• Gora Gandhi Palace, A-24, Gr. Floor, Khetwadi Back Road, Girgaon, Mumbai – 400004

+91(22)-66363383

info@tritonalloysinc.com

Mon - Sat 10 AM - 6 PM

IS 2062 Grade B Plate

  • Home
  • IS 2062 Grade B Plate

 

Check IS 2062 Grade B Vs Is 2062 E250, buy from MS IS 2062 Chequered Plates Supplier and Stockist in India at Dealer price

IS 2062 Grade B Plate

 

Table Of Content

 

Before you choose a supplier for your IS 2062 Grade B Plates order, keep these points in mind

  • One that is ISO 9001 certified, ensuring that steel plate items have been examined and validated to fulfil the required standards
  • Several distribution facilities spread across a large geographic area to assist cut freight costs.
  • A substantial stock of the grade your order demands to ensure that you can have the material you need quickly.
  • Promise To Respond Within 24 Hours (Usually In The Same Hour)

 

get custom size IS 2062 Plate with MTC, As We are 3rd largest Stocking Distributor and Exporter of Carbon Steel IS2062 Gr B Material in Mumbai

 

IS 2062 Grade B is a grade that comes under the Bureau of Indian Standards for steel. The IS 2062 Grade B Plate is an Indian-grade structural steel plate. These plates are designed with a superior chemical composition of carbon, manganese, sulfur, phosphorous, and silicon. The content embedded in the is 2062 gr b material gives them enhanced resistance against oxidative and corrosive media. The material helps in manufacturing a wide range of micro-alloyed sheets, plates, coils, and other sections used across different industries. The Is 2062 Gr B is the most common grade in this range. The components in this grade have enhanced ductility and showcase superior stability at elevated temperatures.

The Is 2062 Plate can be produced via a hot or cold rolling process. Designed possessing superior strength, the plates provide stability and support to different applications. Is 2062 Steel Plate has excellent mechanical properties. These plates have a minimum tensile strength of 410mpa with a minimum yield strength of 230mpa. They can be elongated by a minimum of 23% and have a minimum impact at 27J at 0 degrees C. The Hardness Of Is 2062 Plate ranges between 120HBW to 131HBW depending on the content of carbon in their respective composition. They have a thickness between 3mm to 16mm while exhibiting a thickness tolerance of 1.78mm. The Is 2062 Grade Steel Plate showcases superior strength and provides stability to different applications.

These plates are used in oil and gas systems, petrochemicals, chemical processing, pharmaceuticals, and various other industries. Is 2062 Ms Plate has a carbon content between 0.05% to 0.25% by weight, giving the plates superior ductility and good welding capability. The major differentiating factor in the Is 2062 Grade B Vs Is 2062 E250 grade is the presence of carbon equivalent in the E250 grade that is not present in the original grade. The Is 2062 Chequered Plate is an aesthetically appealing grade that is punched with different designs on its surface. For added information, get in touch across any of our outlets.

IS 2062 Grade B Plate

 

Mild Steel IS 2062 Plate Specification

  • Standard: EN 10025-2:2004
  • Thickness: 1.5mm-200mm
  • Length: 2-12m or as customers’ special requirements
  • Width: 900- 2000mm
  • Grade of hot rolled steel plates: S355JR, ASTM A36, SS400, A572, ST37, Q195, ST52, S235JR, Q235, S45C, Q215, S50C, Q345

 

IS 2062 Grade B Price In India

Description Per Unit (INR) Unit
44 Nos. 2000 Mm X 63000 Mm X 6mm Is2062 Grade B Plate 46 KGS
Is 2062 Grade B Plates/sheets 2000mm X 6300mm X 6mm 17 Nos 55 KGS
2000mm X 6300mm X 8mm Hot Rolled Non Alloy Steel Plate/sheet To Is 2062 Grade B (Duly Formed) 11 Nos 55 KGS
Size (M): 6.x2 Hot Rolled Non Alloy Steel Is 2062 Grade B Plate/sheet To Thick: 16, No.of : 1 49 KGS
Thick: 16, Size (M): 6.x1 Plate/sheet To Is 2062 Grade B No.of : 22 49 KGS
Is 2062 Grade B 2000 Mm X 6300 Mm X 8 Mm Plate 25 Nos 46 KGS

 

IS 2062 Grade B Plates Thickness

Is 2062 Grade B Plate Thickness| IS 2062 Plate Thickness Chart

IS 2062 Grade B Plate Thickness(MM) Width (MM) 1600 1800 2500 3000 2000 2800 3200 2200
10 6300 9300 12500
8 6300 9300 12500
12 6300 8000 12500 6300 9300 12500 7100 10000
16 5000 6300 8000 9000 12500 7100 9300 9000 9300 12500 5600 7100 8000 10000 5600 7100 9000 9300 12500
14 5600 6300 7100 9000 9300 12500 5000 5600 6300 7100 8000 9000 12500 9300
18 5600 7100 9300 5600 7100 8000 10000 5600 6300 7100 8000 9000 9300 12500 5000 6300 9000 9300 10000 5000 6300 8000 9000 12500
22 5000 5600 6300 7100 9000 9300 5000 5600 6300 8000 9000 12500 5600 6300 8000 9000 9300 5600 7100 8000 10000 5000 5600 7100 8000 9300 5000 6300 7100 9300 10000
20 5600 7100 9300 5000 5600 6300 7100 9000 9300 12500 5000 6300 9000 9300 10000 5000 5600 6300 8000 9000 12500 5600 8000 9000 9300 5600 7100 8000 10000
25 5000 5600 6300 8000 12500 5000 5600 7100 10000 5000 5600 7100 8000 6300 12500 5000 6300 9000 9300 10000 6300 7100 12500 5600 6300 12500 5600 6300 8000 9000 9300
32 5000 5600 9000 9300 10000 5000 6500 8000 9000 5600 6300 12500 5000 9000 9300 10000 5000 7100 8000 5000 5600 9300 10000 5000 8000 9000 10000 5000 6300 7100 12500
28 5000 5600 7100 10000 5000 6300 9000 9300 10000 6300 7100 12500 5600 6300 10000 12500 5600 8000 9000 9300 5600 6300 10000 12500 5000 5600 9300 10000 5000 5600 7100 8000
40 5000 7100 8000 6300 7100 12500 5000 9000 9300 10000 7100 8000 5600 6300 12500 7100 8000 9000 93000 10000 6300 7100 8000 5000 5600 10000
110 5000 5600 5000
36 5000 5600 8000 9000 5000 7100 8000 5000 5600 9300 10000 8000 9000 9300 6300 7100 12500 5000 8000 9000 9300 7100 8000 9000 5600 6300 12500
45 6300 7100 12500 5600 6300 12500 8000 9000 9300 6300 7100 5000 5600 10000 7100 8000 6300 7100 5000 9300 10000
56 5000 5600 9300 10000 5000 9300 10000 6300 7100 5000 5600 8000 9000 9300 5600 6300 5000 5600 7100 8000
100 5000 5600 6300 5000 5600 5000
50 5600 6300 12500 5000 6500 9300 10000 7100 8000 5600 6300 7100 5000 9000 9300 10000 6300 7100 5600 6300 8000 9000 9300
63 4500 5000 9000 9300 10000 8000 9300 5600 6300 4500 5000 7100 8000 5000 5600 4500 5000 6300 7100
80 6300 7100 8000 5600 6300 7100 4500 5000 5000 5600 6300 4500 5000 5600
75 7100 8000 6300 7100 4500 5000 4500 5600 6300 4500 5000 5000 5600
90 6300 5600 6300 5000 5600 5000
120 4500 5000

 

IS 2062 Grade B Vs IS 2062 E250

IS 2062 Grade B and IS 2062 E250 are structural steels that differ in one important way. Carbon equivalent is present in the IS 2062 E250 grade, although it is not included in the IS 2062 grade B modules.


 

Basic types of IS 2062 Steel Plate

Is 2062 Steel Plate
IS 2062 Steel Plates
Mild Steel IS 2062 GR.B Plate
Mild Steel IS 2062 GR.B Plates
IS 2062 Gr B High Tensile Plates
IS 2062 Gr B High Tensile Plates
IS 2062 Grade B Steel Plate
IS 2062 Grade B Steel Plates
IS 2062 Gr B Sheet
IS 2062 Gr B Sheet
IS 2062 gr. B Hot Rolled Plates
IS 2062 gr. B Hot Rolled Plates
GR.B IS 2062 MS Cold Rolled Plate
GR.B IS 2062 MS Cold Rolled Plates
IS 2062 Mild Steel Plate
IS 2062 Mild Steel Plates

Check out our inventory with price list and Structural Steel Is 2062 Gr B Chemical Composition/Mechanical Properties, Wholesaler and Exporter of IS 2062 Gr.B Sheet & Plate

 

IS 2062 Gr B Chemical Composition

Is 2062 Chemical Composition| IS 2062 Grade A Chemical Composition
Grade Si C Mn S P
IS 2062 Grade B Plate 0.4 0.22 1.5 0.045 0.045


Most Popular Types of IS 2062 Gr B Material

IS 2062 Plate
IS 2062 Plate
IS 2062 Grade B Plate
IS 2062 Grade B Plate
IS 2062 Chequered Plate
IS 2062 Chequered Plate
IS 2062 MS Plate
IS 2062 MS Plate
IS 2062 Grade Steel Plate
IS 2062 Grade Steel Plate
IS 2062 Gr B Material
IS 2062 Gr B Material

IS 2062 Ms Plates Weight Chart

Thickness weight
（mm） （kg/m²）
0.25 mm 1.96 kg/m²
0.2 mm 1.57 kg/m²
0.35 mm 2.75 kg/m²
0.3 mm 2.36 kg/m²
0.45 mm 3.53 kg/m²
0.4 mm 3.14 kg/m²
0.55 mm 4.32 kg/m²
0.5 mm 3.93 kg/m²
0.65 mm 5.1 kg/m²
0.6 mm 4.71 kg/m²
0.75 mm 5.89 kg/m²
0.7 mm 5.5 kg/m²
0.9 mm 7.07 kg/m²
0.8 mm 6.28 kg/m²
1.1 mm 8.64 kg/m²
1 mm 7.85 kg/m²
1.3 mm 10.21 kg/m²
1.2 mm 9.42 kg/m²
1.5 mm 11.78 kg/m²
1.4 mm 10.99 kg/m²
1.7 mm 13.35 kg/m²
1.6 mm 12.56 kg/m²
2 mm 15.7 kg/m²
1.8 mm 14.13 kg/m²
2.5 mm 19.36 kg/m²
2.2 mm 17.27 kg/m²
3 mm 23.55 kg/m²
2.8 mm 21.98 kg/m²
3.5 mm 27.48 kg/m²
3.2 mm 25.12 kg/m²
3.9 mm 30.62 kg/m²
3.8 mm 29.83 kg/m²
4.5 mm 35.33 kg/m²
4 mm 31.4 kg/m²
5.5 mm 43.18 kg/m²
5 mm 39.25 kg/m²
7 mm 54.95 kg/m²
6 mm 47.16 kg/m²
9 mm 70.65 kg/m²
8 mm 62.8 kg/m²
11 mm 86.35 kg/m²
10 mm 78.6 kg/m²
13 mm 102.1 kg/m²
12 mm 94.2 kg/m²
15 mm 117.75 kg/m²
14 mm 109.9 kg/m²
18 mm 141.3 kg/m²
16 mm 125.6 kg/m²
22 mm 172.7 kg/m²
20 mm 157 kg/m²
25 mm 196.25 kg/m²
24 mm 188.4 kg/m²
28 mm 219.8 kg/m²
26 mm 204.1 kg/m²
32 mm 251.2 kg/m²
30 mm 235.5 kg/m²
35 mm 274.75 kg/m²
34 mm 266.9 kg/m²
38 mm 298.3 kg/m²
36 mm 282.6 kg/m²
42 mm 329.7 kg/m²
40 mm 314 kg/m²
45 mm 353.25 kg/m²
44 mm 345.4 kg/m²
48 mm 376.8 kg/m²
58 mm 455.3 kg/m²
46 mm 361.1 kg/m²
52 mm 408.2 kg/m²
50 392.5 kg/m²
55 431.75 kg/m²
54 423.9 kg/m²
56 439.6 kg/m²

 

Temperature Range of IS 2062 Hot Rolled Plates

Temperature Range 650 to 720 degree

 

IS 2062 Standard Plates Size

Width & Length of Gauge per Sq. Ft. Weight Weight per Sheet
10 (.135″) x 48.0 x 120.0 mm 5.670 226.8
11 (.120.0″) x 48.0 x 96.0 mm 5.040 161.3
11 (.120.0″) x 36.0 x 120.0 mm 5.040 151.2
7 (.1874″) x 48.0 x 120.0 mm 7.871 314.8
11 (.120.0″) x 48.0 x 144 mm 5.040 241.9
11 (.120.0″) x 48.0 x 120.0 mm 5.040 201.6
12 (.105″) x 36.0 x 120.0 mm 4.410 132.3
11 (.120.0″) x 60 x 96.0 mm 5.040 252.0
12 (.105″) x 60 x 120.0 mm 4.410 220.5
14 (.075″) x 48.0 x 120.0 mm 3.150 126.0
14 (.075″) x 36.0 x 120.0 mm 3.150 94.50
16 (.060″) x 48.0 x 96.0 mm 2.520 80.64
12 (.105″) x 48.0 x 120.0 mm 4.410 176.4
16 (.060″) x 36.0 x 120.0 mm 2.520 75.60
16 (.060″) x 60 x 120.0 mm 2.520 126.0
18 (.048.0″) x 48.0 x 120.0 mm 2.016 80.64
18 (.048.0″) x 36.0 x 120.0 mm 2.016 60.48.0
16 (.060″) x 48.0 x 120.0 mm 2.520 100.8
20 (.036.0″) x 36.0 x 120.0 mm 1.512 45.36.0
20 (.036.0″) x 48.0 x 120.0 mm 1.512 60.48.0
22 (.030″) x 36.0 x 120.0 mm 1.260 37.80
22 (.030″) x 48.0 x 120.0 mm 1.260 50.40
28 (.015″) x 36.0 x 120.0 mm .6300 18.90
22 (.030″) x 48.0 x 96.0 mm 1.260 40.32
24 (.024″) x 36.0 x 120.0 mm 1.008 30.24
24 (.024″) x 48.0 x 120.0 mm 1.008 40.32
26 (.018″) x 36.0 x 120.0 mm .7560 22.68
26 (.018″) x 48.0 x 120.0 mm .7560 30.24

 

IS 2062 Grade B Vs A

  IS 2062 Grade A IS 2062 Grade B
Impact Test At Room Temp At 0 Degree
Carbon Percentage 0.23 0.22
Weldability High Low as Compared to A

 

HS Code of IS 2062 Gr B Plates

HS Code Description
72085210 IS 2062 Grade B 2000 Mm X 6300 Mm X 8 Mm Plate s25 Nos
72085210 IS 2062 Grade B Plates/sheets 2000mm X 6300mm X 6mm 17 Nos
72085210 44 Nos. 2000 Mm X 63000 Mm X 6mm Is2062 Grade B Plates
72085210 Size (M): 6.x2 Hot Rolled Non Alloy Steel Is 2062 Grade B Plates/sheets To Thick: 16, No.of : 1
72085210 2000mm X 6300mm X 8mm Hot Rolled Non Alloy Steel Plates/sheets To Is 2062 Grade B (Duly Formed) 11 Nos
72085210 Thick: 16, Size (M): 6.x1 Plates/sheets To Is 2062 Grade B No.of : 22

 

Hardness Of IS 2062 Plate

Low or Mild IS 2062 carbon plates have a hardness ranging from 120HBW to 131HBW, depending on the amount of carbon in its composition.

 

Near By Areas Where We Have Supplied IS 2062 Grade B Plate

Valero Industries, USA

Mild Steel IS 2062 GR.B Plates
Valero Industries, USA

Bg Group Limited, UK
IS 2062 Grade b Hot Rolled Mild Steel Plates
Bg Group Limited, UK
BP Sinopec Marine Fuels, Singapore
IS 2062 Gr B Mild Steel Cr Plates
BP Sinopec Marine Fuels, Singapore
Pexco Exploration, Malaysia
IS 2062 Grade B Carbon Steel Sheet
Pexco Exploration, Malaysia
We Keep Bulk Stock of Steel IS 2062 Hot Rolled Plate, get Cut to size High Tensile Steel IS 2062 GR.B Sheet ,See Plate Thickness Tolerance/ specification

 

IS 2062 MS Plate Documentation

IS 2062 MS Plate Documentation
  • Certificate of Origin legalized
  • Packing List including Complete Details
  • Commercial Invoice including HS Code
  • Heat Treatment Charts
  • Quality Assurance Plan (QAP)
  • Material Traceability Records
  • NABL approved Laboratory Test Reports
  • Guarantee Letter
  • Material Test Certificates (MTC)

 

Mild Steel IS 2062 Grade B Density


Density		 7.85 g/cm3

 

Material Testing of IS 2062 Grade Steel Plate

    Material Testing of IS 2062 Grade Steel Plate
  • Hardness Test
  • Mechanical Testing Such as Tensile of Area
  • Positive Material Identification – PMI Testing
  • Chemical Analysis – Spectro Analysis
  • Pitting Resistance Test
  • Micro and MacroTest
  • Flattening Test
  • Intergranular Corrosion (IGC) Test
  • Flaring Test

 

Plate Thickness Tolerance As Per IS 2062


Width (w), in. [mm]
Specified Thickness (t), in. [mm] w ≤ 84 [2134] 84 [2134] < w ≤ 120 [3048]   120 [3048] < w ≤ 144 [3658]
Tolerance Over Specified Thickness, *** in. [mm]
3/16 [4.76] ≤ t < 3/8 [9.52] -- 0.050 [1.27] 0.045 [1.14] 0.085 [2.16]
t < 3/16 [4.76] -- 0.070 [1.78] 0.055 [1.35] --
3/4 [19.05] ≤ t < 1 [25.04] 0.100 [2.54] 0.065 [1.65] 0.060 [1.52] 0.085 [2.16]
3/8 [9.52] ≤ t < 3/4 [19.05] 0.090 [2.29] 0.060 [1.52] 0.055 [1.40] 0.085 [2.16]
8 [203.2] ≤ t < 10 [254.0] 0.550 [14.0] 0.335 [8.50] 0.315 [8.00] 0.435 [11.0]
2 [ 50.80] ≤ t < 3 [76.20] 0.200 [5.08] 0.150[3.80] 0.125 [3.20] 0.175 [4.45]
1 [25.40] ≤ t < 2 [50.80] 0.115 [2.92] 0.075 [1.90] 0.070 [1.78] 0.095[2.41]
4 [101.6] ≤ t < 6 [152.4] 0.355 [9.02] 0.200 [5.08] 0.180 [4.75] 0.335 [8.50]
3 [76.20] ≤ t < 4 [101.6] 0.225 [5.72] 0.160 [4.06] 0.150 [3.81] 0.200 [5.08]
6 [152.4] ≤ t < 8 [203.2] 0.435 [11.0] 0.255 [6.48] 0.235 [6.00] 0.355 [9.02]

 

Specified Thickness (t), in. [mm] Flatness Tolerance for Thicknesses Given, in. [mm]
1/4 [6.35] ≤ t < 3/8 [9.52] 3/8 [9.5]
t ≥ 4 [101.60] 1/4 [6.4]
t < 1/4 [6.35] 7/16 [11]
1/2 [12.70] ≤ t < 3/4 [19.05] 5/16 [7.9]
3/8 [9.52] ≤ t < 1/2 [12.70] 5/16 [7.9]
1 [25.40] ≤ t < 1 1/2 [38.10] 1/4 [6.4]
3/4 [19.05] ≤ t < 1 [25.40] 5/16 [7.9]
1 1/2 [38.10] ≤ t < 4 [101.60] 1/4 [6.4]


MS IS 2062 Gr.B Plates Yield Strength

Standards Chemical composition (maximum) Mechanical Properties
P % Mn % C % S % % Elongation
guage
length
5.65 So		 Tensile
Strength
Min. Mpa		 Nb+V+T Yield
Strength
Min. Mpa
IS-2062 Gr B (SK) 0.045 1.5 0.20 0.045 23 410 . 240
SAIL-MA 300 0.055 1.5 0.25 0.055 20 440-560 Maximum
for all		 300
SAIL-MA 300 HI 0.040 1.5 0.20 0.040 21 440-560 300
SAIL-MA 350 0.040 1.5 0.25 0.040 20 490-610 350
IS-2062 Gr A (SK) 0.050 1.5 0.23 0.050 23 410 0.20 240
SAIL-MA 410 0.040 1.5 0.25 0.040 20 540-660 . 410
SAIL-MA 350 HI 0.040 1.5 0.20 0.040 19 540-660 . 410


Application of IS 2062 Steel Plates

  • Paper & Pulp Industry
  • General Purpose Applications
  • Chemical Processing and Food Processing Plants
  • Water Supply Systems
  • Fabrication Industry

 

IS 2026 High Tensile Structural Mild Steel Plates welding material

Steel Type
Welding Process
Min temp C
Thickness of thk part ,mm
Mild and medium tensile steel
MMA with low hydrogen electrode, Submerged arc, Gas metal arc, Cored wire
None
10
66
107
Upto 19
20-38
39-64
Over 64
Mild Steel
MMA with electrodes other than low hydrogen type
None
66
107
150
Upto 19
20-38
39-64
Over 64

 

IS 2062 Gr B Allowable Stress

  • Tensile Stress / Factor of Safety = Allowable Stress.
  • IS 2062 is a superior grade than IS 226 for carbon structural steel (CS or MS).
  • As a result, the safety factor or permitted stress will vary depending on the intended use.
  • Allowable stress is determined by the user, and only a few codes provide it.
  • The design stress utilised in the calculations is known as Allowable Stress.

 

Find Mild Steel IS 2062 GR B Plate with customized sizes online, check Properties, size, weight chart

 

Stocking Distributors of IS 2062 Grade B Plate of below Reliable Manufacturer

Nippon Steel IS 2062 Gr B Material
Nippon Steel IS 2062 Gr B Material
JFE Is 2062 Ms Plate
JFE IS 2062 Ms Plates
Gruppo Lucefin Is 2062 Grade Steel Plate
Gruppo Lucefin IS 2062 Grade Steel Plates
Arcelor Mittal IS 2062 Grade B Plate
Arcelor Mittal IS 2062 Grade B Plates
SAIL IS 2062 Hot Rolled Plate
SAIL IS 2062 Hot Rolled Plates
Essar IS 2062 Plate
Essar IS 2062 Plates
Jindal Mild Steel IS 2062 GR.B Plates
Jindal Mild Steel IS 2062 GR.B Plates
Thyssenkrupp Carbon Steel IS2062 GR.B Sheet
Thyssenkrupp Carbon Steel IS2062 GR.B Sheet

 

Packaging of IS 2062 Chequered Plate

Packaging of IS 2062 Chequered Plate

We pack our goods in numerous ways based on the products.such as,

  • Carton boxes
  • Shrink-wrapped
  • Wooden crates
  • Wooden boxes
  • Wooden pallets

 

 

What is IS 2062 Gr.b Tin Plates ?

Specification : IS: 1993 in Standard/Seconds or TIN SAIL.
Code Nominal coating wt in gm/m2 Total both surface Nominal coating wt in gm/m2 Per surface Min average coating mass in gm/m2
E2.8/2.8 5.6 2.8 4.9

 

Oil can
0.28 x 895/905/935 x 710 - Body size for cashew nut containers
0.28 x 895/905/935 x 660 - Body size for edible oil
0.28 x 765 x 510 - End size
Temper : CA (57)
Temper and Hardness
Hardness : 57 , +/-4 HR(30T)

 

IS 2062 Grade B Properties

IS 2062 Type B is a highly ductile mild steel grade that may be easily cut and then welded in position. The yield strength of these modules is 250 MPa, while the tensile strength is 410 MPa. They can be readily extended by 23 percent and have a minimum impact strength of 27J at 0 degrees C.

  • great ductility
  • high durability
  • stability in the elevated temperatures.
  • Corrosion resistance ability

 

IS 2062 Plate For Sale

MS GR.B IS 2062 Plates Mild Steel IS 2062 GR.B Plates
IS 2062 GR.B #4 Finish Mild Steel Plates GR.B IS 2062 Mild Steel Plate 2B Finish
IS 2062 GR.B High Quality MS Plates Mild Steel IS 2062 Plates
Mild Steel IS 2062 Cold Rolled Plates IS 2062 GR.B Mild Steel Plates
IS 2062 MS Plates Mild Steel IS 2062 GR.B Chequered Plates
Mild Steel IS 2062 GR.B Hot Rolled Plates Cut to Size Mild Steel IS 2062 GR.B Plates
IS 2062 GR.B MS Plates MS IS 2062 Cold Drown Plates
Mild Steel IS 2062 Plates IS 2062 GR.B MS Plates
Mild Steel GR.B IS 2062 HR Plates Mild Steel IS 2062 CR Plates

 

IS 2062 Grade B Equivalent Astm Material

Grade BS4360 EN10025(90) NFA 35-501 DIN 17100 EN10025(93)
IS2062 GR.B 43 C Fe 430C E28-3 St 44-3U S275J0

 

Mild Steel IS 2062 Grade B Mechanical Properties

Grade Yield strength Tensile strength Elongational (%) IMPACT
＜20mm 20mm-40mm ＞40mm
IS 2062 GR B 250 240 230 410 23 27J at 0 ° C

As Supplier and Stockist We Keep Stock of IS 2062 Gr B Material , Buy Online and Save Cost

Contact Now