SA 516 Gr 60 Plate

 

Supplier of ASTM A516 Grade 60 Plate in India, buy Gr 60 Material cut to your specifications, check price

 

SA 516 Gr 60 Plate

 

 

SA 516 Gr 60 is a boiler vessel grade that is designed for use in moderate to low-temperature applications. The SA 516 Gr 60 Plate is made up of chemical composition of carbon, silicon, manganese, phosphorous, sulfur, aluminum, chromium, copper, nickel, molybdenum, niobium, titanium, and vanadium. This content gives these plates superior resistance against corrosive and oxidative media. Designed in thickness above 6mm, the SA 516 grade 60 Plate provides enhanced strength and stability to different modules across different stress-induced setups. The ASTM A516 Grade 60 Plate can be utilized to process and store toxic fluids and gases within these high-strength boilers. Our staff makes use of the best raw materials and cutting-edge technology to produce the best products across different niches.

The A516 Gr 60 Material grade is designed with superior mechanical properties. The material has an outstanding tensile strength between 415mpa to 550mpa with a minimum yield strength of 220mpa. The material can be elongated by a minimum of 17% at 200mm. The Sa 516 Gr 60 Equivalent Material for DIN standard is the DIN 17155 HII, with the British standard categorizing the BS1501-161-430A standard and European norms following the EN10028 P265GH standard. If you want to customize the components in this grade or want to know more about its features, contact us or visit any of our outlets for more information.

SA 516 Gr 60 Plate

 

Stockholder of SA 516 Steel Plates Grade 60 in Mumbai, purchase Gr. 60 Plates online with full mill test reports, compare SA 516 Gr 60 Vs 70.

 

ASTM A516 Grade 60 Plate Price in india

Description Per Unit (INR) Unit
ASTM A516 GRADE 60 SOLID METALLIC SHEET/PLATE SIZE:2500X2500 9 MM THK 26,750 PCS
SIZE:6000X2000 8 MM THK SOLID METALLIC SHEET/PLATE ASTM A516 GRADE 60 45,654 PCS
600 X 1200 X 50MM THK C.S. PLATE ASTM SA 516 GR60 30,271 NOS
2000 X 2000 X 8MM THK PLATE ASTM SA 516 GR60 20,024 NOS
SIZE : 32MM X 1.25M X 5M. ASTM A 516 GRADE 60 PLATE 132,971 NOS

 

Sa 516 Gr 60 Vs 70

Both of these modules can be distinguished by the characteristics stated below.

  • The chemical concentration of Sa 516 Gr 70 is higher than that of grade 60. As a result, the grade 70 modules outperform the grade 60 modules in terms of strength.
  • The tensile strength of Grade 60 modules is 415-550 MPa, with a minimum yield strength of 220 MPa. The tensile strength of Grade 70 components is 485-620 MPa, with a yield strength of 260 MPa.

 

Sa 516 Gr 60 Specification

Test certificates 3.1 or 3.1B MTC to EN10204,HIC Tested
Material ASME SA 516/ASTM A516 Gr 60 Plate (Pressure Vessel)
Brands TATA, Dillinger, Uttam, JSPL, Essar, Thyssen, JSW, Clabecq, POSCO, SAIL, and Mills
Western European Steel mills Thyssen, Dillinger, Clabecq
Dimensions
  • Thickness up to 150 mm
  • Width up to 3.5 metres
  • Length up to 12 metres
Uses
  • Bridge construction
  • Construction
  • Energy & Power Industry
  • Pressure Vessel
  • Tanks
Equivalent
  • BS1501 151 400 A/B
  • BS1501 161 430 A/B
  • DIN 17155 HII
  • SS1431-01
  • P265GH to EN10028-3
  • NF A42 CP
  • SS1430-01
  • NF A42 AP
  • SS1432-01
Services
  • Saw Cutting
  • Annealing
  • Shearing
  • Grinding
  • Laser Cutting
  • Drilling
  • Oxy-propane Flame Cutting
  • Surface Grinding
  • Metal Processing
Conditions
  • As-rolled (+AR)
  • Normalised rolling (+N)
  • Mill edges
  • pickled and oiled
  • Suitable for post-galvanising (Class 1)
  • pickled
  • Suitable for cold forming (C)
  • non-pickled
  • Trimmed edges

 

Technical conditions

  • Production: Hot Rolled
  • MTC acc to EN 10204 / 3.2
  • Charpy Impact tested at -20°C / -29°C / - 46°C.
  • Ultrasonic tested as per SA 578 or any other as per requirement
  • BQ Plates with IBR form IV
  • Heat Treatment : Rolled / Normalised / N+T QT

 

Tolerances of SA 516 Steel Plates Grade 60

Tolerances of SA 516 Steel Plates Grade 60

 

Sa 516 Gr 60 Allowable Stress

Allowable The greatest stress a module can withstand under various pressures until it fails is described as stress. In temperatures ranging from -30 to 250 degrees Celsius, the Sa 516 Gr 60 grade has a stress of 118. The stress of these modules is 12.7 at 550 degrees Fahrenheit.

 

Various Types of SA 516 Gr 60 Plate

SA 516 Steel Plates Grade 60
SA 516 Steel Plate Grade 60
ASME SA516 Grade 60 Plate
ASME SA516 Grade 60 Plate
SA 516 GR.60 NACE and HIC Plates
SA 516 GR.60 NACE and HIC Plate
SA 516 Gr 60 Plate
SA 516 Gr 60 Plate
ASTM A516 Grade 60 Plate
ASTM A516 Grade 60 Plate
A516 Gr 60 Material
A516 Gr 60 Material

 

Makes of ASME SA516 Grade 60 Plate

Essar
Jindal Steel
Welspun
SAIL
Essar 
Jindal Steel
Welspun
SAIL
Posco
Arcelor Mittal
Dillinger
Posco
Arcelor Mittal
Dillinger

 

At Triton, we are a dealer and distributor of SA 516 Gr.60 Boiler and Pressure Vessel Steel Plates in a variety of thicknesses, specifications, grades, and dimensions, check view Gr 60 Equivalent Material

 

ASTM A516 GR 60 Plate Dimensions

Grade Thickness in Inches Material Type Length in Inch
SA 516 Gr 60 0.100 - 0.500 Inch Temper Leveled SA 516 Gr 60 Plate 72 - 720 Inch
SA 516 Gr 60 0.188 - 3.54 Inch Mill Plate 154 - 1020 Inch
  0.188 - 0.500 Inch SA 516 Gr 60 Coil for Conversion To 4)  

 

Gr. 60 Plates Sizes in Stock

Sizes in Stock
  • Width up to 3.5 metres
  • Thickness up to 150 mm
  • Length up to 12 metres

 

Most Selling types of SA516 GR60 Plate

A516 Gr.60 Hr Boiler Plates
A516 Gr.60 Hr Boiler Plates
A516 Grade 60 Carbon Steel Plate
A516 Grade 60 Carbon Steel Plate
Sa516 Gr 60 Bq Plates
Sa516 Gr 60 Bq Plates
Lower Temperature Carbon Steel Grade 60 Plate
Lower Temperature Carbon Steel Grade 60 Plate
Astm A 516 Gr 60 CS Plate
Astm A 516 Gr 60 CS Plate
ASTM a 516 Hot Rolled Steel Plate for Construction
ASTM a 516 Hot Rolled Steel Plate for Construction
SA 516 Gr 60 Pressure Steel Plate
SA 516 Gr 60 Pressure Steel Plate
Gr 60 Material
Gr 60 Material

Weight Chart of Gr.60 Pressure Vessel Steel Plates

Weight Chart of Gr.60 Pressure Vessel Steel Plates

 

Sa 516 Gr 60 Plate Thickness Availability

Thickness in mm
6 mm
15 mm
50 mm
4 mm
12 mm
40 mm
5 mm
8 mm
25 mm
6 mm
10 mm
32 mm
8 mm
20 mm
 
60 mm
16 mm
 

 

Why Choose Triton for Gr 60 Material

  • Thickness – We have plates up to 150 mm in stock.
  • Availability – We have one of the most extensive stock selections in the industry.
  • Width – a big supply of 3m plates to save money on welding
  • Reliability –Dillinger Hutte provided our thick A516 60 plates.

 

Astm A516 Gr 60 Equivalent European

Standard Description
ASME/ ASTM SA516 / A516 Grade 60
European EN EN10028 P265GH

 

ASTM A516 Grade 60 Mechanical Properties

Element  
Tensile Stress, MPa (ksi) 415 - 550 MPa (60 - 80 ksi)
Yield Stress, min MPa (ksi) 220 MPa (32 ksi)
Elongation minimum, % 200 mm (8 in) 21%
Elongation minimum, % 50 mm (2 in) 25%

 

Astm A516 Gr 60 Equivalent

Standard Description
ASME/ ASTM SA516 / A516 Grade 60
DIN DIN 17155 HII
British BS1501-161-430A
European EN EN10028 P265GH


ASME SA 516 GR.60 NACE and HIC Plates Stockist,if you are looking for GR60 Plate Weight Chart ? get here as well as view Chemical Composition

 

Sa 516 Gr 60 Chemical Composition

ELEMENT THICKNESS (mm) COMPOSITION (%)
Carbon maximum 12.5 and under 00.21
  over 12.5 to 50 00.23
  over 50 to 100 00.25
  over 100 00.27
Manganese (Mn) 12.5 and under 00.60 - 0.90
  12.5 and under 00.55 - 0.98
  over 12.5 00.85 - 1.20
  over 12.5 00.79 - 1.30
Phosphorus (maximum)   00.025
Sulphur (maximum)   00.025
Silicon (Si)   00.15 - 0.40
    00.13 - 0.45

 

We have ASME SA516 Grade 60 Plate in stock from Aperam, POSCO, Jindal Stainless, Arcelor Mittal, Thyssenkrup, Outokumpu, Nippon Metal, and many other manufacturers, view Sa 516 Gr 60 Specification

 

Sa 516 Gr 60 Density

The metric density of Sa 516 Gr 60 is 7.80 grammes per cubic centimetre.

 

Sa 516 Gr 60 Hardness

Metal hardness varies depending on the kind of material and how it is processed. The Brinell hardness of the Sa 516 Gr 60 is unknown.

 

Sa 516 Gr 60 Temperature Range

The Sa 516 Gr 60 is developed for low-temperature applications. These modules can operate at temperatures as low as -45 degrees Celsius and can endure temperatures as high as 340 degrees.

 

Suplementary Requirements of SA516 Gr.60 Plate 

A 516 can meet the following ASTM A20 additional requirements:

  • S4.1 – Additional Tensile Test
  • S2 – Product Analysis
  • S1 – Vacuum treatment
  • S3 – Simulated Post Weld Heat Treatment
  • S6 – Dropweight Test
  • S5 – Impact Test (Charpy Notch)
  • S8 – UT (Ultrasonic Testing) to A435
  • S7 – Hot Tensile Test
  • S11 – UT to A577
  • S9 – Magnetic Particle Examination
  • S17 – Vacum Carbon Deoxidised Steel
  • S12 – UT yo A578

 

A516 Grade 60 BQ Plates Processing

A516 Grade 60 BQ Plates Processing
  • Testing
  • Forming Drilling/ Machining
  • Cutting
  • Grinding

 

 

A516 60 Pressure Vessel Steel Application

  • Dished Ends
  • Boilers
  • Oilfield Fabrications
  • Calorifiers
  • Heat Exchangers
  • Flanges
  • Pressure Vessels
  • Pipelines
  • Condensers
  • Storage Tanks

 

Ready Stock of Astm A516 Grade 60 Boiler Plate

  • SA 516 Gr 60 Plate
  • SA 516 grade 60 Plate
  • ASTM A516 Grade 60 Plate
  • ASME SA516 Grade 60 Plate
  • ASTM A516 GR 60 Plate
  • ASME SA 516 GR.60 NACE and HIC Plates
  • SA 516 Steel Plates Grade 60
  • ASTM A516 Grade 60
  • ASME SA516 Grade 60
  • SA 516 Gr.60 Boiler & Pressure Vessel Steel Plates
  • ASME SA516 GRADE 60 Plate
  • SA516 GR60 Plate
  • SA 516 Gr. 60 Plates

 

Destructive and Non-Destructive Testing

Destructive and Non-Destructive Testing
  • Firmness test
  • Chemical examination-Spectro analysis
  • Mechanical examining like Elongation, tensile
    and reduction of area.
  • Hydrostatic analysis
  • Impact analysis
  • Positive material recognition

 

Asme Sa516 60 Steel Plates Documentation

  • Third party inspection report
  • IGC test report
  • Raw material test report
  • Mill test report
  • Guarantee letter
  • MTC report
  • Attested certificate by the supplier

 

A516 Grade 60 Plates Packaging

A516 Grade 60 Plates PackagingSuppliers choose only the most noticeable materials while exporting to avoid harm. The specifics are as follows:

  • Wooden boxes/ crates/ pallets
  • Big rolls with spools
  • Bundles with plastic wrapping
  • Industrial packing techniques