We are a popular 4140 Steel Sheet Stockist in india and through a worldwide network, view Aisi 4140 Annealed Plate Stock
Table Of Content
4140 grade of steels is a chromium, molybdenum alloy. The 4140 steel plate is low AS designed for excellent corrosion resistance properties. These plates show excellent strength to weight ratio in the system. Aisi 4140 Plates or Chromoly steel exhibits enhanced fatigue strength with good impact and abrasion resistance in stress-induced systems.
The 4140 Plate has exceptional toughness with excellent torsional strength. These plates exhibit an excellent melting point of 1416 degrees C. Designed with enhanced ductility, the 4140 Alloy Steel Plate can be easily formed following standard procedures in annealed conditions. The versatile modules of the 4140 Steel Sheet can be welded using factory welding procedures. If they are heat treated after the welding procedures their mechanical performance will be affected.
Stockholder of EN19 Pre Hard Plate in any size you may require by following all standards and specifications , view 4140 vs 4340
Steels is available in different grades. 4140 and 4340 are amongst the commonly used grades of steel. Both these modules have contrasting properties and features.
- 4140 and 4340 have similar traces of sulfur, phosphorus, silicon and molybdenum, and manganese. The carbon content in the 4340 grade is higher, but the content of chromium in the 4140 grade is higher. The major differentiating factor is the presence of nickel in the 4340 grade giving it excellent tolerances in stress-induced systems.
- The tensile and yield strengths of the 4340 grades are higher than the 4140 grade giving the 4340 grades enhanced strength and performance.
|Specification||UNS G41400, ASTM A829, 1.7225, SCM440, 42CrMo4, EN19|
|Width||200 to 2000 mm|
||6 to 800 mm|
|Length||2000 to 6000 mm|
|SAE 4140 Steel Plates||US $ 588-618 / Ton|
|AISI 4140 Low Alloy High Tensile Plates||US $ 600-800 / Ton|
|4140 Black Surface Flats Plates||US $ 600-800 / Ton|
|4140 Steel Sheet||US $ 780-800 / Ton|
|High Yield Strength 4140 3mm Plates for Building Material||US $ 600-1000 / Ton|
|4140 Low Alloy High Strength Plates||US $ 411-612 / Ton|
|4140 Cold Rolled Steel Carbon Plates||US $ 610-1000 / Ton|
|4140 Cold Rolled Alloy Plates for Tool Steel Bar||US $ 330 / Piece|
|Hot Rolled Preharden SAE 4140 Alloy Plates||US $ 800-1000 / Ton|
4140 Steel Plates
4140 Steel Sheet
4140 Alloy Steel Plates
4140 Annealed Plates
4140 Ht Plates
4140 Pre Hard Plates
As Stocking Distributor offer a broad range of Aisi 4140 Ht Plate for Sale at dealer price in india, check 42CrMo4 Steel Plate Sizes and Thicknesses and view 4140 vs 1045
- 4140 is designed to possess a tensile and yield strength of 655mpa and 415mpa, respectively. 1045 grade is designed with a tensile and yield strength of 565mpa and 310mpa, respectively. This gives the 4140 higher strength than the 1045 grade.
- 1045 is designed with a chemical composition of carbon, iron, manganese, phosphorus, and sulfur. 4140 grade is designed with a chemical composition of chromium, manganese, carbon, silicon, molybdenum, sulfur, phosphorus, and iron. The content of molybdenum and chromium gives the 4140 enhanced corrosion resistance over the 1045 grade.
What is exactly 4140 Steel Plate Thicknesses?
The thickness of a plates influences the weight as well as the strength of the plates. The thickness of the 4140 Plate Stock starts above 6mm and can extend to 100mm or more depending on the requirements of the application. The 4140 Annealed Plates is treated after the initial rolling stage. Plates are generally annealed to increase their ductility to reduce the material's hardness.
4140 Pre Hard Plate is heated to achieve a medium hardness between 28 to 32 HRC. These plates have a thickness between ¼ to 12mm. The 4140 Prehard Plate can be hot rolled or turned with the ground and round polished components having high structural strength. The thickness of the 4140 Ht Plates affects the mechanical properties and the welding capacities of a plates.
|AS ROLLED||36" to 96"||1/4" to 6"||UP TO 240"|
|HEAT TREATED||36" to 96"||1/4" to 6"||UP TO 240"|
|4140||Prehard, Hot rolled, black surface||Plates||2240||13.3||7270||1700.21||1||31.8|
|Plus or Minus 1/4"||12"x18" Plate||15.2928 lbs|
|Plus or Minus 1/4"||12"x12" Plate||
|Plus or Minus 1/4"||12"x24" Plate||20.3904 lbs|
We are importer and exporter of 4140 alloy steel plate, so We keep it in good enough Quantity that the buyer's urgent needs can be met quickly, see Equivalent, Heat Treatment Temperature, Properties
- Tempering: Rapid Cooling 530~630℃
- Normalization: Air Cooling 830~880℃
- Annealing: Furnace Cooling 830℃
- Hardening: Oil Cooling 830~880℃
- machinery parts
||1/4 Inch- 14Inch||.70/1.00||.15/.25||.36/.44||.15/.40||0.035||.80/1.15||0.04||-|
|Yield Strength||60,200 PSI||415 MPa|
|Tensile Strength||95,000 PSI||655 MPa|
|Machinability (set to AISI 1212 as 100 Machinable)||65||65|
|Shear Modulus||11,600 KSI||80 GPa|
|Bulk Modulus||20,300 KSI||140 GPa|
|Elastic Modulus||26,557 - 30,458 KSI||190 - 210 GPa|
|Elongation at Break (50mm)||25.7%||25.7%|
|Poisson's Ratio||0.37 - 0.30||0.27 - 0.30|
- Hardness Brinell: 197
- Poissons Ratio: 0.29
- Density: 0.284 lb/in3
- Melting point: 2580°F
- Tensile strength : 95000 psi
- Elastic modulus: 27557-30458 ksi
- Yield strength: 60200 psi
Know About 4140 Steel Plate Equivalent
The equivalent 4140 plates is 1.7225, 42CrMo4, 42CD4, 2244 and SCM440.
4140 Steel Heat Treatment Temperature
4140 is heat-treated in temperatures of 1550 degrees F. The process is followed by quenching in oil before it is hardened. The steels can also be normalized by heating at temperatures of 913 degrees C for long periods, followed by air cooling.
4140 Steel Properties
4140 is a chromium, molybdenum, and manganese-containing low-grade AS. The 4140 Steel Plate Mechanical Properties allow these modules to exhibit a tensile strength of minimum 655mpa with a yield strength of 415mpa. Designed with a bulk modulus of 140 Gpa, the Aisi 4140 Alloy Steel Plates have an elongation at a break of 25.70%. These modules possess a Brinell hardness of 197 with an elastic modulus between 190-210GPA. The 4140 Steel Plate exhibits a thermal conductivity of 42.6 W/mk at 100 degrees C.
4140 Plate Supplier, Stockist of Larger area SCM440/EN19/ASSAB 709 Plates, ranging from 6000 x 2000mm to 12000 x 3000mm, are also available on request.
- Weldability: Moderate
- Machinability: Moderate
- Fatigue Resistance: Good