Tiscral Plate

view Price and Hardness, Supplier of Super thick and high performance Tata Tiscral Plates with prime quality

Tiscral steel is a structural steel grade designed to possess superior strength. A Tiscral Plate is designed with a chemical composition of carbon, silicon, manganese, phosphorous, sulfur, and chromium. The superior Tiscral Plate Chemical Composition gives the components good corrosion and oxidation resistance properties. The content also propels the plate to be tolerant against reducing media across stress-induced environmental conditions.

The Tata Tiscral Plates are designed with a density between 6.6Mg/m3 to 6.75Mg/m3. The versatile plates perform well in high as well as low-temperature setups. They can withstand a wide range of pressures and temperatures while being tolerant to wear and tear in the system.

The Tiscral Sailhard Plates have a robust construction with enhanced ductility. These plates are resistant to atmospheric corrosion and are available in cut sizes to meet different project requirements. The Tiscral High Tensile Structural Steel Plates are designed for use in a wide range of harsh conditions. The higher carbon content in these plates gives them enhanced abrasion resistance, allowing them to withstand extreme drilling and punching across different media.

These plates are commonly seen in construction setups and architectural buildings. Tiscral Plate Hardness is around 200 BHN on average. The robust plates are quenched and tempered in order for the plates to achieve the desired hardness and specific characteristics. The Tiscral Plate Price varies from time to time on various factors from logistics to availability of material. All our products are manufactured in compliance with standards set by different international and national governing bodies.

Our quality assured products are very durable and can be availed across all our outlets. If you still have any more doubts or want to get a quote on these plates, visit any of our outlets or contact us for more information.

check Weight Calculator, Fastest Growing Stockholder and trader of Tiscral High Tensile Structural Steel Plates In India at discounted price

• Thickness: 2.5, 2, 4, 3, 6, 5, 10, 8, 15, 51-80, 12, 25- 32, 18, 45-51, 32-45, 80- 130 mm.
• Width: 1500, 2500 , 1000, 2000, cut widths provided.
• Length: 2500, 6000,  2000, 3000, 4500, 4000, 5000mm, Cut lengths provided.
• Impact tested : -52° C
• Process of Manufacturing : Hot-Rolled (HR)
• Supply Condition:  Normalized Rolling, As Rolled, Furnace Normalizing, Simulated Post-Weld Heat Treatment, Vacuum Degassing or as per customer requirement.

at dealer Price with all specifications as per customer requirement We are Stocking Distributor of Tiscral Sailhard Plates and Sheet

 

Most Popular Types of Tiscral Plates

TISCRAL Plate

Tata TISCRAL Plates

TISCRAL Sailhard Plates

TISCRAL Steel Plate

TISCRAL Structural Steel Plates

TISCRAL Wear Resistant Steel Plates

 

Sizes of Tiscral Sailhard Plates

1mm	2mm	3mm	4mm	6mm	8mm	10mm	12mm	14mm	16mm
20mm	25mm	30mm	32mm	36mm	40mm	45mm	50mm	63mm	70mm
72mm	75mm	80mm	90mm	100mm	110mm	130mm	150mm	170mm	180mm
200mm	230mm	270mm	300mm

 

Tiscral Plate Hardness

Tiscral Plate Hardness is around 200 BHN on average

 

Tiscral High Tensile Structural Steel Plates Testing

Test	Test frequency	According to standard
Ballistic protection	Typical values according to approval tests.	PM2000/EN 1522 Stanag 4569
Brinell hardness test	Each heat treatment individually.	EN ISO 6506-1
Tensile test	Typical values or according to agreement.	EN 10002-1
Charpy impact test	Typical values or according to agreement.	EN 10045-1

 

Tiscral Sailhard Plates Specification

• Thickness: 2mm to 130mm.
• Width: 1000mm to 2500mm or as per customer requirment
• Length: 2000mm to 6000mm or as per customer requirment

 

check Equivalent, Density and Chemical Composition, As exporter and Stockist We have largest independent stock of TISCRAL 200 BHN Steel Plates,

 

Tiscral Plate Density

Tata Tiscral Plates are designed with a density between 6.6Mg/m3 to 6.75Mg/m3. 

 

TISCRAL 200 BHN Steel Plates Grades

• TISCRAL 200 BHN Steel Plates
• SAILHARD Plates
• UTTAM HARD Plates
• 200 BHN Plates
• JSPL HARD Plates

 

Tiscral Sailhard Plates Thickness Tolerances

Upper tolerance mm	Heavy plates Thickness mm	Sheets Thickness mm	Upper tolerance, width-wise mm
			1201 – 1500	-1200
0.74	6.00 – 6.99	2.50 – 3.00	0.32	0.30
0.76	7.00 – 7.99	3.01 – 4.00	0.36	0.32
0.80	8.00 – 9.99	4.01 – 5.00	0.40	0.36
0.90	10.00 – 11.99	5.01 – 6.00	0.42	0.40
1.00	12.00 – 14.99	6.01 – 6.50	0.44	0.44
1.10	15.00 – 19.99
1.20	20.00 – 24.99
1.30	25.00 – 29.99
1.40	30.00

 

Advantages of Tiscral Structural Steel Plates

• Resistance to atmospheric corrosion
• Robust construction
• High ductility

 

if you have any questions about Tiscral Structural Steel Plates and its Properties, Please contact us by email or phone

 

Tata Tiscral Plates Chemical Composition

Grade	P(%) max	Cr(%) min-max	Si(%) min-max	C(%) min-max	Mn(%) min-max	S(%) max
C45	0.025	0.20 to 0.40	0.15 to 0.35	0.42 to 0.50	0.50 to 0.80	0.025

 

Tiscral Sailhard Plate Mechanical Properties

Mechanical Properties	HARDNESS-200 BHN (Min)
CE+	HARDNESS-200 BHN (Avg).TISCRAL | SAIL HARD | 200 bhn steel plate.

 

Tata Tiscral Plates Industrial Application

• Loaders
• Automobile Industries
• Pumps
• Petrochemicals
• Conveyer Belts Plates
• Liner Plates
• Dumber Bodies Plates
• Natural Gas and Oil

 

why triton

• Quality and innovation are important factors.
• There will be no compromise on quality.
• Steel Plate Industry Expertise for Over 20 Years
• Deliveries on time
• Flexibility to fulfil a wide range of needs
• Customization
• Prices that are reasonable
• With a clientele that spans 19 nations, we have the most reputable clientele.
• Members of the team who are knowledgeable and experienced
• Customer service is outstanding.