EN 10028-2 P355GH Steel Plate

 

highest demand EN10028-3 P355GH Material Supplier in India and worldwide available in standard and heavy thicknesses

EN 10028-2 P355GH Steel Plate

 

 

As Stocking Distributors Our distribution centers retain ready stock of the Steel Plate EN10028-2 P355GH in regular sizes, although more sizes may be available for special orders.

 

What is EN 10028-2 P355GH Steel Plate?

P355GH is a pressure vessel plate specified across the EN 10028 of the Euro Norm standard. The EN 10028-2 P355GH Steel Plate is designed with an excellent composition of chromium and molybdenum. The superior concentration of this content in the P355gh steel plate gives these modules enhanced corrosion and oxidation resistance within the system. The modules of the EN10028-2 P355GH grade have a specified elevated temperature range.

The high-strength items within the grade possess good impact strength. Designed with good mechanical properties, the EN10028 P355GH steel plate exhibit a minimum elongation of fracture of 21%. The normalized steel grade is utilized by fabricators for heat exchangers and pressure vessels. EN10028-3 P355GH Pressure Vessel Steel Plates can work efficiently in high temperatures and in stress-induced environments.

The EN 10028 grade was earlier known as BS 1501-161-360A and DIN H1 according to British Standards. P355GH has excellent anti-corrosive properties. BS en 10028-2 p355gh material is tough and hard because of the added content of chromium and molybdenum.  P355GH material can sustain in very high-temperature.  This is pressure vessel Steel grade which is used in fuel-burning boilers, steam boiler equipment, and to make pressure pipes and vessels. Triton Alloys Stock around 400-500 ton P355GH plates  in different thicknesses, Width and Length.

We are one of the largest stockist and supplier of EN 10028-2 P355GH material in India. We purchase this material directly from the manufacturers in Europe, Japan, South Korea, Germany, China and India. We are stocking distributors of many renowned Mills. We purchase only in large quantities and in cash so our purchase price is almost 15% lesser compared to their dealers and distributors.  Triton alloys stock and supply pressure vessel plates of Mills like thyssenkrupp, Dillinger, Nippon Sumitomo and JFE steel. We also purchase material from manufacturers of EN 10028-2 P355GH Steel Plates in India and China. These plates are more than 50% cheaper compared to renowned manufacturers in Japan and Europe. 

However P355GH Plates of Indian and Chinese manufacturers are also tested on elevated temperatures. If you want to go through the test reports or MTC, Call now ! We can mail you along with the Price List of P355GH material. We can also offer you the Price List of Indian Manufacturer and Dillinger Price List, so you can compare. We have a minimum of 2 supplies in a month to African countries, Middle East, South America, Singapore and Malaysia. In our Stock you can find standard sizes as well  hard to find sizes.

Triton Alloys not only supplies to end users but also supplies to Traders, Exporters, Importers, Local Suppliers and small stockholders. Contact us now ! if you want to associate with Triton Alloys as a distributor, Dealer or Sales Agent at your own location. We are here to give you a special and lowest price of EN 10028-2 P355GH Steel Plates.

EN 10028-2 P355GH Steel Plate

 

 

P355gh Material Specification

Equivalents

D52-1,2, Fe E355, A52 CP, 19Mn8, SS 21,06,01, Fe510-1-KW, SPV355

Heat Treatment AR,TMCP,N,Q+T
Width

Up to 3 metres wide

Thickness

6 – 150 mm

Length

Up to 12 metres long

Certification

Mill Test Reports Available as per EN 10204 3.1

 

En 10028-2 Equivalent Material

The En 10028-2 Equivalent Material DIN is 19Mn6, while the Japanese equivalent is SPV36 with the France equivalent of AFNOR A52CP. The British standards of this grade are BS 224Gr.490 with Italian UNI standards of Fe510-1KW.

 

P355GH Equivalent Grades in the United States of America

ASTM A414 Gr. G /  ASTM A516 Gr. 70 / ASTM A537 CL1

 

EN10028-3 P355GH steel number

1.0473

 

Equivalent Grades of P355GH in United Kingdom or England

BS 224 Gr.490

 

P355GH Equivalent Grades in Europe

  • Europe : EU / EN P355GH
  • Finland : SFS Fe52BP / Fe52DP
  • Belgium : D52 -1,2
  • Germany : DIN/ Wnr 19Mn8
  • France : AFNOR A52 CP
  • Italy : UNI Fe510-1-KW
  • Sweden: SS 2103
  • Spain : UNE A52RCI

 

Equivalent Grades of P355GH in Asia

Japan: JIS SPV355

 

We also supply and export a diverse selection of P355gh steel plate, view P355gh Equivalent Astm Material and P355gh Vs P355nh

 

Price of EN 10028-2 P355GH Pressure vessel steel plate

Description Price
Controlled Rolling Hot Rolled P355gh Boiler Steel Plate US $ 600-990 / Ton
Hot Rolled P355gh Boiler Pressure Vessel Steel Plate US $ 550-850 / Ton
P355gh Sev345 Boiler Steel Plate (CZ-S62) US $ 480-586 / Ton
Boiler and Pressure Vessel Steel Plate P355gh US $ 600-1000 / Ton
P355gh Hot Rolled Boiler and Pressure Vessel Steel Plate Price Per Ton US $ 520-640 / Ton
En 10028-2 P355gh Steel Plate US $ 700-800 / Ton
JIS G4053 Smn420/P355gh Alloy Structural Steel Plate US $ 800-1000 / Ton
High Strength P355gh 100mm Boiler Steel Plate  US $ 550-860 / Ton

 

P355gh Vs P355nh

P355gh and P355nh are two grades of pressure vessels that can be distinguished based on certain features.

  • P355gh is specified with elevated temperature properties in the EN 10028-2: 2009 grade flat products for use in specific pressure purpose standards. P355nh is a fine grain normalized weldable steel flats under the EN 10028-2: 2009 standard.
  • The P355gh grade has a slightly better chemical composition when compared to the P355nh.
  • The tensile strength of the P355gh grade is slightly higher than the P355nh module.

 

 

Basic Types of P355GH Steel Plate

En10028 Boiler Steel Plate P355gh
En10028 Boiler Steel Plate P355gh
Pressure Vessel Steel Plate P355gh 1.0473
Pressure Vessel Steel Plate P355gh 1.0473
P355gh Hot Rolled Alloy Steel Plate for Boiler
P355gh Hot Rolled Alloy Steel Plate for Boiler
Boiler and Vessel Steel Plate P355gh
Boiler and Vessel Steel Plate P355gh
P355gh Boiler and Pressure Vessel Steel Plates
P355gh Boiler and Pressure Vessel Steel Plates
P355gh Iron Boiler Steel Plate
P355gh Iron Boiler Steel Plate
En10028-2 P355gh Flat Steel Plate for Pressure Purposes
En10028-2 P355gh Flat Steel Plate for Pressure Purposess
En 10038 P355gh Alloy 0.2mm Pressure Vessel Steel Plate
En 10038 P355gh Alloy 0.2mm Pressure Vessel Steel Plate


Shortest delivery time in EN10028 P355GH steel plate, Must view P355gh Mechanical Properties, Thickness Chart In Mm, P355gh Vs S355j2

 

En 10028-2 Equivalent Astm

P355gh is a steel grade under the EN10028 grade. The En 10028-2 Equivalent Astm grade is the ASTM Grade 70 and the ASME SA516 Grade 70 that is superseded based on the DIN and British standards

 

P355gh Vs S355j2

  • P355gh grade is a high-temperature weldable pressure vessel grade that is employed in boiler and various petrochemical industries. 
  • S355j2 grade is low-manganese grade steel that is characterized by good strength and is seen in construction and machine industries.

 

Steel Plate EN10028-2 P355GH Chemical Composition

Element

% by mass

Element

% by mass

Manganese (Mn)

1.10 to 1.70

Phosphorous (P) (max)

0.025

Carbon (C)

0.10 to 0.22

Silicon (Si)

≤0.60

Nitrogen (N)

≤0.012

Chromium (Cr)

≤0.30

Sulphur (S) (max)

0.015

Aluminium (Al)

≤0.020

Niobium (Nb)

≤0.020

Nickel (Ni)

≤0.30

Copper (Cu)

≤0.30

Molybdenum (Mo)

≤0.08

Titanium (Ti) (max)

0.03

Vanadium (Vi)

≤0.02

 

P355gh Mechanical Properties

P355gh is designed with excellent mechanical properties. These modules exhibit a tensile strength between 510mpa to 650mpa. They show a minimum yield strength of 355mpa and can be easily elongated by a minimum of 21%.

Thickness Tensile Strength  Yield Strength Elongation
Up to 16  Millimeter ≥335 MPa 510-650 MPa 20 minimum 
16 Millimeter to 40 Millimeter
≥345 MPa
40 Millimeter to 60 Millimeter
≥335 MPa
60 Millimeter to 100 Millimeter ≥315 MPa 490-630 MPa
100 Millimeter to 150 Millimeter ≥295 MPa 480-630 MPa
150 Millimeter to 250 Millimeter ≥280 MPa 470-630 MPa

 

EN 10028-2 P335GH Sizes and Delivery Conditions

  • Thickness : 4 Millimetre-80 Millimeter
  • Width : 2000 Millimeter, 2200 Millimeter, 2500 Millimeter
  • Length: 8000 Millimeter to 12000 Millimeter
  • Delivery Types : Normal and Tempered, Quenched and Tempered

 

Most Common Types of EN 10028-2 P355GH Steel Plate

EN 10028-2 P355GH Steel Plate
EN 10028-2 P355GH Steel Plate
P355Gh Material
P355Gh Material
EN10028 P355GH Steel Plate
EN10028 P355GH Steel Plate
Steel Plate EN10028-2 P355GH
Steel Plate EN10028-2 P355GH
P355Gh Plate
P355Gh Plate
P355 Gh Steel Plate
P355 Gh Steel Plate

 

Always refer Material Properties and Specification before buy P355gh Material from India

 

P355gh Material Properties

P355gh is pressure vessel steel specified under EN10028. These components possess excellent yield strength along with other mechanical properties allowing these modules to hold load-bearing material in the system. The grade of steel is fully killed and is operational in different temperatures, corrosion, stress, etc.

 

EN 10028-2 P355GH Steel Plate Weight Chart

EN 10028-2 P355GH Steel Plate Weight Chart

 

P355gh plate Testing

  • Hardness Test
  • Mechanical Testing Such as Tensile of Area
  • Positive Material Identification – PMI Testing
  • Chemical Analysis – Spectro Analysis
  • Pitting Resistance Test
  • Micro and MacroTest
  • Flattening Test
  • Intergranular Corrosion (IGC) Test
  • Flaring Test

 

Inventory Size Range of P355gh Material

Width

Up to 3 metres wide

Thickness

6 – 150 mm

Length

Up to 12 metres long

 

P355GH Pressure vessel steel plate Documentation

  • Certificate of Origin legalized
  • Packing List including Complete Details
  • Commercial Invoice including HS Code
  • Heat Treatment Charts
  • Quality Assurance Plan (QAP)
  • Material Traceability Records
  • NABL approved Laboratory Test Reports
  • Guarantee Letter
  • Material Test Certificates (MTC)

 

EN10028P P355GH Plate Dimensions

CUT-TO-LENGTH PLATES FOUR-HIGH MILL PLATES
WIDTH1
from _ to
in mm
THICKNESS1
from _ to
in mm
WIDTH1
from _ to
in mm
THICKNESS1
from _ to
in mm
- -
- - 3,600 4.0 to 85.0
- - 3,600 4.0 to 40.02
- -
- -
3,600 4.0 to 85.0
3,600 4.0 to 85.0
3,600 4.0 to 85.0
- - 3,600 4.0 to 85.0
- -
- - 3,300 4.0 to 65.0
- -
- - 3,600 4.0 to 85.0
- - 3,300 4.0 to 85.0
3,300 4.0 to 50.0
- - 3,300 4.0 to 20.02
- -

 

P355GH Plate Tolerances chart

P355GH Plate Tolerances chart

 

Comparision of steel grades




  P355GH EN 10028-2 Number:1.0473
Comparision of steel grades
DIN 17155 19 Mn 6
NFA 36-205 A 52 CP
UNI 5869 Fe 510-1KW
BS 1501
-
UNE 36087 A 52 RCI
ASTM A 414 Gr. G
JIS G3115 SPV 36