EN 10149-2 S460MC Plates Supplier In India, get S460 Mc Material cut to your specifications, view Price
Table Of Content
S460mc is a hot-rolled super strength low-alloy grade. S460mc Steel Plate is designed with a superior chemical composition of carbon, silicon, manganese, phosphorus, sulfur, aluminum with additives of niobium, vanadium, and titanium.
The superior concentration in the S460 Mc grade gives these modules excellent resistance to corrosion and oxidation across stress-induced systems. The high yield strength S460mc Steel grade has excellent formability with enhanced load-bearing capacities across different applications.
See S460mc Price Difference in between India and USA
Prices of steels are dependent on supply and demand. The DIN 1.0982 Plates price in India starts at $1 and can extend up to $6.9 per kg depending on the material requirement and composition. S460MC Construction Strength steel plate prices in the USA start at $3 and can go up to $8.
High yield strength EN 10149-2 S460MC Steel Plate Stockist in Mumbai, buy DIN 1.0982 Plates online, check S460mc Vs Ams 6359
- S460mc is designed with a tensile strength of 745mpa with a yield strength of 470mpa. EN 10149-2 S460MC Plates are designed with a tensile strength of 600mpa with a strong yield strength ranging up to 460mpa. S460MC steel plate possesses lower strength in the system over the Ams 6359.
- The EN 10149-2 Grade S460MC Plates possess a higher manganese content; however, the AMS 6359 grade exhibits superior carbon content while also showing the presence of chromium and molybdenum in their concentration.
- EN 10149-2 S460MC Automobile structure steel plate is seen in frames in cars and other automobile systems. AMS 6359 grade is seen in aircraft landing gears and structural parts.
Dealer and Distributors of EN 10149-2 Grade S460MC Plates with different type of thickness, Specification, Hardness at triton, view S460mc Steel Equivalent
S460MC Hardness
this High yield strength grades designed with a superior hardness of Brinell 220 to 240 HBW.
Density of S460mc Steel
it is designed with a density of 7850 kg/m3.
Specifications | ASME/ ASTM |
Standard | ASME, ASTM and API |
Specialize | Perforated Sheet, Shim Sheet, B. Q. Profile. |
Size | 1000 TO 2500 MM WIDTH, 0.5 TO 200 MM THICK IN & 2500 TO 12500 MM LENGTH |
Form | Foils, Coils, Rolls, Shim Sheet, Plain Sheet, Ring (Flange), Chequered Plate, Perforated Sheet, Flats, Strip, Blank (Circle) |
Finish | Cold rolled sheet (CR), Hot rolled plate (HR), 2D, 2B, SATIN (Met with Plastic Coated), BA NO(8) |
Hardness | Hard, Soft, Quarter Hard, Half Hard, Spring Hard etc. |
Grade | EN 10149-2 S460MC DIN 1.0982 |
Description | Price |
S460mc Hot Rolled Alloy Plate | US $ 499-599 / Ton |
High Strength S460mc Plate | US $ 499-599 / Ton |
S460mc High Yield Strength for Cold Forming Plate | US $ 1150-1450 / Ton |
S460mc Hot Rolled High Strength Plate | US $ 499-599 / Ton |
En10149-2 S420mc Steel Plate | US $ 1150-1450 / Ton |
S460mc Alloy Sheet | US $ 600-800 / Ton |
S460mc Auto Beam Sheet | US $ 800-809 / Ton |
S460mc Pickling Plate Hot Rolled | US $ 300-1000 / Ton |
Hot Rolled Mild Sheet S460mc | US $ 600-800 / Ton |

S460mc Steel Plate

EN 10149-2 S460MC Plates

S460 Mc Material

DIN 1.0982 Plates

EN 10149-2 Grade S460MC Plates

S460MC Construction Strength steel plate
Provide S460mc High Yield Strength for Cold Forming Steel Plate, Are You looking for S460mc Steel Plate Weight Chart ? get here as well as check S460mc Material Properties
Properties of S460mc Material
it is a high-strength alloy grade. The S460mc Steel Equivalent grades are BS 50F45, ASTM GR65, SEW092, NFA E455, UNE AE 440HC and QStE460TM grades. The Equivalent may have some differences; however, they exhibit excellent bending and cutting characteristics. The S460mc Material Equivalent components can be easily welded following standard welding operations, making them highly desirable.
Designed with excellent mechanical strength the S460mc Material Properties exhibit a minimum yield strength of 460mpa with a tensile strength ranging between 520mpa to 670mpa. The superior S460mc Steel Mechanical Properties allows these modules to be employed in pressure vessels and offshore applications in stress-induced environments. Apart from this, the versatile S460mc Steel Properties allow these modules to be readily elongated by a minimum of 17% in the system.
Thickness | 2.00-3.00 |
CEV Typical | 0.29 |
CET Typical | 0.20 |
Designation | Test Temperature | Min. Impact Energy for logitudinal charpy v-notch test |
B |
- |
- |
D |
-20° C |
40 J |
E |
-40° C |
27 J |
(Mpa) ReH-Minimun yield strength | (mm)Nominal thickness | (mm) Nominal thickness | (Mpa) Rm-Tensile strength | Lo=5,65√So(%) A-Minimum elongation | Lo=Lo=80mm(%) A-Minimum elongation |
460 | From3 | to3 | 520-670 | 17 | 14 |
Si | C | Mn | S | P | Al | V | Nb | Ti |
0,50 max | 0,12 max | 1.6 max | 0.015 | 0.025 max | 0.015 | 0.2 | 0.09 | 0.15 |
Material : 1.0982 |
Comparison of grades | |
ASTM | Gr.65 | |
UNE | AE440HC | |
SEW092 | QStE 460TM | |
AFNOR | E455D | |
BS | 50F45 |
Stocking Distributors of Aperam, POSCO, Arcelor Mittal, Thyssenkrup, Outokumpu, Nippon Metal and many more brand S460MC Construction Strength steel plate for sale, view S460mc Steel Mechanical Properties online
- aircraft structures
- aerospace vehicle structures
- Automobile industry
- weapons structural parts
- propeller components
- card wheel hub