Hastelloy C22 Plate

What is Hastelloy C22 Plates?

The high content of chromium, molybdenum and significant content of tungsten added to this nickel based alloy gives it exceptional resistance to seawater and brine solutions.

 

Hastelloy C22 Plates

Hastelloy C22 Plate

 Nickel Alloy C22 Sheet

Nickel Alloy C22 Sheet

UNS N06022 Strip

UNS N06022 Strip

Furthermore, this austenitic alloy also has an enhanced resistance to not only pitting and crevice corrosion but also to stress corrosion cracking. Due to a lower content of carbon, the Alloy C22 has good weldable properties and the alloy is not prone to decay after being welded. Which is why Hastelloy C22 sheets or plates can be used in an as-welded condition.

The Rockwell hardness of this alloy is valued at 95 for plates and 93 for sheets. Whereas the yield strength of Hastelloy C22 at 0.2% Offset is about 45000 Psi, with its melting point at a temperature of 1399 °C. To get the best quote for Werkstoff Nr. 2.4602 plate, coil, sheet and strip

What is ASTM B575 UNS N06022 Sheet?

Designed with the sole intention to be used in general corrosive applications, the Hastelloy C22 plates, sheet and strip produced under this specification are to conform to certain requirements. According to specification ASTM B575, the components are to conform to the low carbon chemistry in addition to the dimensions in addition to the mechanical requirements. The mechanical properties covered under this specification include elongation, tensile strength, yield strength and Rockwell hardness. Sheet and strip manufactured from UNS N06022 are to conform to the required grain sizes.

 

Equivalent Standard Of JIS NW 6022 Hot Rolled Plates

STANDARD UNS WNR Material Number AFNOR EN JIS BS GOST
Hastelloy C22 N06022 2.4602 NiCr21Mo14W NW 6022

 

Spec Chart Of Hastelloy C22 Plates

ASTM Standard ASTM B575 / ASME SB575
Thickness of standard sheet 0.1mm to 12 mm Thk
Size of Alloy C22 Plate
1220 mm x 2440 mm, 1000 mm x 2000 mm, 2000 mm x 4000 mm, 2000 mm x 2000 mm, 1500 mm x 3000 mm
Types of Surface Finish Cold rolled sheet (CR), 2D, 2B, SATIN, BA NO(8), Hot rolled plates (HR)
Form of Plates Coils, Rolls, Flats, Strip, Foils, Ring (Flange), Blank (Circle), Shim Sheet, Plain Sheet
Supply plates in Hardness Quarter Hard, Half Hard, Hard, Spring Hard, Soft etc

 

Chemical Composition Standard Of Werkstoff No 2.4602 Coils

Hastelloy C22 Ni C Mo Mn Si Fe P S Co Cr
Balance 0.010 max 12.5 – 14.5 0.50 max 0.08 max 2 – 6 0.02 max 0.02 max 2.5 max 20 – 22.5

 

Mechanical Analysis Of ASTM B575 UNS N06022 Strips

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.69 g/cm3 1399 °C (2550 °F) Psi – 45000 , MPa – 310 Psi – 1,00,000 , MPa – 690 45 %

 

Hastelloy C22 Plates Inventory Size Ranges

Hastelloy C22 Plate

1220 mm x 2440 mm, 1000 mm x 2000 mm, 2000 mm x 4000 mm, 2000 mm x 2000 mm, 1500 mm x 3000 mm

 

We Can Supply With Customized Thicknesses And Sizes Of Hastelloy C22 Plate