Stainless Steel 304 Sheet

 

India's Oldest Supplier of ASTM A240 Type 304 2b Stainless Steel Plate for high temperature applications. Please contact us for a free quote.

 

Stainless Steel 304 Sheet

 

 

Stainless Steel 304 Sheet

Stainless Steel 304 Sheet

A240 Gr 304 Plate

A240 Gr 304 Plate

SS 304 Strip

SS 304 Strip

 

What is Stainless Steel 304 Sheet?

Grade SUS 304 or as referred to alloy 18-8 is a chromium-nickel alloyed austenitic stainless steel. In comparison to other nickel steels as well as other stainless steel grades, strips made from ASTM A240 304 SS are known for their economic value and versatile application.

Hence, most industries prefer using 304 Stainless Steel shim stock for the most basic or general applications. Not only does the SS Werkstoff No 1.4301 bring down the cost of the entire application, but it also provides some resistance to corrosion on some levels. In fact, the ASTM A240 Type 304 sheet exhibits excellent mechanical properties such as toughness and tensile strength at cryogenic settings. The melting point for Stainless Steel 304 is between 2505 – 2590°F. The shear strength for the SA 240 Gr 304 SS strip is approximately 43900 PSI, with its yield strength being at 42 KSI. Typically, grade 304 sheets are available across markets with standard thickness ranging from 4.8 mm up to 152.4 mm.

Stainless Steel 304 Sheet

 

The 304 grade is an austenite version of stainless steel. A Stainless Steel 304 Sheet is designed with a superior composition of nickel and chromium with other constituting alloys. These sheets showcase enhanced corrosion and oxidation resistance properties across an array of stress-induced setups. The SS 304 Sheet is designed in thickness below 6mm but above 0.5mm. These sheets add an aesthetical appeal to the component and are not utilized in applications to give them stability.

A Stainless Steel 304 Plate is a module that is designed in thickness above 6mm that can extend up to 100mm or more. These plates are very rigid and provide stability and support to different applications. The A240 Type 304 Plate is highly versatile and has enhanced forming capabilities. These high-strength components can be welded to subsequent modules making use of standard welding procedures. SS 304 Plate is produced by our experienced staff with the best raw materials and latest technology. These quality assured products can be custom designed in a wide range of shapes and sizes.

A Stainless Steel 304 Perforated Sheet is a metal where machinery is used to stamp holes or designs on the metal. These sheets are very aesthetically pleasing and can be built as per your choice. Similarly, a Stainless Steel 304 Checker Plate is stamped in different shapes and sizes. They are mounted on walls or floors and help prevent skids and any damage to objects falling. A Stainless Steel 304 Mesh Sheet is designed with wires that have small holes.

This sheet can be easily rolled and are a common feature in water, air filtration, decorative equipment, etc. The S30400 Strip has low thickness and plays an important role in acting as a filler material during different types of welding operations. These strips are very reliable and don’t flutter under any pressure. If you have any queries about our product range or their pricing, contact us for more information.

 

What is ASTM A240 Grade 304 Plate?

Essentially, any component produced by the ASTM A240 specification, especially the AISI 304 UNS S30400 sheet are well suited to be used for general applications. However, since the Plate, Sheet, Coil as well as Strips conform to the mechanical and chemical aspects of the requirements of the specification, grade 304 could also be used as a part of pressure vessels.

 

SS 304 Sheet Price Jindal

Dimension Gauge Price
48" x 96" 2B - 12GA $319.95
48" x 96" 2B - 11GA $359.95
48" x 96" #4 - 16GA $236.95
48" x 96" 2B - 18GA $193.95
48" x 96" 2B - 14GA $246.95
48" x 96" 2B - 22GA $123.95
48" x 96" #4 - 24GA $156.95

 

SS 304 Sheet Price Per Kg In Mumbai

Product Stainless Steel 304 Sheet Size Price
Stainless Steel 304 Hot Rolled Plates 6mm to 50mm standard sizes Rs. 200/kg + CST + Freight
Stainless Steel 304 Cold Rolled Sheets 1.0mm to 3.0mm standard sizes Rs. 205/kg + CST + Freight

 

Stainless Steel 304 Sheet Description Unit Stainless Steel 304 Sheet Per Unit (INR)
CR 3 MM SS 304 SHEET KGS 171
JINDAL SS 304 SHEET KGS 171
6.0MMX1500MMX6000-304/NO1/TRIM EDGE HOT/COLD ROLLED STAINLESS STEEL WIDE SHEETS (HAVING >8%) KGS 114
304/2B/TRIM EDGE STAINLESS STEEL HOT/COLD ROLLED WIDE SHEETS (HAVING >8%) 5.0MMX1500MMX6000 KGS 122
1MMX1250MMX2500 -304/2B/TRIM EDGE COLD ROLLED STAINLESS STEEL WIDE SHEETS(HAVING> 8 %) KGS 127
HOT/COLD ROLLED 304/2B/TRIM EDGE STAINLESS STEEL WIDE SHEETS (HAVING >8%) 4.0MMX1500MMX6000 KGS 122
Size:16X16 0.023 DIA ,4X8 SHEET SS304 WIRE MESH PCS 7,908
1.5MMX1250MMX2500 -304/2B/TRIM EDGE STAINLESS STEEL COLD ROLLED WIDE SHEETS(HAVING >8%) KGS 126
2MM THICK 304 SS. SHEETS NOS 14,169

 

We are the largest UNS S30400 Strips stockists and distributors in the world are made in accordance with international production guidelines, view SS 304 Sheet Price Jindal and Stainless Steel 304 Vs 316

 

Stainless Steel 304 Vs 316

Stainless austenitic steel is made up of two major constituents: 304 and 316. Because of the molybdenum component, the grade is more resistant to pitting and corrosive media.The SS316 grade is made up of 16 percent chromium, 10 percent nickel, and 2-3 percent molybdenum. The chemical composition of an SS304 sheet distinguishes it from the latter. The chemical composition of SS304 grade components is 18 percent chromium and 8% nickel.

 

SS 304 Plate Specification

specifications ASTM A240 / ASME SA240 304, EN 10088-2
Surface 2D, 2B, NO.1, BA, NO.8, NO.4, mirror, 8K, hair line, embossed, checkered, Brush, sand
blast, etching, etc
Origin European Origin, Indian Origin, US Origin, Japanese Origin, X Thailand Origin, Japanese Origin,Taiwan Origin
Standard ASTM, ASME, BS, DIN, EN
Length 2440mm, 2000mm, 5800mm, 3000mm, 6000mm, etc
Stainless Steel 304 Sheet Thickness 1mm-200mm
Width
1219mm, 1000mm, 1800mm, 1500mm, 2500mm, 2000mm, 3500mm,3000mm etc
Form Foils, Coils, Rolls, Shim Sheets, Plain Sheets, Perforated Sheets, Strip, Chequered Plate, Blank (Circle), Flats, Ring (Flange) etc.
Brand Name Outokumpoo, Jindal Stainless, POSCO, TISCO, Aperam, North American Stainless, Thyssenkrup
Technique Hot Rolled And Cold Rolled.
Stainless Steel 304 Sheet Price term Ex-Work, CFR, CNF, FOB, CIF
Container 40ft HC: 12032m
Stainless Steel 304 Sheet Size 20ft GP: 5898mm(length)x2352mm(width)x2393mm(high)
40ft GP: 12032mm(length)x2352mm(width)x2393mm(High)
MTC Mill Test Certificate, Available as per EN 10204 3.1
Finish SATIN (Met with Plastic Coated), Cold rolled sheet (CR), 2B, Hot rolled plate (HR), BA NO(8), 2D

 

Grade Specification Comparison

Grade UNS No Old British Euronorm Japanese JIS Swedish SS
En BS Name No
Stainless Steel 304 Sheet S30400 58E 304S31 X5CrNi18-10 1.4301 SUS 304 2332

 

Triton is a distributor of Werkstoff No. 1.4301 Coil and Foil, ensuring high quality and long life, check Stainless Steel 304 Plate Thickness/ Weight/ Size

 

Stainless Steel 304 Sheet vs Plate Thickness

The 304 grade includes plates and sheets as well as other components. The thickness of Stainless Steel 304 Plate is greater than 6mm, and it is frequently used in systems that require strength and support. Sheets, on the other hand, have a thickness of less than 6mm and are ideal for applications that need to reduce weight.

 

Most Frequently used 304 Stainless Steel Sheet

Stainless Steel 304 Sheet
Stainless Steel 304 Sheet
Stainless Steel 304 Plate
Stainless Steel 304 Plate
SS 304 Perforated Sheet
SS 304 Perforated Sheet
UNS S30400 Strip
UNS S30400 Strip
Werkstoff No 1.4301 Coil
Werkstoff No 1.4301 Coil
ASTM A240 Type 304 Plate
ASTM A240 Type 304 Plate

 

Stainless Steel 304 Sheet Thickness

Thickness Size Range Thickness Surface Area per Unit weight Approx Weight per Sheet
inches mm kg/m² lbs/ft² kg lbs
0.015 36 x 120 0.381 3.07566 0.630 8.5617 18.90
0.015 36 x 96 0.381 3.07566 0.630 6.84936 15.12
0.0178 36 x 120 0.45212 3.690792 0.756 10.27404 22.68
0.0178 36 x 96 0.45212 3.690792 0.756 8.22195 18.15
0.0178 48 x 120 0.45212 3.690792 0.756 13.69872 30.24
0.0178 48 x 96 0.45212 3.690792 0.756 10.95807 24.19
0.0235 30 x 120 0.5969 4.921056 1.008 11.4156 25.20
0.0235 30 x 96 0.5969 4.921056 1.008 9.13248 20.16
0.0235 36 x 120 0.5969 4.921056 1.008 13.69872 30.24
0.0235 36 x 96 0.5969 4.921056 1.008 10.95807 24.19
0.0355 36 x 96 0.9017 7.381584 1.512 16.43937 36.29
0.0235 48 x 96 0.5969 4.921056 1.008 14.61378 32.26
0.0235 36 x 144 0.5969 4.921056 1.008 16.43937 36.29
0.0235 48 x 120 0.5969 4.921056 1.008 18.26496 40.32
0.0291 30 x 96 0.73914 6.15132 1.260 11.4156 25.20
0.0235 48 x 144 0.5969 4.921056 1.008 21.92067 48.39
0.0291 30 x 120 0.73914 6.15132 1.260 14.2695 31.50
0.0291 36 x 120 0.73914 6.15132 1.260 17.1234 37.80
0.0291 36 x 96 0.73914 6.15132 1.260 13.69872 30.24
0.0355 30 x 96 0.9017 7.381584 1.512 13.69872 30.24
0.0291 36 x 144 0.73914 6.15132 1.260 20.55261 45.37
0.0291 48 x 120 0.73914 6.15132 1.260 22.83573 50.41
0.0291 48 x 96 0.73914 6.15132 1.260 18.26496 40.32
0.0291 48 x 144 0.73914 6.15132 1.260 27.40197 60.49
0.0355 30 x 120 0.9017 7.381584 1.512 17.1234 37.80

 

Most Common Types A240 Type 304 Plate

SUS 304 Foil
SUS 304 Foil
304 Stainless Steel Hot Rolled Plate
304 Stainless Steel Hot Rolled Plate
AISI 304 Shim Sheet
AISI 304 Shim Sheet
Stainless Steel 304 Cold Rolled Plate
Stainless Steel 304 Cold Rolled Plate
SS 304 Sheet
SS 304 Sheet
SS 304 Plate
SS 304 Plate
304h Plate
304h Plate
304 Matt Finish SS Sheets
304 Matt Finish SS Sheets

 

UNS S30400 Sheet Dimensions

Thickness (mm) Width (mm) Stainless Steel 304 Sheet Length (mm)
0.55  mm 914 & 1219 1828 & 2438
0.70  mm 914 & 1219 1828 & 2438
0.90  mm 914 & 1219 1828 & 2438
1.20  mm 914, 1219 & 1500 1828, 2438, 3000, 3048 & 3658
1.50  mm 914, 1219 & 1500 1828, 2438, 3000, 3048 & 3658
1.60  mm 914, 1219 & 1500 1828, 2438, 3000, 3048 & 3658
2.00  mm 914, 1219 & 1500 1828, 2438, 3000, 3048 & 3658
2.50  mm 914, 1219 & 1500 1828, 2438, 3000, 3048 & 3658
3.00  mm 914, 1219 & 1500 1828, 2438, 3000, 3048 & 3658
4.00  mm 1500 & 2000 3000 &  6000
0.55  mm 1219 2438
0.70  mm 1219 2438
0.90  mm 1219 2438
1.20  mm 1219 2438
1.50  mm 1219 & 1500 2438, 3000 & 3658
1.60  mm 1219 & 1500 2438, 3000 & 3658
2.00  mm 1219 & 1500 2438, 3000 & 3658
2.50  mm 1219 & 1500 2438, 3000 & 3658
3.00  mm 1219 & 1500 2438, 3000 & 3658
4.00  mm 1500 & 2000 3000 & 6000
0.70  mm 914 & 1219 1828 & 2438
0.90  mm 914 & 1219 1828 & 2438
1.2  mm 1250 2500
1.6  mm 1250 2500
2.0  mm 1250 2500
3.0  mm 1250 & 1500 2500, 3000 & 6000
4.0  mm 1250 & 1500 2500, 3000 & 6000

 

Werkstoff No 1.4301 Coil International Standard

  •   ASTM A240
  •   ASME SA 240
  •   ASTM A 959
  •   ASTM A 480
  •   EN ISO 18286
  •   EN ISO 9445
  •   ASME IID
  •   EN 10051
  •   EN 10088-1
  •   ISO 15510

 

1.4301 Stainless Steel Sheets Possible Alternative Grades

Grade Why it might be chosen instead of 304
302HQ Cold forging screws, bolts, and rivets requires a lower work hardening rate.
3CR12 The reduced corrosion resistance and consequent discoloration are tolerated in exchange for a lower cost.
301L Certain roll formed or stretch formed components require a higher work hardening rate grade.
316 In chloride settings, greater resistance to pitting and crevice corrosion is required.
303 Lower corrosion resistance, formability, and weldability are acceptable in exchange for higher machinability.
321 It is necessary to improve resistance to temperatures of roughly 600-900°C... The hot strength of 321 is higher.
430 The lowered corrosion resistance and fabrication qualities are acceptable in exchange for a lower cost.


Stainless Steel 304 Sheet Weight Chart

Stainless Steel 304 Sheet Weight per
sheet (Kg)
Size (mm) Weight per
sheet (Kg)
Size (mm)
17.9 2500 x1250 x 0.7 55.3 3000 x 1500 x 1.5
11.5 2000 x1000 x 0.7 38.4 2500 x 1250 x 1.5
14.7 2000 x1000 x 0.9 32.7 2000 x 1000 x 2.0
16.4 2000 x1000 x 1.0 73.7 3000 x 1500 x 2.0
23.0 2500 x1250 x 0.9 51.2 2500 x 1250 x 2.0
36.8 3000 x1500 x 1.0 63.9 2500 x 1250 x 2.5
25.6 2500 x1250 x 1.0 40.9 2000 x 1000 x 2.5
19.6 2000 x1000 x 1.2 92.1 3000 x 1500 x 2.5
44.2 3000 x1500 x 1.2 77.5 2500 x 1250 x 3.0
30.7 2500 x1250 x 1.2 49.6 2000 x 1000 x 3.0
24.6 2000 x1000 x 1.5 112.0 3000 x 1500 x 3.0

 

AISI 304 Shim Sheet Gauge chart

AISI 304 Shim Sheet Gauge chart

 

We Export SS 304 Perforated Sheet and keep Mesh Sheet in stock for our customers. Supplier of ASME SA240 SS 304 Sheet In Mumbai, See 304 SS Plate Weight Calculator/ HSN Code

 

SS 304 Plate Hsn Code

Stainless Steel 304 Plate HS Code Description
73079990 CR 3 MM SS 304 SHEET
73079990 JINDAL SS 304 SHEET
72199090 2MM THICK 304 SS. SHEETS
72192212 6.0MMX1500MMX6000-304/NO1/TRIM EDGE HOT/COLD ROLLED STAINLESS STEEL WIDE SHEETS (HAVING >8%)
72199011 304/2B/TRIM EDGE STAINLESS STEEL HOT/COLD ROLLED WIDE SHEETS (HAVING >8%) 5.0MMX1500MMX6000
72199013 1MMX1250MMX2500 -304/2B/TRIM EDGE COLD ROLLED STAINLESS STEEL WIDE SHEETS(HAVING> 8 %)
72199012 HOT/COLD ROLLED 304/2B/TRIM EDGE STAINLESS STEEL WIDE SHEETS (HAVING >8%) 4.0MMX1500MMX6000
73141490 Size:16X16 0.023 DIA ,4X8 SHEET SS304 WIRE MESH
72199013 1.5MMX1250MMX2500 -304/2B/TRIM EDGE STAINLESS STEEL COLD ROLLED WIDE SHEETS(HAVING >8%)

 

Stainless Steel 304 Plate Sizes

Stainless Steel 304 Plate Sizes

304 SS Sheet Hardness

123 Brinell.

 

SS 304 Plate Weight Calculator

Weight of Stainless Steel 304 Plate

Please enter values then click on Calculate.

Length (inches) =
Width (inches) =
Thickness (inches) =
 
Weight (pounds) =

All weights are estimates; actual weights may differ.

 

Surface Finish of 304h Plate

Polished and Brushed Finishes

DIN Designation ASTM Equivalent
1P-2P No. 7-8
1J-2J No. 4
1G-2G No. 3
1K-2K No. 6

Mill Finishes

DIN Designation ASTM Equivalent
2B No. 2B
2Q
1D No. 1
2H TR
2D No. 2D
2R BA

 

Patterned & Coloured Finishes

ASTM Equivalent DIN Designation Finish
1M Patterned Finish
1S-2S Surface Coating
No. 2D 2F Patterned Finish
2W Patterned Finish
2M Patterned Finish
2L Coloured Finish

 

Stockholder of 304 Stainless Steel Hot and Cold Rolled Plate, Check out the price of Stainless Steel Sheet 304 and understand its density, weight per square metre

 

304 SS Checker Plate Weight Per Square Meter

Checker plates come in a variety of sizes and configurations. This has a significant impact on SS 304 Plate Weight Per Square Meter.

Kg / Square per Metre
Chequer Plate
78.5 10mm x 3600 x 1500
78.5 10mm x 2400 x 1200
40.03 5mm x 3600 x 1500
24.02 3mm x 2400 x 1200
48.04 6mm x 2400 x 1200

to know more refer Stainless Steel 304 Sheet Weight Chart

 

SS 304 Plate Density

density is 8,000 kg/m3.

 

304 2b Stainless Steel Sheet Tolerance Chart

Stainless Steel 304 Sheet Tolerance (mm) Material Stainless Steel 304 Specified Thickness (mm)
± 0.005 Inch | 0.13 Gauge 11 0.120 Inch | 3.05
± 0.005 Inch | 0.127 Gauge 12 0.105 Inch | 2.667
± 0.004 Inch | 0.102 Gauge 14 0.075 Inch | 1.905
± 0.004 Inch | 0.102 Gauge 16 0.059 Inch | 1.499
± 0.003 Inch | 0.076 Gauge 18 0.048 Inch | 1.219
± 0.002 Inch | 0.051 Gauge 20 0.035 Inch | 0.889
± 0.002 Inch | 0.05 Gauge 22 0.031 Inch | 0.79
± 0.002 Inch | 0.05 Gauge 24 0.025 Inch | 0.64

 

SUS 304 Plain And Polished Sheet Sizes

PRODUCT THICKNESS MM FINISH MAX SHEET SIZE MM
Stainless Steel 304 0.9 Plain 2B 2000 x 1000
Brushed Finish 2000 x 1000, 2500 x 1250 0.9, 1.2
Bright 2000 x 1000 0.9
Rimex Super Mirror 2400 x 1200, 2500 x 1250 0.8, 1.2
Embossed 2500 x 1250 0.8, 1.0

 

Mechanical Properties of AISI 304 Shim Sheet

Standard Grade Rp1.0 Rp0.2 Rm Rockwell Elongation HB
MPa MPa MPa %
EN 10028-7 1.4301 ≥ 260 ≥ 230 540-750 ≥ 45
ASTM A312 TYPE 304 ≥ 205 ≥ 515 ≤ 92HRB ≥ 35 ≤ 201
ASTM A240 TYPE 304 ≥ 205 ≥ 515 ≤ 92HRB ≥ 35 ≤ 201
EN 10088-2 1.4301 ≥ 260 ≥ 230 540-750 ≥ 45
EN 10088-4 1.4301 ≥ 260 ≥ 230 540-750 ≥ 45

 

SS Sheet 304 Chemical Composition

Standard Grade Mn N C Cr Ni
EN 10088-4 1.4301 ≤2.0 ≤0.10 ≤0.07 17.5-19.5 8.0-10.5
ASTM A312 TP 304 ≤2.00 ≤0.10 ≤0.08 18.0-20.0 8.0-11
ASTM A240 304 ≤2.00 ≤0.10 ≤0.07 17.5-19.5 8.0-10.5
EN 10088-2 1.4301 ≤2.0 ≤0.10 ≤0.07 17.5-19.5 8.0-10.5
EN 10028-7 1.4301 ≤2.00 ≤0.10 ≤0.07 17.5-19.5 8.0-10.5
EN 10088-3 1.4301 ≤2.00 ≤0.10 ≤0.07 17.5-19.5 8.0-10.5

 

ASTM A240 Gr 304 Equivalent

EU
EN
Germany
DIN,WNr
USA Japan
JIS
China
GB
England
BS
Russia
GOST
X5CrNi18-10 (1.4301) 1.4301
X5CrNi18-9
304 SUS304 0Cr18Ni9 304S15 08KH18N10

 

304 Stainless Plate Physical properties

Grade Elastic Modulus (GPa) Density (kg/m3) Mean Coefficient of Thermal Expansion (μm/m/°C) Thermal Conductivity (W/m.K) Electrical Resistivity (nΩ.m) Specific Heat 0-100°C (J/kg.K)
0-315°C 0-100°C 0-538°C at 500°C at 100°C
Stainless Steel 304 Sheet 193 8000 17.8 17.2 18.4 21.5 16.2 720 500

 

DIN 1.4301 Sheet Thickness and Weight in Inches

DIN 1.4301 Sheet Thickness and Weight in Inches

 

SS 304 Perforated Sheet Sizes

Stainless Steel 304 Perforated round hole and perforated square hole

Round Hole (R)
Square Hole (C)
Pattern Pitch (mm) Hole Size(mm) % Open Area Thickness (mm) Sheet Size
S022 T2.00 R1.00 23 0.80 2m x 1m
S011 T1.50 R0.75 23 0.60 2m x 1m
S028 T2.50 R1.50 33 0.60 2m x 1m
S025 T2.60 R1.50 30 1.00 2m x 1m
S040 T3.50 R2.00 30 1.00 2m x 1m
S038 T3.00 R2.00 40 1.00 2m x 1m
S056 T5.00 R3.00 33 1.00 2m x 1m
S048 T4.00 R2.50 36 0.60 2m x 1m
S064 T5.00 R3.00 33 1.50 2m x 1m
S057 T4.50 R3.00 40 1.20 2m x 1m
S066R T6.00 R3.00 23 3.00 2m x 1m
S065 T5.00 R3.00 33 2.00 2m x 1m
S068 T6.00 R4.00 40 1.50 2m x 1m
S067 T6.00 R4.00 40 1.00 2m x 1m
S072 T8.00 R5.00 35 1.50 2m x 1m
S071 T7.00 R5.00 46 1.00 2m x 1m
S074 T8.00 R5.00 35 3.00 2m x 1m
S073 T8.00 R5.00 35 2.00 2m x 1m
S082 T9.00 R6.00 40 0.60 2m x 1m
S086 T9.00 R6.00 40 1.00 2m x 1m
S076 U8.00 C5.00 39 1.00 2m x 1m
S093 T9.00 R6.00 40 3.00 2m x 1m
S091 T9.00 R6.00 40 1.50 2m x 1m
S095 T12.00 R8.00 40 1.50 2m x 1m
S104 U12.00 C10.00 70 1.00 2m x 1m
S094 U12.00 C8.00 44 1.00 2m x 1m
S106 T15.00 R10.00 40 1.00 2m x 1m
S202 T28.00 R20.00 46 2.00 2m x 1m
S107 T15.00 R10.00 40 1.50 2m x 1m
S105 U12.00 C10.00 70 1.50 2m x 1m
S109 T15.00 R10.00 40 3.00 2m x 1m
S108 T15.00 R10.00 40 2.00 2m x 1m
S155 T21.00 R15.00 46 1.50 2m x 1m

 

304 Stainless Steel Hot Rolled Plate Stock list

Stainless Steel 304 Sheet Size Thickness Estimated Weight per Sheet Stainless Steel 304 Sheet Weight per Unit Area
36 x 120 0.015 inches0.381 mm 18.90 lbs8.5617 kg 0.630 lbs/ft²3.07566 kg/m²
36 x 96 0.015 inches0.381 mm 15.12 lbs6.84936 kg 0.630 lbs/ft²3.07566 kg/m²
36 x 120 0.0178 inches0.45212 mm 22.68 lbs10.27404 kg 0.756 lbs/ft²3.690792 kg/m²
36 x 96 0.0178 inches0.45212 mm 18.15 lbs8.22195 kg 0.756 lbs/ft²3.690792 kg/m²
48 x 120 0.0178 inches0.45212 mm 30.24 lbs13.69872 kg 0.756 lbs/ft²3.690792 kg/m²
30 x 96 0.0235 inches0.5969 mm 20.16 lbs9.13248 kg 1.008 lbs/ft²4.921056 kg/m²
48 x 96 0.0178 inches0.45212 mm 24.19 lbs10.95807 kg 0.756 lbs/ft²3.690792 kg/m²
36 x 96 0.0235 inches0.5969 mm 24.19 lbs10.95807 kg 1.008 lbs/ft²4.921056 kg/m²
36 x 120 0.0235 inches0.5969 mm 30.24 lbs13.69872 kg 1.008 lbs/ft²4.921056 kg/m²
30 x 120 0.0235 inches0.5969 mm 25.20 lbs11.4156 kg 1.008 lbs/ft²4.921056 kg/m²
48 x 96 0.0235 inches0.5969 mm 32.26 lbs14.61378 kg 1.008 lbs/ft²4.921056 kg/m²
48 x 120 0.0235 inches0.5969 mm 40.32 lbs18.26496 kg 1.008 lbs/ft²4.921056 kg/m²
36 x 144 0.0235 inches0.5969 mm 36.29 lbs16.43937 kg 1.008 lbs/ft²4.921056 kg/m²
48 x 144 0.0235 inches0.5969 mm 48.39 lbs21.92067 kg 1.008 lbs/ft²4.921056 kg/m²
30 x 120 0.0291 inches0.73914 mm 31.50 lbs14.2695 kg 1.260 lbs/ft²6.15132 kg/m²
36 x 96 0.0291 inches0.73914 mm 30.24 lbs13.69872 kg 1.260 lbs/ft²6.15132 kg/m²
30 x 96 0.0291 inches0.73914 mm 25.20 lbs11.4156 kg 1.260 lbs/ft²6.15132 kg/m²
36 x 144 0.0291 inches0.73914 mm 45.37 lbs20.55261 kg 1.260 lbs/ft²6.15132 kg/m²
48 x 96 0.0291 inches0.73914 mm 40.32 lbs18.26496 kg 1.260 lbs/ft²6.15132 kg/m²
36 x 120 0.0291 inches0.73914 mm 37.80 lbs17.1234 kg 1.260 lbs/ft²6.15132 kg/m²
48 x 144 0.0291 inches0.73914 mm 60.49 lbs27.40197 kg 1.260 lbs/ft²6.15132 kg/m²
48 x 120 0.0291 inches0.73914 mm 50.41 lbs22.83573 kg 1.260 lbs/ft²6.15132 kg/m²
30 x 120 0.0355 inches0.9017 mm 37.80 lbs17.1234 kg 1.512 lbs/ft²7.381584 kg/m²
30 x 96 0.0355 inches0.9017 mm 30.24 lbs13.69872 kg 1.512 lbs/ft²7.381584 kg/m²
36 x 96 0.0355 inches0.9017 mm 36.29 lbs16.43937 kg 1.512 lbs/ft²7.381584 kg/m²

 

SS Sheet 304 Applications

  •   Chemical processing equipment
  •   Kitchen Equipment
  •   Architectural
  •   Pharmaceutical processing equipment

 

Ready Stock For Immediate Dispatch

304 Stainless Steel Strip SA240 304 Stainless Steel Chequered Plate
304 Stainless Steel Perforated Sheet ASTM A240 Type 304 Shim Sheet
304 Stainless Steel Coil Slitting Polished 304 Stainless Steel sheet
Brushed 304 Stainless Steel Sheet SS Werkstoff No 1.4301 Shims
Jindal 304 Stainless Steel Sheet Zinc Coated 304 Stainless Steel Sheet
Decorative 304 Stainless Steel Sheet 304 Stainless Steel Patterned Sheet
SA 240 type 304 Pattern Elevator Door sheet Cold Rolled 304 Stainless Steel Sheet
ASTM A240 Type 304 gold mirror etching 304 Stainless Steel Bbq Plate
ASTM A240 Type 304 Embossing sheet SA240 Color sheet
304 Stainless Steel Etching Sheet Mirror Etching Elevator Door Sheet
304 Stainless Steel Floor Sheet ASTM A240 Type 304 Laminate Sheet
ASTM A240 Grade 304 Polish sheet SS UNS S30400 Stamped sheet
ASTM A240 Type 304 Mesh Sheet Circle Polished grade 304 Stainless Steel Sheet
Smooth Finish AISI 304 Sheet Brushed Finish grade 304 Stainless Steel Sheet
304 Stainless Steel Corrugated Sheet Bright Annealed ASTM A240 Type 304 Sheet
304 Stainless Steel Expanded Sheet SUS 304 Design Sheet
A240 Grade 304 Thick Steel Plate 304 Stainless Steel Diamond Sheet
ASTM A240 Stainless Steel 304 Flat Strip ASTM A240 Type 304 Foil Sheet
ASTM A240 Grade 304 Checker Plate Embossed 304 Stainless Steel Sheet
AISI 304 Stainless Steel Sheets Jindal 1.4301/304 Stainless Steel Sheets
Stainless Steel Sheets SS304 304 SS Sheet
304 Steel Plate Stainless Steel 304 Sheets
No 8 Mirror Finish 304 Stainless Steel Sheet 304 Stainless Steel Cold Rolled Plates

 

We Have A Huge Inventory Of Stainless Steel 304 Sheet, Buy Online And Save Cost