Table Of Content
5454-h32 Aluminum Plate Supplier in India, view Aluminium 5454 Sheet Price
A common rust-proof metal is 5454 aluminium plate. It has roughly the same strength as 5154 aluminium and is about 20% stronger than 5052 aluminium. It is frequently utilised in the industries of autos and aluminium tankers because it can adapt to extreme corrosive conditions.
The 5454 aluminum grade belongs to a wrought alloy grade. A 5454 Aluminum Plate is designed with a high chemical composition of 96.3% of aluminum with a small content of magnesium, chromium, and manganese embedded in the plates. These plates give them good resistance to corrosive and oxidative media in different setups. The 5454 aluminium plate is designed in thickness above 6mm and works well in sub-zero temperatures.
The performance of these alloys in temperatures between 200 to 250 degrees C is very low. The versatile grade of 5454 Aluminium Alloy plate is designed with a density between 2.6 to 2.8 g/cm3 and showcases a melting point of 60 degrees C. The plates showcase excellent mechanical and thermal properties. An Aluminium Alloy 5454 Plate is designed with a tensile strength between 250 to 305mpa and has minimum proof stress of 180mpa.
They have a hardness of 74HB and have an elastic modulus of 70-80gpa with a Poisson’s ratio of 0.33 in the system. The plates have an excellent thermal conductivity of 134 W/mK at 25 degrees C. The robust 5454-h32 aluminum plate has a density of 2.69 g/cm3 with a modulus of elasticity of 70.5GPA with an electrical resistivity of 34% IACS.
The 5454 aluminum sheet is an aesthetically appealing grade that is designed in thickness below 6mm. They are not a feature to provide strength to the module but rather add some glow to the application. Aluminium 5454 Sheet has good weldability and can be welded in place easily. However, soldering and brazing of the sheet are not advisable. These sheets cannot be heat treated and can be hardened via a cold working process. The 5454 h22 aluminum sheet is seen in chemical process plants, marine systems, offshore industries, pressure vessels, boilers, welded structures, and so on.
5454 Aluminum Plates Description | 5454 Aluminum Plates Price |
5454 1200*2400 1000*2000 Checker/Embossed/Tread/Diamond Aluminum Plates for Decoration | US $ 2200-3500 / Ton |
5000 Series Aluminum Al Alloy Plates 5454 | US $ 2600-3100 / Ton |
tanker aluminum plates 5454 | US $ 2000-3000 / Ton |
Diamond Pattern 5454 H32 Aluminium Checkered Plates | US $ 2200-4000 / Ton |
5454 Alloy Aluminum Plates | US $ 2350-2850 / Ton |
7-7.2mm 5454-O Aluminum Plates Used for Tankers Head | US $ 2200-2600 / Ton |
Aluminum Plates for Oil Tanker 5454 | US $ 2900-3000 / Ton |
5454 Aluminum Plates for Construction, Tanker, Marine Use | US $ 1999-2500 / Ton |
Standard | ASTM B209, EN485, EN573 |
---|---|
Equivalents of AA 5454 | ISO AlMg3Mn, UNS A95454, Aluminum 5454, Al5454, AA5454 |
Type | Cold Rolled, Hot Rolled, Mirror Finish Sheets, Plain Aluminum Sheets, Diamond Pattern Plates, Checkered Plates |
Size | -Cut to Size Sheets & Plates Available On Request |
Temper | -H22, H112, O, H12, H14, H111, H24, F Annealing – F, O |
Finish | Polished, Mill Finish, Close Tolerance Polished Plates and Sheets |
Manufacture Technology | Continuous Casting (CC), Direct Casting (DC), |
Brand | China, India,European Origin, US |
5454 Aluminum Sheet Stockist, we supply custom size 5454 H22 Aluminum Sheet, Don't spend extra for size

5454 Aluminum Plate

5454-H32 Aluminum Plate

5454 H22 Aluminum Sheet

Aluminium 5454 Sheet

Aluminium Alloy 5454 Plate

5454 Aluminium Plate
- H32 - Rolling hardened the work, which was subsequently stabilised with a low-temperature heat treatment to make it quarter hard.
- H22 - Rolling hardened the work, which was subsequently annealed to quarter hardness.
- O - Soft
- H111 - Work hardening is given by shaping operations, although it is less than that necessary for the H11 temper.
Physical Property | Value |
---|---|
Melting Point | 645 °C |
Density | 2.69 g/cm³ |
Electrical Resistivity | 34 % I |
Modulus of Elasticity | 70.5 GPa |
Thermal Expansion | 23.6 x10^-6 /K |
Thermal Conductivity | 135 W/m.K |
- ISO Al Mg3MN
- A5454
- Al 2.7Mg 0.8Mn Cr
Alloy |
Temper |
Thickness |
Width |
Length |
5454 |
H16, O, H36, H116, H14, H114, H24, H12, H112, H38, H32, F, H321, H22, H111, H34, H28, H26, H18,H19 |
0.3-600 |
20-2650 |
500-16000 |
5454 Aluminium Plate Distributors, Check specification & Thickness of Aluminium Alloy 5454 Plate Ex Mumbai
Size | Thickness | Width |
---|---|---|
72 x Coil | 0.313 inches 7.9502 mm | 72 |
63 x Coil | 0.25 inches 6.3500 mm | 63 |
48 x Coil | 0.25 inches 6.3500 mm | 48 |
72 x Coil | 0.25 inches 6.3500 mm | 72 |
67 x Coil | 0.25 inches 6.3500 mm | 67 |
96 x Coil | 0.25 inches 6.3500 mm | 96 |
Keep 5454 Aluminium Alloy Plate stock with custom size at factory price, view 5454 Sheet Dimensions
WIDTH IN INCHES | APPROX. WT. PER SQ. FT. IN LBS. | DECIMAL THICKNESS IN INCHES | LENGTH IN INCHES | APPROX. WT. PER PLATE IN LBS. |
---|---|---|---|---|
60 | 3.492 | .250 | 360 | 523.80 |
60 | 3.492 | .250 | Coil | 523.80 |
72 | 3.492 | .250 | Coil | 523.80 |
80.875 | 3.492 | .250 | Coil | 523.80 |
82 | 3.492 | .250 | Coil | 523.80 |
84 | 3.492 | .250 | Coil | 523.80 |
90 | 3.492 | .250 | Coil | 523.80 |
92 | 3.492 | .250 | Coil | 523.80 |
60 | 4.372 | .313 | Coil | 523.80 |
84 | 5.238 | .375 | 240 | 715.88 |
60 | 5.238 | .375 | Coil | 715.88 |
83.75 | 5.238 | .375 | Coil | 715.88 |
86.375 | 5.238 | .375 | Coil | 715.88 |
84 | 6.984 | .500 | 240 | 977.76 |
Alloy 5454 BS EN 573-3:2009 |
|
---|---|
Chemical Element | % Present |
Iron (Fe) | 0.0 - 0.40 |
Manganese (Mn) | 0.50 - 1.00 |
Silicon (Si) | 0.0 - 0.25 |
Magnesium (Mg) | 2.40 - 3.00 |
Chromium (Cr) | 0.05 - 0.20 |
Zinc (Zn) | 0.0 - 0.25 |
Aluminium (Al) | Balance |
Titanium (Ti) | 0.0 - 0.20 |
Other (Each) | 0.0 - 0.05 |
Copper (Cu) | 0.0 - 0.10 |
Others (Total) | 0.0 - 0.15 |
BS EN 485-2:2008 0.2mm to 6.0mm thick Sheet - |
|
---|---|
Mechanical Property | Value |
Tensile Strength | 250 - 305 MPa |
Proof Stress | 180 Min MPa |
Hardness Brinell | 74 HB |
GERMANY (DIN) | European Standard | ISO | WNr | OLD | UNS | USA (AA) |
---|---|---|---|---|---|---|
AlMg4Mn | AW-AlMg4 | AlMg4 | 3.3537 | AG4MC | A95454 | 5454 |
buy Cut Lengths of Aluminium 5454 Sheet with Mill Test Certificate from manufacturer in india
- Pressure Vessels, Containers, Boilers
- Marine & Off-shore incl. Masts,
- Process and Cemical Plant
- Road Transport Body-Building
- Pylons, poles & masts
- Cryogenics