Manufacturer and Supplier of ASTM A240 Type 304L Plate at Genuine price, see Stainless Steel 304l Vs 316l
Table Of Content
304L is a low-carbon version of the SS 304 grade. The 304l stainless steel sheet is designed with 18% chromium coupled with 8% of nickel. The lower carbon content consisting of maximum 0.030% ensures the SS 304L Sheet has excellent weldability. The austenitic grade resists atmospheric corrosion and works well in reducing environments. A stainless steel 304l sheet performs well in moderately reducing media and shows enhanced resistance against intergranular corrosion.
The 304L Stainless Steel Plate is a thicker than a sheet designed with a thickness of above 6mm. The high-strength plates show excellent strength and tolerances in stress-induced systems. Stainless 304L Plate is non-magnetic during the annealed condition but can be magnetic if annealed. The superior mechanical properties coupled with the physical properties make the SS 304L Plate an item of choice for several applications
304l and 316l are low carbon versions of the 304 and 316 grade respectively. 304l Stainless Steel Sheet doesn’t have many differentiating factors from the latter, but the chemical composition is what sets both these grades apart. Sa 240 304l component is designed with a composition of 18% chromium and 8% nickel. The 316l grade has a chemical content of 16% chromium and 10% nickel. It also has a 2-3% molybdenum content, which is absent in the Sa 240 Gr 304l grade.
The content of molybdenum gives the grade added tolerance and resistances when compared to the 304l Stainless Steel Plate. Apart from this, it also helps the 316l grade to possess enhanced resistance against chlorides in marine ecosystems. 304l Plate is not designed to withstand higher levels of chloride content.
Buy Online ASME SA240 UNS S30403 Strip and Coil at dealer price in India in custom sizes, view Stainless Steel 304 Vs 304l Price
Stainless Steel 304 Vs 304l Price
304 and 304l Stainless have identical properties apart from their carbon content. UNS S30403 Strip of the 304l grade is cheaper due to the usage of lower concentration of carbon in its chemical concentrations like the SUS 304L Foil when put in direct comparison to a SS 304 strip and foil. Both these grades have identical performance; however, the Werkstoff No 1.4307 Coil is slightly cheaper compared to the latter.
| Size |
|
|---|---|
| Thickness | 0.1 mm to 100 mm |
| Width | 10 mm - 2500mm |
| Length | 4m, 2m, 2.44m, 3m, or custom length |
| Finish | Mirror, 1D, 2B, BA, No.1, brush, SATIN, 8K, 2D, hairline, No.4, No.8 |
| Description | Price |
| 304L Stainless Plate Sheets Price in 1mm 2mm 3mm Coil | US $ 1650-1700 / Ton |
| Cold Rolled SS Plate 304l | US $ 1600-1800 / Ton |
| 0.1mm~3.0mm Cold Rolled Stainless Sheet Grade 304L | US $ 2300-3500 / Ton |
| 304L SS Stainless Sheet | US $ 700-1500 / Ton |
| 304L Stainless Sheet | US $ 1.6-2.5 / kg |
| 0.3mm 1mm 3mm AISI 2b Ba 304L 4X8 Stainless Sheet | US $ 1446-4339 / Ton |
| 304L Stainless Sheet with 2b Ba Hairline Mirror Color Decorative Finish | US $ 1800-2250 / Ton |
| AISI SS 304L Hot Rolled Sheet | US $ 1000-2000 / Ton |
You're having trouble obtaining Werkstoff No 1.4307 Foil in the sizes you need ? As Global Exporter and Stockholder we supply 304l Stainless Steel Sheet, check Thickness and weight chart
What is Thickness Range of 304l Stainless Steel Plate and Sheet
Plates and sheets are important sheets within the 304l grade. ASTM A240 Type 304L Plate is designed with thicknesses of over 6mm and is employed in applications that require good stability and strength. ASME SA240 304L Stainless Sheet is a component that is designed with thicknesses below 6mm. They are employed in the application that requires weight-saving measures. SS 304L Perforated Sheet is generally available in thickness ranging between 0.3mm to 15mm.
These sheets are designed in different configurations. An AISI 304L Shim Sheet is employed in different applications to fill spaces between metal and is available in thicknesses between 0.2mm to 120mm. All these modules can be hot, or cold rolled. 304L Stainless Steel Cold Rolled Plate can be produced or coiled in thickness up to 12mm thick. Cold rolling helps in improving the overall quality of the plate. 304L Stainless Steel Hot Rolled Plate is formed in desired dimensions after heating at high temperatures.
304L Stainless Steel Sheet
304L Stainless Steel Plate
SS 304L Perforated Sheet
ASTM A240 Type 304L Coil
SS 304L Plate
UNS S30403 Strip
Please enter values then click on Calculate.
| Thickness | Size Range | Thickness | Surface Area per Unit weight | Approx Weight per Sheet | ||
|---|---|---|---|---|---|---|
| inches | mm | kg/m² | lbs/ft² | kg | lbs | |
| 0.015 | 36 x 120 | 0.381 | 3.07566 | 0.630 | 8.5617 | 18.90 |
| 0.015 | 36 x 96 | 0.381 | 3.07566 | 0.630 | 6.84936 | 15.12 |
| 0.0178 | 36 x 120 | 0.45212 | 3.690792 | 0.756 | 10.27404 | 22.68 |
| 0.0178 | 36 x 96 | 0.45212 | 3.690792 | 0.756 | 8.22195 | 18.15 |
| 0.0178 | 48 x 120 | 0.45212 | 3.690792 | 0.756 | 13.69872 | 30.24 |
| 0.0178 | 48 x 96 | 0.45212 | 3.690792 | 0.756 | 10.95807 | 24.19 |
| 0.0235 | 30 x 120 | 0.5969 | 4.921056 | 1.008 | 11.4156 | 25.20 |
| 0.0235 | 30 x 96 | 0.5969 | 4.921056 | 1.008 | 9.13248 | 20.16 |
| 0.0235 | 36 x 120 | 0.5969 | 4.921056 | 1.008 | 13.69872 | 30.24 |
| 0.0235 | 36 x 96 | 0.5969 | 4.921056 | 1.008 | 10.95807 | 24.19 |
| 0.0355 | 36 x 96 | 0.9017 | 7.381584 | 1.512 | 16.43937 | 36.29 |
| 0.0235 | 48 x 96 | 0.5969 | 4.921056 | 1.008 | 14.61378 | 32.26 |
| 0.0235 | 36 x 144 | 0.5969 | 4.921056 | 1.008 | 16.43937 | 36.29 |
| 0.0235 | 48 x 120 | 0.5969 | 4.921056 | 1.008 | 18.26496 | 40.32 |
| 0.0291 | 30 x 96 | 0.73914 | 6.15132 | 1.260 | 11.4156 | 25.20 |
| 0.0235 | 48 x 144 | 0.5969 | 4.921056 | 1.008 | 21.92067 | 48.39 |
| 0.0291 | 30 x 120 | 0.73914 | 6.15132 | 1.260 | 14.2695 | 31.50 |
| 0.0291 | 36 x 120 | 0.73914 | 6.15132 | 1.260 | 17.1234 | 37.80 |
| 0.0291 | 36 x 96 | 0.73914 | 6.15132 | 1.260 | 13.69872 | 30.24 |
| 0.0355 | 30 x 96 | 0.9017 | 7.381584 | 1.512 | 13.69872 | 30.24 |
| 0.0291 | 36 x 144 | 0.73914 | 6.15132 | 1.260 | 20.55261 | 45.37 |
| 0.0291 | 48 x 120 | 0.73914 | 6.15132 | 1.260 | 22.83573 | 50.41 |
| 0.0291 | 48 x 96 | 0.73914 | 6.15132 | 1.260 | 18.26496 | 40.32 |
| 0.0291 | 48 x 144 | 0.73914 | 6.15132 | 1.260 | 27.40197 | 60.49 |
| 0.0355 | 30 x 120 | 0.9017 | 7.381584 | 1.512 | 17.1234 | 37.80 |
| Thickness Tolerance | |||
| Spec. Thickness, Inch | Widths ≤ 40" | Widths over 40" & ≤ 50" | |
| Cold Rolled (CR) | 0.012 Inch | +/- 0.001 Inch | ... |
| Cold Rolled (CR) | 0.016 Inch | +/- 0.0015 Inch | +/- 0.0015 Inch |
| Cold Rolled (CR) | 0.020 Inch | +/- 0.0015 Inch | +/- 0.0015 Inch |
| Cold Rolled (CR) | 0.024 Inch | +/- 0.002 Inch | +/- 0.002 Inch |
| Cold Rolled (CR) | 0.032 Inch | +/- 0.002 Inch | +/- 0.002 Inch |
| Cold Rolled (CR) | 0.040 Inch | +/- 0.0025 Inch | +/- 0.0025 Inch |
| Cold Rolled (CR) | 0.047 Inch | +/- 0.003 Inch | +/- 0.003 Inch |
| Cold Rolled (CR) | 0.059 Inch | +/- 0.003 Inch | +/- 0.003 Inch |
| Cold Rolled (CR) | 0.079 Inch | +/- 0.004 Inch | +/- 0.004 Inch |
| Cold Rolled (CR) | 0.098 Inch | +/- 0.004 Inch | +/- 0.004 Inch |
| Cold Rolled (CR) | 0.118 Inch | +/- 0.005 Inch | +/- 0.005 Inch |
| Cold Rolled (CR) | 0.157 Inch | +/- 0.007 Inch | +/- 0.007 Inch |
| Cold Rolled (CR) | 0.197 Inch | +/- 0.007 Inch | +/- 0.007 Inch |
| Cold Rolled (CR) | 0.236 Inch | +/- 0.007 Inch | +/- 0.008 Inch |
| Cold Rolled (CR) | 0.3125 Inch | +/- 0.007 Inch | +/- 0.009 Inch |
| Stainless 304L Sheet Weight per sheet (Kg) |
Size (mm) | Weight per sheet (Kg) |
Size (mm) |
|---|---|---|---|
| 17.9 | 2500 x1250 x 0.7 | 55.3 | 3000 x 1500 x 1.5 |
| 11.5 | 2000 x1000 x 0.7 | 38.4 | 2500 x 1250 x 1.5 |
| 14.7 | 2000 x1000 x 0.9 | 32.7 | 2000 x 1000 x 2.0 |
| 16.4 | 2000 x1000 x 1.0 | 73.7 | 3000 x 1500 x 2.0 |
| 23.0 | 2500 x1250 x 0.9 | 51.2 | 2500 x 1250 x 2.0 |
| 36.8 | 3000 x1500 x 1.0 | 63.9 | 2500 x 1250 x 2.5 |
| 25.6 | 2500 x1250 x 1.0 | 40.9 | 2000 x 1000 x 2.5 |
| 19.6 | 2000 x1000 x 1.2 | 92.1 | 3000 x 1500 x 2.5 |
| 44.2 | 3000 x1500 x 1.2 | 77.5 | 2500 x 1250 x 3.0 |
| 30.7 | 2500 x1250 x 1.2 | 49.6 | 2000 x 1000 x 3.0 |
| 24.6 | 2000 x1000 x 1.5 | 112.0 | 3000 x 1500 x 3.0 |
Stocking Distributor and Wholesaler of SS 304L Perforated Sheet, Refer SS 304l Plate Weight Calculator here
SS 304l Density in kg/m3
The lower carbon 304l grade is designed with a density of 8000 kg/m3.
SS 304l Equivalent
Compare SS 304l Plate Price In India and Malaysia
Prices of components keep fluctuating based on demand and supply. SS 304l Plate Price In India is in the range between $2 and $3. These high octane plates are available at near-identical rates in Malaysia. The availability and logistics influence the overall 304l Stainless Steel Plate Price.
We Keep Bulk Stock of Stainless Steel 304L Hot and Cold Rolled Plate at our stockyard, contact us to request a quote
| SS | Melting Point | Psi / Mpa - Tensile Stress | Density | Psi / Mpa - Yield Stress (0.2%Offset) | % Elongation |
|---|---|---|---|---|---|
| 316 | 1400 °C (2550 °F) | 515 75000 |
8.0 g/cm3 | 205 30000 |
35 % |
| Element | % by Weight |
| C | 0.030 |
| Mn | 2.00 |
| P | 0.045 |
| Sulfur | 0.030 |
| S | 0.75 |
| Cr | 18.00 20.00 |
| Ni | 8.0 12.00 |
| Nitrogen (N) | 0.10 |
| SS | ASTM | UNS | ASME | JIS | British Standard (Old) | European Standard | SS | |
| BS | WNR | Name | ||||||
| 304L | A240 | S30403 | SA 240 | SUS 304L | 304S11 | 1.4306 | X2CrNi19-11 | 2352 |
Stainless 304l Sheet Applicable international standard
- ASME SA 240 Type 304L
- ASTM A240 Grade 304L
- ASTM A 480
- BS EN 10088-4
- EN ISO 18286
- ASTM A 959
- EN 10051
- ASME IID
- EN 10088-1
- BS EN 10088-2
- EN ISO 9445
- ISO 15510
- BS EN 10028-7
- ISO 15156
- NACE MR 0175