Incoloy 800ht Plate

Incoloy 800HT Plate are high-performance superalloys. The Incoloy 800ht Plate is designed with a superior chemical composition of 30-35% nickel, 19-23% chromium, and iron content above 39.5%. The Alloy 800ht Plate is stabilized by titanium and offers excellent creep strength in temperatures ranging up to 1290 degrees F.

If a selected application has frequent temperature excursions below this temperature, the Incoloy 800h Plate should be utilized in the system. Similar to the 800ht, these plates remain stable in high-temperature services for long periods. The Incoloy 800ht sheet is welded and processed following standard shop fabrication processes. These sheets can \ be solid-solution hardened, work-hardened, and precipitation hardened.

As Stockist We can stock the greatest assortment of Alloy 800HT Strip because of our facilities, check temperature range/ Dimensions

 

Incoloy 800ht Plate superalloys are designed to perform at temperatures above 1290 degrees F. These modules offer excellent creep-rupture properties and don’t become embrittled at temperatures up to 1600 degrees F. They are generally preferred in applications that are exposed to high temperatures. 

 

Astm specification helps in publishing and developing consensus of technical standards within this grade. The specification for this grade is ASTM B 409, B 408, B 407, and B 564. The UNS number for these modules is N08810/N08811.

 

• Grade: Incoloy 800HT (Alloy 800HT, UNS N08811, 1.4959) Plate
• Width Range: 30" - 240"
• Incoloy 800ht Plate Thickness: 7 gauge - 28 gauge or 3.664mm - .321mm
• Length Range: Up to144" Non-Standard or Longer Lengths as per need
• Processing: Shearing to Custom need
• Finishes: 2B, 2D, 4Pol, X10, BA, XL, XL Blend S, Buff, NO (8), SATIN (Met with Plastic Coated), NO.1, Hairline, Mirror Finish, NO.4
• Incoloy 800ht Plate Form:  Foils, Coils, Plain Sheet, Rolls, Perforated Sheet, Shim Sheet, Strip, Chequered Plate, Blank (Circle), Flats, Ring (Flange)

 

 

If you are looking dealer and distributor to buy WERKSTOFF NR. 1.4958 Perforated and UNS N08811 Shim Sheet, enquire now !, check Incoloy 800ht welding

 

Incoloy 800ht alloys Plate can be welded following standard welding procedures. The processes include GTAW, Plasma, MIG, and SMAW. The material should be solution annealed and free from any grease, scales, or marking before initiating the welding process.

Post weld annealing or treatment is not required. After the welding process brushing the module with a wire brush will help in removing the heat tint on the surface eliminating, the requirement of additional pickling.

 

Cutting of alloys is a difficult job requiring a lot of time and effort. An ASTM B409 UNS N08810 Sheet that has been cut in precise lengths by the supplier will eliminate the wastage of material. The process of cutting or slicing down the Alloy 800HT Strip not only saves costs but also helps in getting rid of waste material that would’ve accumulated during this process. Cut to size alloys of a WERKSTOFF NR. 1.4958 Perforated Sheet would indirectly lead to cut down in worker wages and help your business grow faster. As the problem of cutting down these aesthetically appealing NCF 800HT Chequered Plate is eliminated the workers can be directed towards finishing the main project faster and more efficiently.

Cutting or shearing of an Incoloy 800HT Coil is a dangerous process requiring the utilization of specialized material. Injuries are very common during the cutting procedure. A supplier who can supply cut-to-size Inconel 800H Foil will help in eliminating this unnecessary disturbance. Apart from this, the cutting equipment utilized costs a lot of capital that can be invested in other parts of the business. Cutting a UNS N08811 Shim Sheet from experienced dealer is far better than cutting these sheets from inexperienced workers.

Suppliers can cut the versatile Nickel Alloy 800H Hot Rolled Plate properly using the latest technology cleanly and accurately. The latest gadgets can ensure that cutting the ASME SB409 Alloy 800HT Clad Plate is a high-output operation allowing the material to be easily cut and sheared in small lengths at specified angles. Getting a dealer who can provide cut to size DIN 1.4859 Cold Rolled Plate is the best choice you get. The simple but effective procedure will always keep your project ahead of the deadline with a good financial bearing.

 

 

 

Exporter and Stockholders of NCF 800HT Coil and Foil , before the plates are delivered Hardness, hydrostatic, flattening, and other testing are carried out at triton

 

 

We can ship Inconel 800H Hot Rolled and Cold Rolled Plate to any location. Our knowledgeable sales engineers and procurement specialists can help you find the optimum solution for your needs.

 

 

• #BA
• #2D
• #2BA
• #1
• #2B
• #2
• #CBA

 

 

• Petroleum Refining
• Power Generation
• Thermal Processing Fixtures
• Chemical and Petrochemical Processing

 

 

 

 

 

• Good resistance to many sulfur-containing atmospheres
• High creep rupture strength
• Good corrosion resistance in many acidic environments
• High temperature strength
• Resistant to oxidation and carburization in high temperature environments