SAILMA 350 HI Plate

Sailma 350 High Tensile Structural Steel Plates Supplier in India, view Sailma 350 Plate Price

Salima 350 HI is a high-strength Indian structural steel grade. The SAILMA 350 HI Plate is designed with a superior chemical composition of carbon, manganese, sulfur, phosphorous, and silicon. The content gives them moderate corrosion resistance properties across a wide spectrum of environments. Sailma 350HI Plates are lightweight components that can hold heavy loads of weight. These steel plates have excellent welding and brazing properties.

They can be easily drawn due to their slight drawing stress. Apart from this, they have a précised dimension and require low levels of maintenance. The Sailma 350 Plate is abrasion-resistant steel that can be produced in a hot or cold rolling process. These plates have a thickness of 6mm up to 150mm. They have widths above 1000mm to 4500mm with lengths up to 18000mm. Robust Sailma 350 Steel Plates have a minimum impact strength of 40J at 0 degrees C. These plates are available in soft, hard, half-hard quarter hard, or spring hard hardness. They can be customized in different sizes and shapes as per project requirements.

The versatile Sailma 350 High Tensile Structural Steel Plates are designed with a minimum yield strength of 350mpa with a tensile strength between 490 to 610mpa. These plates can be easily elongated by 21% in the system. This SAILMA 350HI High Tensile Steel Plate has enhanced strength and superior load-bearing capacity across difficult environments. These plates are commonly seen in machine building, framework structures, containers, pylons, lifting and mobile equipment, construction of bridges, etc.

• Width : 1000-4500mm
• Thickness : 5-150mm
• Length : 3000-18000mm

SAILMA 350 HI Plates

Sailma 350 High Tensile Structural Steel Plates

Sailma 350 Plates

Sailma 350 Steel Plates

SAILMA 350HI High Tensile Steel Plates

Sailma 350HI Plates

 

Sailma 350HI Plates Stockist, we supply custom size Sailma 350 Steel Plates, Don't spend extra for size

 

Sizes of Sailma 350 High Tensile Structural Steel Plates

2mm	63mm
1mm	50mm
3mm	70mm
6mm	75mm
45mm	300mm
4mm	72mm
12mm	100mm
8mm	80mm
14mm	110mm
10mm	90mm
16mm	130mm
25mm	170mm
20mm	150mm
30mm	180mm
36mm	230mm
32mm	200mm
40mm	270mm

 

SAILMA 350HI High Tensile Steel Plate Distributors, Check specification & Thickness Ex Mumbai

 

Sailma 350 Steel Plates Chemical Composition

Grade	Deoxidation	Si max %	Nb + V + Ti max %	C max %	P max %	AL min %	Mn max %	S Max %
350HI	Killed	0.40	0.2	0.25	0.055	0.01	1.50	0.055
350	Killed	0.40	0.2	0.25	0.055	0.01	1.50	0.055

 

Mechanical Properties of SAILMA 350 HI Plate

Grade	Tensile Strength MPa	Yield strength MPa	Elongation
350HI	490 – 610	350 min	21
350	490 – 610	350 min	20

 

Keep Sailma High Tensile Structural Steel Plates stock with custom size at factory price, view Sailma 350 Plates Equivalent

 

Sailma 350 Steel Plates Equivalent grade

SAIL (INDIAN)	SEW 092:1990	EN 10025	IS 8500	EN 10149-2	DIN
350HI	-	ST 52.3	FE 490 B	S355MC	1.0976

 

buy Cut Lengths of SAILMA 350 HI Plate with Mill Test Certificate from manufacturer in india

 

SAILMA 350HI High Tensile Plate Applications

• Construction of buildings and bridges.
• Containers.
• Boilers.
• Auto parts and vehicles.
• Construction of Elevators.
• Machine Fabrication.

 

Stocking Distributors of below

ESSAR	JINDAL	WELSPUN	SAIL
POSCO	ARCELOR MITAL	DILLINGER

 

SAILMA 350HI Plates Thickness Tolerance

		Gage No.	Decimal Equiv., Inch	Tolerance Range, Inch.
HRS	Hot Rolled	Gage 4	0.2242 Inch	0.2152 - 0.2332 Inch
HRS	Hot Rolled	Gage 5	0.2092 Inch	0.2002 - 0.2182 Inch
HRS	Hot Rolled	Gage 6	0.1943 Inch	0.1853 - 0.2033 Inch
HRS	Hot Rolled	Gage 7	0.1793 Inch	0.1713 - 0.1873 Inch
HRS	Hot Rolled	Gage 8	0.1644 Inch	0.1564 - 0.1724 Inch
HRS	Hot Rolled	Gage 9	0.1495 Inch	0.1415 - 0.1575 Inch
HRS	Hot Rolled	Gage 10	0.1345 Inch	0.1265 - 0.1425 Inch
HRS	Hot Rolled	Gage 11	0.1196 Inch	0.1116 - 0.1276 Inch
HRS	Hot Rolled	Gage 12	0.1046 Inch	0.0966 - 0.1126 Inch
HRS	Hot Rolled	Gage 13	0.0897 Inch	0.0827 - 0.0967 Inch
HRS	Hot Rolled	Gage 14	0.0747 Inch	0.0677 - 0.0817 Inch
HRS	Hot Rolled	Gage 15	0.0673 Inch	0.0613 - 0.0733 Inch
HRS	Hot Rolled	Gage 16	0.0598 Inch	0.0538 - 0.0658 Inch
HRS	Hot Rolled	Gage 17	0.0538 Inch	0.0478 - 0.0598 Inch
HRS	Hot Rolled	Gage 18	0.0478 Inch	0.0428 - 0.0528 Inch