The most prominent supplier and stockist of a diverse range of S45C (Aisi 1045) Carbon Steel Sheet at reasonable Price, view SAE 1045 vs 1050
Table Of Content
SAE 1045 is a medium tensile and carbon grade. The Sae 1045 Steel Plate is designed with a versatile chemical composition of carbon, iron, manganese, phosphorous, and sulfur. The superior concentration gives the Aisi 1045 Plate good strength and excellent impact resistance properties across normalized or hot rolled conditions.
The versatile Aisi 1045 Steel Sheet has low hardening capacity, and the low alloying elements in this grade don’t respond well to the nitriding process. The s45c (aisi 1045) carbon steel sheet is characterized by good machinability and excellent weldability at different temperatures. The 1045 Plate Suppliers provide this plates in hardness of 163 Brinell. These wear-resistant plates are widely used in gears, shafts, spindles, torsion bars, etc.
Description | Price |
SAE 1045 C45 Cold Rolled Carbon Sheet/Plates | US $ 610-850 / Ton |
3mm Carbon Plate SAE 1045 | US $ 700-800 / Ton |
SAE 1045 Hot Rolled Carbon Ms Plates | US $ 500-800 / Ton |
SAE 1045 Plates | US $ 450-600 / Ton |
AISI/SAE 1045 Hot Rolled Middle Carbon Plates | US $ 500-800 / Ton |
SAE 1045 Hot Rolled Alloy Plates | US $ 500-900 / Ton |
SAE 1045 Hot Rolled Carbon Plate for Construction | US $ 592-660 / Ton |
SAE 1045 Thick Carbon Plates | US $ 520-640 / Ton |
- The SAE 1050 grade is designed to possess a superior carbon concentration than the 1045 grade.
- The SAE 1050 shows higher levels of tensile and yield strength compared to the SAE 1045 grade.
- The 1045 grade possesses better machinability and weldability than the 1050 grade.
Stockholder and Wholesaler of any size of EN8 CS plate you may require applications for long-term fabrication, get Sae 1045 Material Hardness and SAE 1045 vs 4140
Grade | SAE J403 Grade 1045 |
Specification | SAE 1045, ASTM A830 AISI 1045, |
Contact our sales executive in these locations | Canada, USA, UAE, UK, Mexico, Singapore, France, Malaysia, Indonesia, and South Africa |
Condition | hot rolled or normalized |
Heat treated method | By flame or induction |
- SAE 4140 is a molybdenum and chromium grade designed possessing superior corrosion resistance. The SAE 1045 doesn’t have the presence of these Chromoly grades.
- The strength and hardness of the 4140 grade are higher than that of the 4140 grade.
What is Hardness of Sae 1045 Material ?
Hardness is a factor that helps in determining the wear and tear resistance in a grade. The 1045 Steel Plate is designed to possess a superior hardness of 163 Brinell. The hardness value in these versatile Rectangular Aisi 1045 Carbon Steel Plates helps in determining the load-bearing capacity of the modules.
The modules in these grades are hardened following the tempering and through-hardening process. However, only AISI 1045 Medium Carbon Steel Plate of 60mm is recommended for these operations to increase the material hardness.

SAE 1045 Steel Plate

Aisi 1045 Steel Sheet

Aisi 1045 Plate

JIS S45C Carbon Steel Sheet

En8 Carbon Steel Plate

760 Carbon Steel Plate
Thickness | Length x Width |
---|---|
mm | mm |
0.8 | 2500 x 1250 |
0.8 | 2000 x 1000 |
0.9 | 2500 x 1250 |
1.20 | 2000 x 1000 |
0.9 | 2000 x 1000 |
1.0 | 2000 x 1000 |
1.0 | 1830 x 1220 |
1.0 | 2440 x 1220 |
1.20 | 2500 x 1250 |
Physical Properties | Imperial | Metric |
---|---|---|
Density | 0.284 lb/in3 | 7.87 g/cc |
1045 Sheets Component length (mm) | OD 100-254 mm | OD 30-100 mm |
---|---|---|
1200-5000 | + 6.0/- 0 | + 5.0/- 0 |
100-600 | + 3.0/- 0 | + 2.0/- 0 |
10-100 | + 2.0/- 0 | + 1.0/- 0 |
600-1200 | + 4.0/- 0 | + 3.0/- 0 |
Length x Width | Thickness | Mass per Sq m |
---|---|---|
mm | mm | Kg/m2 |
2500 x 1250 | 30.00 | 235.50 |
2000 x 1000 | 30.00 | 235.50 |
4000 x 2000 | 30.00 | 235.50 |
3000 x 1500 | 30.00 | 235.50 |
5000 x 2500 | 30.00 | 235.50 |
5000 x 1250 | 30.00 | 235.50 |
6000 x 2500 | 30.00 | 235.50 |
2000 x 1000 | 32.00 | 251.20 |
10000 x 2500 | 30.00 | 235.50 |
2500 x 1250 | 32.00 | 251.20 |
4000 x 2000 | 32.00 | 251.20 |
3000 x 1500 | 32.00 | 251.20 |
5000 x 2500 | 32.00 | 251.20 |
3000 x 1500 | 35.00 | 274.75 |
2500 x 1250 | 35.00 | 274.75 |
4000 x 2000 | 35.00 | 274.75 |
2500 x 1250 | 40.00 | 314.00 |
2000 x 1000 | 40.00 | 314.00 |
3000 x 1500 | 40.00 | 314.00 |
4000 x 2000 | 40.00 | 314.00 |
4000 x 1750 | 40.00 | 314.00 |
5000 x 2500 | 40.00 | 314.00 |
7500 x 2500 | 40.00 | 314.00 |
6000 x 2000 | 40.00 | 314.00 |
2000 x 1000 | 45.00 | 353.25 |
2500 x 1500 | 45.00 | 353.25 |
2500 x 1250 | 45.00 | 353.25 |
3000 x 1500 | 45.00 | 353.25 |
5000 x 2500 | 45.00 | 353.25 |
4000 x 2000 | 45.00 | 353.25 |
2000 x 1000 | 50.00 | 392.50 |
3000 x 1500 | 50.00 | 392.50 |
4000 x 2000 | 50.00 | 392.50 |
2500 x 1250 | 50.00 | 392.50 |
5000 x 2500 | 50.00 | 392.50 |
8000 x 2500 | 50.00 | 392.50 |
6000 x 2000 | 50.00 | 392.50 |
2000 x 1000 | 60.00 | 471.00 |
3000 x 1500 | 60.00 | 471.00 |
4000 x 2000 | 60.00 | 471.00 |
2500 x 1250 | 60.00 | 471.00 |
5000 x 2500 | 60.00 | 471.00 |
2500 x 1250 | 65.00 | 510.25 |
3000 x 1500 | 65.00 | 510.25 |
2000 x 1000 | 65.00 | 510.25 |
4000 x 2000 | 65.00 | 510.25 |
2000 x 1000 | 70.00 | 549.5 |
2500 x 1250 | 70.00 | 549.5 |
5000 x 2500 | 65.00 | 510.25 |
3000 x 1500 | 70.00 | 549.5 |
5000 x 2500 | 70.00 | 549.5 |
2000 x 1000 | 75.00 | 588.75 |
4000 x 2000 | 70.00 | 549.5 |
2500 x 1250 | 75.00 | 588.75 |
4000 x 2000 | 75.00 | 588.75 |
5000 x 2500 | 75.00 | 588.75 |
3000 x 1500 | 75.00 | 588.75 |
2000 x 1000 | 80.00 | 628.00 |
3000 x 1500 | 80.00 | 628.00 |
2500 x 1250 | 80.00 | 628.00 |
4000 x 2000 | 80.00 | 628.00 |
2500 x 1250 | 90.00 | 706.5 |
2000 x 1000 | 90.00 | 706.5 |
3000 x 1500 | 90.00 | 706.5 |
5000 x 2000 | 90.00 | 706.5 |
2000 x 1000 | 100.00 | 785.00 |
4000 x 2000 | 90.00 | 706.5 |
2500 x 1250 | 100.00 | 785.00 |
4000 x 2000 | 100.00 | 785.00 |
5000 x 2500 | 100.00 | 785.00 |
3000 x 1500 | 100.00 | 785.00 |
There are different types of CK45 carbon steel plate are available like polished, cold rolled and hot rolled plates, and so on in various sizes and Equivalent Grade. check Mechanical Properties
MECHANICAL PROPERTIES | ||
---|---|---|
Imperial | Metric | |
Tensile Strength, Yield | 45,000 PSI | 310 MPa |
Tensile Strength, Ultimate | 81,900 PSI | 565 MPa |
Hardness, Brinell | 163 | 163 |
Modulus of Elasticity | 29,000 KSI | 200 GPa |
Elongation at Break (in 50 mm) | 16.0% | 16.0% |
Poissons Ratio | 0.290 | 0.290 |
Bulk Modulus (Typical for Steel) | 20,300 KSI | 140 GPa |
Shear Modulus | 11,600 KSI | 80 GPa |
SAE 1045 low CS grade is designed with moderate strength. Sae 1045 Equivalent Grade in India is the IS 45C8, C45 grades.
Grade | DIN,WNr | EU EN | AFNOR | JIS | BS | ISO | GOST | UNS |
1045 | Ck45 | C45E (1.1191) | XC45 XC48H1 |
S45C | 080M46 CFS8 |
C45E4 | 45 | G10450 |
- shafts
- pins
- gears
- rams
- axles
- sockets
- spindles
- rolls
- ratchet
- worms
As Dealer and Stocking Distributor of We are prepared to provide you high-quality 760 carbon steel plate with prompt delivery and custom-cut, see Sae 1045 Chemical Composition
Aisi 1045 Steel Plate Properties
Aisi 1045 is a medium carbon grade exhibiting superior machinability and weldability. The versatile grades have a tensile strength of 565mpa with a yield strength of 310mpa and can be readily elongated by 16%. The 1050 grade possesses a hardness of 163 Brinell with a modulus of elasticity of 200GPA. The bulk modulus for the steel is 140GPA with a shear modulus of 80GPA.
S | FE | C | MN | P |
---|---|---|---|---|
≤ 0.050% | 98.51 - 98.98% | 0.420 - 0.50% | 0.60 - 0.90% | ≤ 0.040% |
To satisfy their demands and approaches of Medium Tensile Low Hardenability ASTM A830 AISI 1045 Carbon Steel Plate, we consistently use a customer-friendly strategy. see thickness of Aisi 1045 Plate and Sheet
Aisi 1045 Plate and Sheet Thickness difference
Plates and sheets form an integral part of AISI 1045 grade. ASTM A830 AISI 1045 Plate and 1045 sheets can be distinguished based on certain features.
- The AISI 1045 Carbon plate is designed in thickness above 6mm, extending up to 100mm or more. Sheets are designed in thicknesses below 6mm but above 0.5mm.
- 1045 Hot Rolled Plate is used to provide stability and support to different components. Sheets are utilized in applications that don’t necessarily require to be supported. On the contrary, sheets are weight-saving items that add an aesthetical appeal to the application.