Supplier of S-TEN 1 Sulfuric Acid Dew Resistant Steel Plate in India at best price
Table Of Content
Industrial processing and flue-treatment systems at low temperatures have become a major hurdle. The S-TEN Plate resists the formation of corrosion induced by sulfuric acid in this reducing media. These plates have excellent strength and don’t easily dissociate under any pressure. A s ten plate or the Sulfuric Acid and Hydrochloric Acid Dew-Point Corrosion-resistant steel plates can be produced in hot or cold rolling processes. These plates have good stability and torsion across different stress-induced setups.
The S-TEN Steel Plate has outstanding workability and can be welded in place easily. These plates offer an economical option over stainless steel components. The Sulfuric Acid Dew Resistant Steel Plate is a common feature in low-temperature flue gas treatment equipment. These plates are a feature in automobile industries, coal-fired boilers, fabrication, pumps, machine building, oil and gas systems, etc.
One of the best applications of these components is in the field of thermal power generation and waste incineration plants. The versatile grade of products can be custom designed in different shapes and sizes as per your project requirements.
The S-Ten plate is designed in two grades, with the S-TEN 1 Plates being highly resistant to hydrochloric acid dew point corrosion as well as sulfuric acid dew point corrosion. In contrast, the S-TEN 2 Plate only shows resistance against sulfuric acid dew point corrosion in the system.
All our products are put through vigorous testing and screening procedures to eliminate any flaws in them. For any queries or questions with regards to our products or their pricing, contact us or visit any of our outlets for more information.
view STEN1 vs STEN2 Plate, Stocking Distributor of S-TEN Steel Plate to the global buyers at competitive rates.
Brand | nippon steel |
Thickness | 1mm to 50mm |
Material Grade | STEN 1 and STEN 2 corrosion resistant steel |
Color | black |
Usage/Application | electrostatic precipitators, air preheaters, sulfuric acid tank and flue-gas desulfurizers a |
Type | corrosion resistant steel |
Weight | density 7.85 |
Finishing | hot and cold rolled |
we provide all essential documents to the buyers, Always a reliable and trustworthy Stockist of Sulfuric Acid Dew Resistant Steel S-TEN Plates, check Corrosion rate
Grade | Corrosion rate (mg/cm2/hrs) | Testing conditions | ||
---|---|---|---|---|
pH3 | pH2 | pH4 | ||
Mild Steel | 2.5 | 8.2 | 0.36 | speed of specimen and solution: 1.8 m/sec Test temperature: 30℃ Test time: 72 hrs |
S-TEN 2 Plate | 2.2 | 2.8 | 0.38 | |
S-TEN 1 Plate | 2.0 | 1.6 | 0.36 |
view S Ten Plates Feature, one of the prominent Exporter of Sulfuric Acid and Hydrochloric Acid Dew-Point Corrosion-Resistant Steel Plates in india
S-TEN Plate Equipment | examples of Practical application | |||
---|---|---|---|---|
Grade | thickness of plate (mm) Approximate | S-TEN Plate Application | ||
S-TEN 2 Plate | S-TEN 1 Plate | |||
Dry-type electrostatic precipitator | ○ | ○ | 1.02~8 | duct, Casing, collecting electrode |
Air preheater |
○ | ○ | 0.06~6 | Ljungströmtype basket case, element |
- | ○ | 0.06~3.05 | Tube | |
Wet-type electrostatic precipitator | ○ | ○ | 3.02~12 | duct, Casing, collecting electrode |
Flue-gas desulfurizer | ○ | ○ | 3.02~6 | Flue-gas cylinder, after-burner duct |
Gas cooler | ○ | ○ | 4.05~9 | Casing, duct |
○ | - | 12~20 | Ash discharge blade | |
Stack | - | ○ | 6~12 | Internal cylinder |
Flue | ○ | ○ | 4.05~9 | Duct, expansion |
Hydrochloric acid pickling tank | - | ○ | 9~20 | Tank |
S-TEN Cold-rolled Sheets
Grade |
Yield point |
S-TEN Steel Plate Thickness |
Elongation |
Tensile strength |
Test specimen |
S-TEN 1 Plate |
235≦ |
— |
23≦ |
400≦ |
No. 5 |
S-TEN 2 Plate |
325≦ |
— |
22≦ |
440≦ |
No. 5 1 ) |
S-TEN Hot-rolled Sheets and Plate
Grade |
Test specimen |
Yield point |
Thickness |
Tensile strength |
Elongation |
S-TEN 1 Plate |
No. 5 |
245≦ |
≦ 5 |
400~510 |
23≦ |
No. 5 |
≦ 16 |
23≦ |
|||
No. 1A 1 ) |
18≦ |
||||
No. 5 |
235≦ |
≦ 20.2 |
23≦ |
||
No. 1A 1 ) |
22≦ |
||||
S-TEN 2 Plate |
No. 5 |
325≦ |
≦ 5 |
490~610 |
22≦ |
No. 5 |
≦ 16 |
22≦ |
|||
No. 1A 1 ) |
17≦ |
||||
No. 5 |
315≦ |
≦ 25.4 |
22≦ |
||
No. 1A 1 ) |
21≦ |
S-TEN2 Chemical composition |
|||||
Grade |
The Element Max (%) |
||||
S-TEN2 Plate |
S |
Si |
C |
Mn |
P |
0.035 |
0.15-0.55 |
0.14 |
0.90 |
0.035 |
|
|
Cu |
Cr |
Ti |
|
|
|
0.25-0.50 |
0.5-1.0 |
0.15 |
|
Grade |
Young’s modulus (GPa) |
Temperture (˚C) |
Thermal conductivity |
Specific heat (kJ/kg・K) |
Thermal expansion coefficient 20̊C~T (×10-6/˚C) |
S-TEN 1 |
207.4 |
25 |
44.2 |
0.450 |
— |
203.7 |
100 |
— |
— |
12.8 |
|
198.3 |
200 |
45.5 |
0.491 |
13.2 |
|
192.0 |
300 |
— |
— |
13.6 |
|
184.0 |
400 |
36.8 |
0.532 |
14.0 |
|
— |
500 |
— |
— |
— |
|
S-TEN 2 |
211.0 |
25 |
45.1 |
0.456 |
— |
207.0 |
100 |
41.2 |
0.486 |
12.8 |
|
202.0 |
200 |
40.8 |
0.520 |
13.1 |
|
196.0 |
300 |
40.2 |
0.553 |
13.5 |
|
188.0 |
400 |
37.7 |
0.590 |
13.8 |
|
179.0 |
500 |
34.1 |
0.644 |
14.2 |
for use in field of waste incineration plants and thermal power generation Well-known Dealer of S-TEN Plate

S-TEN Plate

S-TEN 1 Plates

S-TEN 2 Plates

S-TEN Steel Plate

S Ten Plate

Sulfuric Acid and Hydrochloric Acid Dew-Point Corrosion-Resistant Steel Plates
Wer4 |
Moisture in gas (vol%) | |||||||||||
20 | 10 | 5 | 15 | 30 | 25 | 45 | 35 | 40 | 55 | 50 | 60 | |
0.0 | 60 | 46 | 33 | 53 | 69 | 66 | 79 | 74 | 76 | 84 | 81 | 87 |
0.1 | 103 | 95 | 87 | 100 | 108 | 106 | 114 | 111 | 112 | 117 | 115 | 118 |
1 | 122 | 114 | 106 | 119 | 127 | 125 | 132 | 129 | 130 | 134 | 133 | 135 |
2 | 128 | 120 | 113 | 125 | 133 | 131 | 137 | 134 | 136 | 140 | 139 | 141 |
3 | 132 | 124 | 117 | 128 | 136 | 134 | 141 | 138 | 139 | 143 | 142 | 144 |
4 | 134 | 127 | 119 | 131 | 139 | 137 | 143 | 140 | 142 | 146 | 145 | 147 |
5 | 136 | 129 | 122 | 133 | 141 | 139 | 145 | 142 | 144 | 148 | 146 | 149 |
6 | 138 | 131 | 123 | 135 | 142 | 140 | 147 | 144 | 146 | 149 | 148 | 150 |
7 | 139 | 132 | 125 | 136 | 144 | 142 | 148 | 145 | 147 | 150 | 149 | 151 |
8 | 141 | 133 | 126 | 138 | 145 | 143 | 149 | 147 | 148 | 152 | 151 | 153 |
9 | 142 | 134 | 127 | 139 | 146 | 144 | 150 | 148 | 149 | 153 | 152 | 154 |
10 | 143 | 135 | 129 | 140 | 147 | 145 | 151 | 149 | 150 | 154 | 153 | 155 |
20 | 149 | 142 | 136 | 146 | 153 | 152 | 158 | 155 | 156 | 160 | 159 | 161 |
30 | 153 | 147 | 140 | 150 | 157 | 155 | 161 | 159 | 160 | 163 | 162 | 164 |
40 | 156 | 150 | 143 | 153 | 160 | 158 | 164 | 162 | 163 | 166 | 165 | 167 |
50 | 158 | 152 | 146 | 156 | 162 | 161 | 166 | 164 | 165 | 168 | 167 | 169 |
60 | 160 | 154 | 148 | 158 | 164 | 162 | 168 | 166 | 167 | 170 | 169 | 171 |
70 | 162 | 156 | 149 | 159 | 166 | 164 | 169 | 167 | 168 | 171 | 171 | 172 |
80 | 163 | 157 | 151 | 161 | 167 | 165 | 171 | 168 | 170 | 173 | 172 | 174 |
90 | 164 | 158 | 152 | 162 | 168 | 167 | 172 | 170 | 171 | 174 | 173 | 175 |
100 |
166 | 159 | 154 | 163 | 169 | 168 | 173 | 171 | 172 | 175 | 174 | 176 |
200 |
173 | 167 | 162 | 171 | 176 | 175 | 180 | 178 | 179 | 182 | 181 | 182 |
300 |
177 | 172 | 167 | 175 | 181 | 179 | 184 | 182 | 183 | 186 | 185 | 187 |
400 |
181 | 175 | 170 | 178 | 184 | 182 | 187 | 185 | 186 | 189 | 188 | 189 |
500 |
183 | 178 | 173 | 181 | 186 | 185 | 189 | 188 | 189 | 191 | 190 | 192 |
Grade | Product | Thickness[diameter](mm) |
S-TEN 1 | Hot-rolled sheet and plate 1 ) | 1.6≦ t ≦20.2 |
Cold-rolled sheet | 0.6≦ t ≦2.3 | |
Seamless pipe and tube 2 ) | Outside dia.: 31.8~426 Wall thickness: 3.0~50 | |
ERW pipe and tube 2 ) | Outside dia.: 19.0~114.3 Wall thickness: 2.0~8.9 | |
Large-diameter pipe | Outside dia.: 400~2,500 Wall thickness: 6.0~20 | |
S-TEN 2 | Hot-rolled sheet and plate 1 ) | 1.6≦ t ≦25.4 |
Cold-rolled sheet | 0.6≦ t ≦2.3 | |
Bar and bar-in-coil | t ≦38 |
Grade | Initial temperature of specimen | Thickness (mm) | Maximum hardness (Hv) |
S-TEN 1 | Room temperature | 16 | 189 |
S-TEN 2 | Room temperature | 16 | 242 |
Elongation value by thickness division | ||||||
1< t ≦2mm | 5< t ≦6mm | 3< t ≦4mm | 2< t ≦3mm | 4< t ≦5mm | 7< t < 8mm | 6< t ≦7mm |
26 | 32 | 29 | 28 | 30 | 35 | 34 |
Grade | Kind of shielding material | |||
Submerged arc welding (SAW) | Shielded metal arc welding (SMAW) | Gas shielded metal arc welding | ||
TIG welding (GTAW) | MAG welding (FCAW) | |||
S-TEN 1 | NSSW Y-1ST × NSSW NB-1ST ☆(JIS Z 3183 S502-H) |
NSSW ST-16M1 ) ☆(JIS Z 3211 E4916-G) |
NSSW YT-1ST ☆(JIS Z 3313 T49J0TG-1GA-U) |
NSSW SF-1ST ☆(JIS Z 3313 T49J0T1-1CA-UH5) (AWS S-36 E81T1-C1A0-G) |
S-TEN 2 | — | NSSW ST-16Cr 1 ) ☆(JIS Z 3211 E5516-G) |
— | NSSW FC-23ST ☆(JIS Z 3313 T49J0T1-1CA-U) |
NSSW ST-03Cr 2 ) ☆(JIS Z 3211-E4903-G) |