Table Of Content
cut to size JFE EverHard 360 Steel Plates Suppliers at the best price in India
JFE-EH 360 is a standard abrasion-resistant steel grade. A JFE-EH 360 Plate is designed via a superior composition of silicon, manganese, phosphorous, sulfur, chromium, and carbon alongside additions of boron and titanium. The JFE EverHard 360 Steel Plates don’t have outstanding strength, but they have superior wear and tear-resistant in different stress-induced systems. These plates have a high content of carbon and are resistant to cracks during the welding process. Eh 360 Steel Plate is designed with thickness above 6mm and possesses enhanced hardness in the system. The versatile grade of plates are designed with a minimum hardness of 361 Brinell.
The extraordinary hardness allows the plates to be commonly seen in buckets, dump trucks, crushers, chutes, conveyors, bulldozers, excavators, etc. The JFE Everhard 360 Sheet, on the contrary, is designed in thickness below 6mm and above 0.5mm. These sheets don’t usually provide support and stability in the system, but they add an aesthetical appeal to different applications. Most of these components have a width between 500mm to 3000mm and can be available in lengths up to 12,000mm.
The 360 JFE EverHard Plate is 3-6 times more resistant to abrasion when compared to steel components. The lightweight plate has enhanced tolerances and provides environmental protection due to the Everhard grade. The Hot Rolled JFE EH 360 Wear Plates are produced as they are processed at elevated temperatures. At these temperatures, wear-resistant plates reach their recrystallization value, where they can be shaped in a wide range of configurations. These plates work well across low-temperature cryogenic systems and have a long service life. The plates are quality assured and can be customized in an array of dimensions to meet different product requirements. For any more queries, visit any of our outlets or contact us for more information.
Because of our facilities, we can stock the widest range of Eh 360 Steel Plate as a stockist; check Hardness and Specifications.
Material | JFE EH 360 |
Thickness | 6mm - 50mm |
Surface Paint | PE, EP, SMP, HDP, PVDF |
Width | 500 to 3000mm |
Length | 1,0000 to 12000mm |
Heat Treatment | Q+T, N |
Description | Price |
JFE EH 360 Wear Plates |
US $599-619 / Ton |
Jfe-eh360 plate | US $699-719 / Ton |
360 JFE EverHard Plate |
US $639-700 / Ton |
Hot Rolled JFE EH 360 Steel Plate |
US $699-719 / Ton |
JFE Everhard 360 Sheet Plate |
US $599-619 / Ton |
JFE-EH360 Wear-resistant steel plate | US $639-700 / Ton |
JFE EH 360 Steel Plates |
US $699-719 / Ton |
Eh360 Plate | US $599-619 / Ton |
JFE EH 360 Abrasion Resistant Steel Plates | US $639-700 / Ton |
Brand name | Type | Thickness(mm) | Brinell surface hardness [guaranteed] |
Charpy impact properties | |
---|---|---|---|---|---|
Charpy absorbed energy(J) [guaranteed] |
Test temperature (℃) |
||||
EVERHARD-C450LE | High Toughness Series | 5〜50.8 | 450±25 | ≧27 | -40 |
EVERHARD-C400LE | 5〜60 | 400±30 | ≧27 | -40 | |
EVERHARD-C500LE | 5〜50.8 | 500±40 | ≧27 | -40 | |
EVERHARD-SP | Super Grade | 5〜65 | ≧401 | ーーー | ーーー |
EVERHARD-C500 | Standard Series |
5〜101.6 | 500±40 | ーーー | ーーー |
EVERHARD-C400 | 5〜101.6 | 400±30 | |||
EVERHARD-C550 | 5〜32 | 550±40 | |||
EVERHARD-C340 | 38〜160 | 340±30 | |||
EVERHARD-C450 | 5〜101.6 | 450±25 |
Width (mm) | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
2201 ~2400 |
1801 ~2000 |
1501 ~ 1800 |
2601 ~ 2800 |
2401 ~2600 |
2001 ~2200 |
3001 ~ 3200 |
2801 ~ 3000 |
3401 ~3600 |
3201 ~3400 |
||
T h i c k n e s s (mm) |
9.0~9.9 | 12 | 16 | 18 | 10 | 12 | 14 | - | - | - | - |
10.0~11.9 | 16 | 20 | 22 | 14 | 14 | 18 | - | 12 | - | - | |
12.0~12.9 | 16 | 20 | 22 | 14 | 14 | 18 | - | 12 | - | - | |
13.0~13.9 | 16 | 20 | 22 | 14 | 14 | 18 | - | 12 | - | - | |
14.0~22.0 | 16 | 20 | 22 | 14 | 14 | 18 | - | 12 | - | - | |
22.1~24.0 | 20 | 22 | 24 | 16 | 18 | 22 | 12 | 14 | - | - | |
24.1~26.0 | 22 | 24 | 25 | 18 | 20 | 22 | 14 | 16 | - | 12 | |
26.1~28.0 | 24 | 25 | 25 | 22 | 22 | 24 | 18 | 20 | 14 | 16 | |
28.1~30.0 | 25 | 25 | 25 | 24 | 25 | 25 | 20 | 22 | 18 | 20 | |
30.1~35.0 | 25 | 25 | 25 | 25 | 25 | 25 | 22 | 24 | 22 | 22 | |
35.1~40.0 | 25 | 25 | 25 | 25 | 25 | 25 | 24 | 25 | 22 | 22 | |
40.1~45.0 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 23 | 24 | |
45.1~50.8 | 25 | 25 | 25 | 25 | 25 | 25 | 23 | 25 | 20 | 22 | |
50.9~60.0 | 21 | 23 | 25 | 22 | 24 | 23 | 19 | 20 | 17 | 18 | |
60.1~70.0 | 18 | 19 | 22 | 19 | 20 | 20 | 16 | 17 | 14 | 15 | |
70.1~80.0 | 16 | 17 | 19 | 16 | 18 | 17 | 14 | 15 | 13 | 13 | |
80.1~90.0 | 14 | 15 | 17 | 14 | 16 | 15 | 13 | 13 | 11 | 12 | |
90.1~100.0 | 12 | 13 | 15 | 13 | 14 | 14 | 11 | 12 | 10 | 10 |
check out the benefits and drawbacks and request a quote today, If you're looking for a stocking distributor of Hot Rolled JFE EH 360 Wear Plates

JFE-EH 360 Plate

EH 360 Steel Plate

JFE Everhard 360 Steel Plates

Hot Rolled JFE EH 360 Wear Plates

JFE Everhard 360 Sheet

JFE-EH360 Wear Plate
Grade | Shielded metal arc welding*1 (°C) | Thickness mm | Gas shielded arc welding*2 (°C) |
100 | 32 | 25 | |
75 | 20 | 25 | |
100 | 30 | 50 | |
JFE-EH-SP | 175 | 35 | 175 |
200 | 51 | 200 | |
JFE-EH500LE | 125 | 19 | 75 |
175 | 32 | 125 | |
JFE-EH360A | 100 | 20 | 75 |
150 | 40 | 125 | |
Strength grade of materials | Shield metal arc welding | Gas shielded arc welding | ||
AWS grade | Bland* | AWS grade | Bland* | |
780N/mm2 | E11016-G E11016-G | LB-116 LB-80UL | ER110S-G | MGS-80(Ar+ CO2) |
490N/mm2 | E7016 E7016-G E7016 E7016 | KS-76 KSA-76 LB-52 LB-52UL | ER70S-G ER70S-G ER70S-G ER70S-G | KC-50(CO2) KM-50(Ar+ CO2) MG-50(CO2) MGS-50(Ar+ CO2) |
Type | Conventional standards |
EVERHARD C Series | ||||
Brand name | Brinell hardness | Thickness (mm) | Brand name | Brinell hardness | Thickness (mm) | |
High Toughness series | EVERHARD-400LE | 450±40 | 6(5) – 50.8 | EVERHARD-C450LE | 450±25 410 – 475 |
5 – 50.8 50.9 – 80.0 |
EVERHARD-360LE | 400+40 −39 |
6(5) – 60 | EVERHARD-C400LE | 400±30 | 5 – 101.6 | |
EVERHARD-500LE | 500+56 −23 |
6(5) – 32 | EVERHARD-C500LE | 500±40 450 – 540 |
5 – 50.8 50.9 – 80.0 |
|
Standard series | — | — | — | EVERHARD-C340 | 340±30 | 38 – 160 |
EVERHARD-360A | 361min. | 6 – 101.6 | EVERHARD-C400 | 400±30 | 5 – 101.6 | |
EVERHARD-360 | 6(5) – 50.8 | |||||
EVERHARD-400 | 401min. | 6(5) – 50.8 | EVERHARD-C450 | 450±25 | 5 – 101.6 | |
EVERHARD-500A | 477min. | 6 – 101.6 | EVERHARD-C500 | 500±40 | 5 – 101.6 | |
EVERHARD-500 | 6(5) – 50.8 | |||||
— | — | — | EVERHARD-C550 | 550±40 | 6 – 32 | |
EVERHARD-C600 | 600±40 | 6 – 25.4 |
- Positive Material Identification – PMI Testing
- Hardness Test
- Mechanical Testing Such as Tensile of Area
- Chemical Analysis – Spectro Analysis
- Micro and MacroTest
- Flattening Test
- Pitting Resistance Test
Grade | Hardness test* | Charpy impact test | |||
---|---|---|---|---|---|
Brinell hardness(3000) (Average of 5 value) |
Thickness(mm) | Test temperature (℃) |
Thickness (mm) |
J (Average of 3 specimens)Impact value |
|
JFE-EH400 | 401min | 6~50 | - | - | - |
JFE-EH360 | 361min | 6~50 | - | - | - |
JFE-EH500A | 477min | 6~100 | 0 | 13.1~25.0 | 21min |
JFE-EH360A | 361min | 6~100 | 0 | 13.1~50.0 | 21min |
JFE-EH500 | 477min | 6~50 | - | - | - |
Grade | Heat treatment | Available thickness (mm) |
Chemical Composition(%)* | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Si | C | Mn | S | P | Cr | V | Mo | B | Ti | Ceq** | |||
JFE-EH360 | Controlled Heat treatment |
6~50 | 0.55 max |
0.20 max |
1.60 max |
0.030 max |
0.030 max |
0.40 max |
- | - | 0.004 max |
0.005~0.020 | - |
JFE-EH400 | 0.25 max |
0.80 max |
|||||||||||
JFE-EH500 | 0.35 max |
0.80 max |
|||||||||||
JFE-EH360A | Controlled Heat treatment |
6~100 | 0.55 max |
0.20 max |
1.60 max |
0.030 max |
0.030 max |
0.40~1.20 | 0.10 max |
0.10~0.50 | 0.004 max |
0.020 max |
- |
Triton performs hydrostatic, hardness, flattening, and other testing on JFE Everhard 360 Sheet Plate Before the plates are supplied. look at the features
- Stone or iron chutes
- Construction of bridges
- Lifting and mobile equipment
- Framework structures
- Truck frames
- Crane booms
- Machine building
- Wearing plates
- Rail cars
- Pylons and other architectural structures
Our trained sales engineers can assist you in determining the best solution for your requirements of Jfe-Eh360 Wear Steel Plate can be shipped to any destination. Examine the Properties
Brand | Manufacture/Co | HARDNESS RANGE | C.E.V. Typical Values |
Values for HARDOX 500 | Thk: 10 – 20 | ||
JFE EVERHARD 360 | JFE STEEL CORPN. | 360-430 | 0.38 |
|
|