EN 10025-6 Weldox 700 Sheet Supplier In India, keep stock of S690ql Plate in various sizes . view Equivalent Material
Table Of Content
- What is S690QL Steel Plate?
- En 10025 6 S690ql Specification
- Weldox 700 Grade Designation
- Strenx S690ql Plate Price
- En 10025 6 S690ql Equivalent Material
- S690ql Steel Plate Also Known as
- Most Selling Types of Ste 690 Steel Plate
- S690ql Mechanical Properties
- EN 10025-6 Grade S690QL Composition
- Ste 690 Steel Properties
- S690ql Steel Hardness
- Technical Condition of S690QL Plates
- Welding s690ql steel
- Weldox 700 vs strenx 700
- En 10025 6 2004 V Notch Impact Testing
- Dillimax 690t Plates Weight
- Maximum CEV Values of EN 10025-2 S690QL
- S690ql Plate Sizes in Stock
- Weldox 700 Plate Tolerances on width
- Strenx S690ql Plate Processing
- Ste 690 Steel Plate Stock list
- En 10025 6 S690ql Applications
- Weldox 700 Plate Technical data
- Other Types of EN 10025-6 S690QL
- Stocking Distributors of below Manufacturer
- EN 10025-2 S690QL Plates Testing
- Packaging of En 10025 6 S690ql Plate
S690QL Steel Plate is a super strength structural steel grade. S690QL Steel Plate is designed with a superior chemical composition allowing these modules to have good tolerances against different corrosive media. The En 10025 6 S690ql structural steel grade shows enhanced protection against wear and tear across stress-induced environments. S690ql Steel Plate is quenched and tempered to give its extraordinary strength in different structural steel applications.
The energy-efficient En 10025 6 2004 modules are lightweight and don’t put pressure on any applications they are utilized. The versatile Weldox 700 shows excellent formability and can be welded following standard welding procedures. With excellent consistency and hardness, the Strenx S690ql grade has enhanced toughness and superior resistance against fracture induced by stress. Most S690ql Suppliers manufacture this robust grade in thickness between 4mm, up to 35mm, depending on the project requirements. The S690ql Plates Stockist put these plates through low notch testing temperatures allowing them to be utilized in transportation and lifting of heavy material.
Material | EN 10025-6 Grade S690QL High Yield Structural Steels |
Width | 1,500mm to 2,500mm |
Thickness | 8-50 mm |
Length | 6,000mm to 12,000mm |
Test certificates (MTC) | EN 10204 2.2/3.1 |
Brands | Dillinger, Essar, TATA, SAIL, JSW, JSPL, Clabecq, POSCO, Uttam, Thyssen, and Mills |
Heat Treatment |
Q+T(quenched and Tempered ) |
Application of EN 10025 S690QL |
|
Grade | A709-100, S690 QL 1, S690QL EN10137-2 EN10025-6:2004, NAXTRA 70, DILLIMAX 690, E690, WELDOX 700, JFE HITEN 780LE, S690 Q, ALFORM 700, S690 QL |
Value Added Services at Triton |
- S = Structural Steels
- 690 MPa= minimum yield strength
- Q = Quenching and Tempering
- L = Low notch toughness testing temperature
What is weldox 700 Meaning?
Weldox 700 is a structural steel grade with superior yield strength. Weldox grade implies that it can be easily welded and has excellent formability. The 700 indicates the yield strength this grade possesses.
Description | Price |
S690ql High Strength Steel Sheet | US $ 99-399 / Piece |
Building Material S690ql High Strength Steel Plate | US $ 500-900 / Ton |
S690ql Shipbuilding Steel Plate | US $ 500 / Ton |
S690ql En10025 Hot Rolled High Strength Steel Plate | US $ 680-815 / Ton |
S690ql High Strength Steel Sheet | US $ 499-599 / Ton |
S690ql, 1.8928, DIN Tste690V High-Strength Fine-Grain Steel Plate | US $ 800-1000 / Ton |
Plate with High-Strength Steel S690ql En10025 Hot Rolled | US $ 680 / Ton |
S690ql is a structural high-strength grade. The ASTM En 10025 6 S690ql Equivalent Astm is the Q345 grade. The grade exhibits outstanding cold stamping and low-temperature properties. The S690ql Plate Equivalent in France is the AFNOR/NF A36-204 : E690T, E690TFP, S690T versatile grade. In Europe, the En 10025 6 S690ql Equivalent is the S690QL EN10137-2 EN10025-6:2004 material.
In old European standard material grade, the S690ql Plate Equivalent is the EN FeE690VKT, with Sweden having the versatile material grade of SS 2625 WELDOX 700. The S690ql Equivalent Material in Japan is JIS JFE HITEN 780LE with ISO standard of ISO 4952 E690 grade. In Austria, the equivalent material is ALFORM 700. S690ql Equivalent Indian Standard is the Rockstar steel grade.
Grade | Standards | Country |
A709-100 | ASTM | USA |
S690QL EN10137-2 EN10025-6:2004 | EN | EUROPE |
E690T E690TFP S690T | AFNOR/ NF A36- 204 | FRANCE |
TStE690V DILLIMAX 690 NAXTRA 70 | DIN, WNr | GERMANY |
2625 WELDOX 700 | SS | SWEDON |
FeE690VKT | EN | EUROPEAN (OLD) |
JFE HITEN 780LE | JIS | JAPAN |
E690 | ISO 4952 | INTER |
ALFORM 700 | AUSTRIA |
Are you looking for S690ql Plates Stockist who is authentic and professional for Strenx S690ql High Yield Steel Plates ? get Hardness and Thickness Chart In Mm
- High Strength Structural Steel Plate,
- High Yield Quenched and Tempered Steel Plate
- HSLA
- High Strength Quenched and Tempered Steel Plate
- High Strength Low Alloy Steel Plate
- High Yield Structural Steel Plate
- Industeel – Supralsim 690, Superelso 690, Superelso 960, Superelso 890,
- Ilsenburger Grobblech – Maxil 690, MAxil 890,Maxil 960
- Thyssen –Naxtra M700, XABO 890, XABO 960
- Voest Alpine – Aldur 700QL, Alform 700M
- Corus/ Tata –RQT70, RQT 90
- SSAB – Weldox 700, Weldox 900, Weldox 960

S690ql 50mn Carbon Steel Plate

En 10025-6 S690ql High Yield Steel Plates

En 10025–6:2004 S690ql Steel Plates

High Yield En10025 Grade S690 Ql Plates
Nominal Thickness (mm) | 50 - 100 | 3 - 50 | 100 - 150 |
---|---|---|---|
KV - Impact energy (J) longitudinal | 40 | 50 | 30 |
Rm - Tensile strength (MPa) | 650 | 690 | 630 |
Rm - Tensile strength (MPa) | 760 - 930 | 770 - 940 | 710 - 900 |
Test Temperature | -20° | 0° | -40° |
A - Min. elongation Lo = 5,65 √ So (%) | 14 |
Element | Percentage % | Element | Percentage % |
Si | 0.80 | Mo | 0.70 |
C | 0.20 | Cu | 0.50 |
Mn | 1.70 | Nb* | 0.06 |
S | 0.015 | Ti* | 0.05 |
P | 0.025 | Ni | 2.0 |
N | 0.015 | V* | 0.12 |
B | 0.0050 | Zr* | 0.15 |
Cr | 1.50 |
The high-strength S690ql steel grade is designed with a Brinell hardness rating of 414HBW.
What is S690ql Plate Thickness?
S690ql is a quenched and tempered high-strength grade. The EN 10025-6 S690QL High Yield Steel Plates are designed in thickness between 6mm up to 250mm.
S690QL Steel Plate Supplier , Dealer of EN 10025 S690QL Plate with width of 1250mm to 2500mm and thickness of 3mm to 300mm or as per need, view Properties & Weldox 700 vs strenx 700
Weldox 700 and strenx 700 are structural steel grades designed with a yield strength of up to 700mpa. Both these grades are similar; however, Strenx 700 is an alteration to the previous called Weldox 700 grade.
- BQ Plates with IBR form IV
- to EN 10204 3.1 / 3.2 MTC acc
- Furnace Normalised
- Charpy Impact tested at -20 / - 46 DegC.
- as per SA 578 Ultrasonic tested or as per need
ORIENTATION | MATERIAL | at -60 DEG C | at -20 DEG C | at 0 DEG C | at -40 DEG C |
---|---|---|---|---|---|
Longitudinal | S690QL | 40J | 50J | 30J | |
Transverse | 30J | 35J | 27J |

for nominal thickness in mm of product Max. CEV in % |
|||
Steel No. |
≤ 50 |
> 50 ≤ 100 |
> 100 ≤ 150 |
1.8928 |
0.65 |
0.77 |
0.83 |
Width | 1,500mm to 2,500mm |
Thickness | 8-50 mm |
Length | 6,000mm to 12,000mm |
- Shape, length, width tolerances According to EN 10029 .
- Thickness tolerance According to EN 10029 Class B, and offer tighter tolerances upon request
- Flatness Tolerance According to EN 10029 Class-N type-H .
Ste 690 steel is a high-strength module designed with superior hardness and tolerances. The grade is designed with a yield strength of a minimum of 690mpa with a tensile strength between 770mpa to 940mpa. Designed with excellent notch impact resistances the material can be elongated by a minimum of 14%.
S690ql Steel Plate Manufacturer In India, S690QL High Yield Strength Steel Plate can be manufactured with Special finish like No. 8 mirror finish/ BA /No.4 matte finish with or without PVC coating , check welding
Most Selling Types of S690QL Steel Plate

S690QL Steel Plate

EN 10025-6 Weldox 700 Sheet

S690ql Plate

Strenx S690ql Plate

Ste 690 Steel Plate

En 10025 6 S690ql Plate
S690ql steel is a versatile grade that can be welded following standard welding procedures. MIG welding procedure is generally utilized in welding these high-strength modules. In this process, heat is produced by creating an arc between the metal piece and an electrode. The electrode is melted to form a strong weld. Cold cracking of quenched and tempered plates is the major concern in these grades. To overcome this problem filler material of similar or lower strength than the base metal can be employed.
CEV | Weldability |
---|---|
0.36 - 0.40 | Very Good |
<0.35 | Excellent |
0.46 - 0.50 | Fair |
0.41 - 0.45 | Good |
>50 | Poor |
|
|
Min. Thk (milimeter) |
Standard |
Max. Thk (milimeter) |
Grade |
6 |
Dillinger |
200 |
Dillimax 690T |
6 |
Dillinger |
100 |
Dillimax 965 T |
6 |
EN10025 - 6 |
200 |
S690QL |
6 |
Dillinger |
150 |
Dillimax 690 E |
6 |
EN10025 - 6 |
150 |
S690QL1 |
6 |
Dillinger |
100 |
Dillimax 890 T |
6 |
Dillinger |
40 |
Dillimax 1100 |
6 |
EN10025 - 6 |
100 |
S890QL |
- Lifting equipment
- Machine building
- Heavy transportation
- Steel constructions
Size mm |
Width |
Thick |
Length |
6 * 1500 * 6100 |
1500 | 6 |
6100 |
6 * 1500 * 13000 |
6 |
13000 |
|
6 * 1500 * 6100 | 6 |
6100 | |
6 |
|||
6 |
|||
6 |
|||
6 |
|||
6 |
|||
6 * 1500 * 8500 |
6 |
8500 |
|
6 * 1500 * 6100 |
6 |
6100 |
|
6 * 1500 * 8500 |
6 |
8500 |
|
6 * 1550 * 11000 |
6 |
11000 |
|
6 * 1500 * 8500 |
6 |
8500 |
|
7 * 1500 * 11000 | 7 |
11000 | |
7 |
|||
7 |
|||
8 * 1500 * 11000 |
8 |
||
7 * 1500 * 11000 |
7 |
||
8 * 1500 * 11000 | 8 | ||
8 * 1550 * 6100 |
1550 |
6100 |
|
8 * 1500 * 13000 |
1500 |
13000 |
|
8 * 1550 * 6100 |
1550 |
6100 |
|
8 * 1800 * 13000 |
1800 |
13000 |
|
8 * 1550 * 6100 |
1550 |
6100 |
|
8 * 1800 * 13000 |
1800 |
13000 |
|
3 * 1400 * 9000 |
1400 |
3 |
9000 |
4 * 1500 * 13000 |
1500 |
4 |
13000 |
3 * 1400 * 9000 |
1400 |
3 |
9000 |
5 * 1500 * 12000 | 1500 |
5 |
12000 |
1500 |
5 |
12000 |
|
6 * 1650 * 12300 |
1650 |
6 |
12300 |
6 * 1650 * 12300 |
1650 |
6 |
12300 |
7 * 1500 * 12000 |
1500 |
7 |
12000 |
6 * 1650 * 2500 |
1650 |
6 |
2500 |
7 * 1500 * 12000 |
1500 |
7 |
12000 |
8 * 1800 * 13000 |
1800 |
8 |
13000 |
8 * 1500 * 12000 |
1500 |
8 |
12000 |
12 * 1500 * 12000 |
1500 |
12 |
12000 |
3 * 1400 * 9000 |
1400 |
3 |
9000 |
12 * 1500 * 12000 |
1500 | 12 |
12000 |
4 * 1500 * 13000 | 4 |
13000 |
|
4 |
13000 |
||
5 * 1500 * 12000 |
1500 |
5 |
12000 |
As Distributors keep major stock of En 10025 S690ql Ultra High Strength Steel Plate used in shipbuilding and offshore platforms
![]() |
![]() |
![]() |
![]() |
APERAM |
Essar Steel |
SSAB |
JFE Steel Corporation |
![]() |
![]() |
![]() |
![]() |
JSW Steel Ltd. |
POSCO |
Salzgitter AG |
Nippon Steel & Sumitomo Metal |
- Flaring test
- Third party inspection
- Hardness test
- Durability test
- Flattening test
- Pitting and corrosion resistance test
- Visual inspection
- Chemical composition analysis
- Positive material identification test
Types of Packaging:
- as per customer's requirements
- Wooden Palate
- Crates (steel/wooden)
- Wooden Boxes
- Bundles
Special Features:
- Each bundle covered with plastic for protection against extreme weather.
- Bundles strapped with Metal strips.
- Packaging list (laminated) placed with box/crate.