Table Of Content
Aluminium 7075 T6 Plate Supplier in india at dealer price Ex Mumbai
The 7075 grade is an aluminium alloy designed with zinc as its primary alloy. The 7075 Aluminum Plate also has silicon, iron, copper, manganese, magnesium, chromium, and a few other elements as chemical components. These plates possess superior strength and provide stability to different applications. Designed in thickness above 6mm, the 7075 Aluminium Plate has moderate corrosion resistance properties. The workability and machinability of the modules are low.
Welding and brazing of these plates are also considerably difficult. The Aluminium 7075 Plate has a density of 2.810 g/cm3 with an ultimate tensile strength of 572mpa with a shear strength of 331mpa. The fatigue strength of these plates is 159mpa with a modulus of elasticity of 71.7Gpa with a shear modulus of 26.9Gpa. Aluminium 7075 T6 Plate is a temper attained grade that is achieved as the cast is homogenized at 450 degrees for several hours and quenched after aging at 120 degrees C for at least 24 hours.
This yields the peak strength of the 7075 T6 Aluminum Plate. The yield strength of these plates is mainly derived from dispersed eta and eta precipitated along the grain boundaries or within the grains. The 7075-t651 Aluminum Plate mechanical properties depend on the material used in producing the grade. Thicker plates may have lower strength and elongation compared to thinner components. We are the 7075 Aluminum Plate Suppliers who believe in quality over anything. Our products are produced by the best technicians using the best raw materials and latest technology.
The 7075 Aluminum Sheet is designed with a thickness of less than 6mm and is not preferred in applications that require strength and stability. They are aesthetically appealing components that add a glow to different applications. The temper in the 7075t6 Aluminum Sheet allows it to be customized in different sizes and shapes as per customer requirements.
If you need 7075 Aluminum Sheet We can supply in nearly any size, no matter how small the size or quantity.
Specification |
ASTM B209 / ASME SB209 |
| Thickness | 0.2~300mm |
| Length | 500~10000mm |
| Width | 500~2500mm |
| Finish | Mill, Customer specific finish |
| Type | CR /HR Sheet / Strips/ Plates/ Chequered Plates/Coils |
| Description | Price |
| T6 7075 Aluminum Plates | US $ 1900-2400 / Ton |
| Mirror and Checker Aluminum Alloy Plates 7075 | US $ 1500-3000 / Kg |
| 7075 Ultra-Thick Aluminium Plates for Aerospace and Marine | US $ 1-10 / Piece |
| Hot Rolled/Cold Rolled 7075 Cutting Aluminum Plates | US $ 2500-3000 / Ton |
| 7075 Alloy Aluminium Checkered Plates | US $ 2000-4500 / Ton |
| 7075 Color Embossed Aluminium Plates | US $ 1800-2600 / Ton |
| Thick Aluminum Plates 7075 | US $ 2400 / Ton |
| 7075 for Aluminium Alloy Flat Plates | US $ 2.99-3.39 / Piece |
| 7075 Aluminum Sheet | US $ 3440-3567 / Ton |
| Tolerances | Width: ‘+.25 TO +.3125 WIDTH AND THICKNESS DEPEND Thickness: ‘+/-.012 TO +/-.160 ON THICKNESS DEPEND Length: ‘+.25 TO +.5 ON LENGTH AND THICKNESS DEPENDING |
7075 Aluminum Plates
Aluminium 7075 T6 Plates
7075 Aluminum Sheet
7075-T651 Aluminum Plates
Aluminium 7075 Plates
7050 T7451 Aluminium Plates
| Thickness | Length | Width | Weight (lbs/ft) |
| 3/4" | 144.50" | 48.50" | 10.909 |
| 3/8" | 144.50" | 48.50" | 5.450 |
| 1-1/4" | 144.50" | 48.50" | 18.180 |
| 1" | 144.50" | 48.50" | 14.540 |
| 1-1/2" | 144.50" | 48.50" | 21.777 |
| 2" | 144.50" | 48.50" | 29.089 |
| 1-3/4" | 144.50" | 48.50" | 25.451 |
| 3" | 144.50" | 48.50" | 43.631 |
| 2-1/2" | 144.50" | 48.50" | 36.360 |
| 4" | 144.50" | 48.50" | 58.180 |
| 3-1/2" | 144.50" | 48.50" | 50.890 |
| 6" | 144.50" | 48.50" | 87.260 |
As Stockist we have a large inventory of 7075-t651 Aluminum Plate in almost all length and thickness, call us to know more about Ready stock and updated price list
| Description | Temper | DFARS | Thickness | Specification |
|---|---|---|---|---|
| 7050 T7451 DEFAULT SMO .2500 x 48.0000 x VAR | T7451 | No | VAR | |
| 7075 T7351 DEFAULT SMO .2500 x 48.0000 x VAR | T7351 | No | VAR | |
| 7075T651 ALUM PLT .3750 | T651 | Yes | 0.3750 | AMS4045 ASTM B209 |
| 7075T7351 ALUM PLT .375 | T7351 | Yes | 0.3750 | CMMP 025 AMS4078 |
| 7075T651 ALUM PLT .5000 | T651 | Yes | 0.5000 | AMS4045 ASTM B209 |
| 7075T651 ALUM PLT .500 | T651 | No | 0.5000 | AMS4045 ASTM B209 |
| 7075T651 ALUM PLT .5000 | T651 | No | 0.5000 | AMS4045 ASTM B209 |
| 7075T651 ALUM PLT 2.0000 | T651 | No | 2.0000 | AMS4045 ASTM B209 |
| 7075 T7351 AMS 4078 2.0000 x 48.5000 x 48.5 | T7351 | Yes | 2.0000 | BSS 7055 CMMP 025 |
| 7075 T651 AMS-QQA-250/12 3.5000 x 60.5000 x 60.5 | T651 | No | 3.5000 | BSS 7055 AMS4045 |
| Thickness | Size |
| 0.313 inches7.9502 mm | 48.5 x 144.5 |
| 0.25 inches6.3500 mm | 48.5 x 144.5 |
| 0.500 inches12.7 mm | 48.5 x 144.5 |
| 0.375 inches9.5250 mm | 48.5 x 144.5 |
| 1.000 inches25.4 mm | 48.5 x 144.5 |
| 0.750 inches19.05 mm | 48.5 x 144.5 |
| 1.250 inches31.75 mm | 48.5 x 144.5 |
| 1.750 inches44.45 mm | 48.5 x 144.5 |
| 1.500 inches38.1 mm | 48.5 x 144.5 |
| 2.000 inches50.8 mm | 48.5 x 144.5 |
| 3.000 inches76.2 mm | 48.5 x 144.5 |
| 2.500 inches63.5 mm | 48.5 x 144.5 |
| 3.500 inches88.9 mm | 48.5 x 144.5 |
| 5.000 inches127 mm | 48.5 x 144.5 |
| 4.000 inches101.6 mm | 48.5 x 144.5 |
| 6.000 inches152.4 mm | 48.5 x 144.5 |
| Imperial | Metric | |
| Density | 0.102 lb/in3 | 2.81 g/cc |
| Melting Point | 890 - 1,175°F | 477 - 635°C |
7075 T6 Aluminum Plates available for online order, buy 7075 Aluminium Plate as per international standards & specifications
- Air-frame structures
- Aerospace components
- Highly stressed aircraft parts
| Element | Percentage |
| Al | 90 |
| Cr | 0.18 - 0.28 |
| Cu | 1.2 - 2 |
| Fe | 0.5 max |
| Mg | 2.1 - 2.9 |
| Mn | 0.3 max |
| Si | 0.4 max |
| Ti | 0.2 max |
| Zn | 5.1 - 6.1 |
| Zn + Ti | 0.25 max |
Imperial |
Metric | |
| Density | 0.102 lb/in3 | 2.81 g/cc |
| Ultimate Tensile Strength | 83,000psi | 572 MPa |
| Yield Tensile Strength | 73,000psi | 503 MPa |
| Fatigue Strength | 23,000psi | 159 MPa |
| Shear Strength | 48,000psi | 331 MPa |
| Melting Point | 890 - 1,175°F | 477 - 635°C |
| Temper | T651 |
| Hardness Rockwell | B87 |
| Hardness Brinell | 150 |
| UNS | EN | DIN,WNr | JIS | AFNOR | ISO | BS | GOST |
| A97075 | ENAW-AlZn5.5MgCu EN AW-7075 |
3.4365 AlZnMgCu1.5 |
7075 | 7075 A-Z5GU | AlZn6MgCu | 7075 L95 L96 | V95 |
- Comperable strength to many steels
- Average machinability
- Good fatigue strength
- Typically less corrosion resistant than other alloys
We Keep Bulk Stock of 7075t6 Aluminum Sheet at our stockyard, contact us for Free Sample & stock list
|
|