06 percent to 0.25 percent and is also known as mild steel plate.
• The hardness of plates increases as the carbon content increases.

 

CS Plates come in a variety of shapes and sizes:

• Carbon Structural Steel Plates
• Boiler Steel Plates
• Tanks Steel Plates
• Carbon Shipbuilding Steel Plates

 

• ASTM A516
• ASTM A283 Grade A, B, C
• ASTM A36 plates
• ASTM A572
• ASTM A737
• ASTM A573
• ASTM A537

 

 

• construction industry
• pressure vessels
• marine and offshore equipment,
• military applications.

 

Compare our price with Carbon Steel Plate Manufacturer In India, High CS Sheet Metal is available with a variety of special finishes, including BA/No. 4 matte finish, No. 8 mirror finish,and PVC coating.

 

 

CS sheets, plates, and coils are bundled to avoid damage during transportation. Customary export packing is finished in wooden boxes or cases only in the case of exports. Trademark (Company's LOGO), Size,Grade, and Lot No. are all stamped on all CS sheets, plates, and coils. Custom labelling on our goods is available upon request.

 

 

As distributors keep a large stock of Cold Rolled Carbon Steel Sheet is commonly used in shipbuilding and offshore platforms, See Carbon Steel Plate Price

 

 

 

0.284 pounds per cubic inches

 

 

 

 

• Alternative to aluminium or SS that is less expensive.
• CS plates are extremely ductile.
• When compared to other sheets, it has a lot of versatility. plates can be found in a variety of thicknesses and widths.
• For corrosion resistance, it might be galvanised.
• It's malleable and simple to make.

 

• Width * Length * Thickness * Density = Weight
• 48″ * 96″ * .1875″ * 0.284 lb/in3 = 245 lb.