Inconel 800 Plate

What is Incoloy / Inconel 800 Plates?

Widely used in equipment that must have high tensile strength as well as good resistance properties to oxidation and carburisation, the Werkstoff Nr. 1.4876 is able to resist other harmful effects of exposure to elevated temperature.

 

Inconel 800 plates

Inconel 800 plate

Alloy 800HT Sheet

Alloy 800HT Sheet

UNS N08800 Coil

UNS N08800 Coil


In fact, Inconel 800 could be used in applications involving seawater or marine engineering purposes. This is possible owing to the fact that the UNS N08800 is free from not only chloride stress related corrosion cracking but also from intergranular corrosion, which in turn is caused by sensitisation.

In an annealed condition the Rockwell hardness value of Inconel 800 is 70. The alloy has a melting range between a temperature of 1357°C to 1385°C. In a cold Worked, annealed condition, the yield strength of Inconel 800 is 205 Mpa, whereas, in a hot finished annealed condition, its yield strength is about 170 Mpa. Similar to most Inconel alloys, Incoloy 800 has high impact strength at high temperatures and continues to have good toughness at cryogenic temperatures. Most of its corrosion resistance properties have been attributed to the addition of 30% to 35% of nickel in the alloy of UNS No 8800.

What is ASTM B424 UNS N08800 Sheet?

The ASTM B424 is a specification which covers the chemical as well as mechanical property requirements for the production of plates, sheets, and strips from Alloy 800. You can find the price list for alloy 800 Plate, Sheet, Coil, Strips

 

Inconel 800 Plate Standard Specifications

ASTM Standards ASTM B409 / ASME SB 409
Sizes Metric 1220 mm x 2440 mm, 1000 mm x 2000 mm, 2000 mm x 4000 mm, 2000 mm x 2000 mm, 1500 mm x 3000 mm
Range of Thickness 0.1 to 12 mm Thick
Standard Form Coils, Rolls, Flats, Strip, Foils, Ring (Flange), Shim Sheet, Blank (Circle), Plain Sheet
Roughness and Surface Finish 2B, BA NO(8), Hot rolled plates (HR), SATIN (Met with Plastic Coated), 2D, Cold rolled sheet (CR)
Hardness Available Quarter Hard, Hard, Spring Hard, Half Hard, Softetc.

 

Incoloy UNS N08800 Sheet Sizes In Stock

Incoloy 800 Plate

1220 mm x 2440 mm, 1000 mm x 2000 mm, 2000 mm x 4000 mm, 2000 mm x 2000 mm, 1500 mm x 3000 mm

 

DIN 1.4876 Hot Rolled Plates Material Equivalent Properties

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 800 1.4876 N08800 NCF 800 NA 15 ЭИ670 Z8NC32-21 X10NiCrAlTi32-20 XH32T
Incoloy 800H 1.4958 / 1.4876 N08810 NCF 800H NA 15(H) ЭИ670 Z8NC33-21 X5NiCrAlTi31-20 XH32T
Incoloy 800HT 1.4859 / 1.4876 N08811 NCF 800HT NA 15(HT) ЭИ670 X8NiCrAlTi32-21 XH32T

 

Mechanical Characteristics Of ASTM B409 Incoloy 800HT Sheet

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
800 / 800H / 800HT 7.94 g/cm3 1385 °C (2525 °F) Psi – 75,000 , MPa – 520 Psi – 30,000 , MPa – 205 30 %

 

Chemical Composition Of UNS N08800 Shim Sheet

Grade C Mn Si S Cu Fe Ni Cr Al Ti
800 0.10 max 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
800H 0.05 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
800HT 0.06 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60ᴬ 0.15 – 0.60ᴬ

 

We Offer Inconel 800 Plate Almost Any Size Or Quantity