253ma Plate

253ma is an austenitic heat resistant alloy. 253ma Plate is designed to possess a superb chemical concentration giving the plates superior tolerances in different environments. The 253ma Stainless Steel Plate shows good strength due to the content of nitrogen present in its outstanding chemical composition. This enables the Sandvik 253 Ma Plate to show comparable creep rupture strength similar to most nickel alloy components. The versatile Ra 253 Ma Plate has micro-alloy additions in the plate that allow the grade to maintain good heat-resistant properties.

253ma Steel Plate has oxidation resistance up to 2000 degrees F, allowing the material grade to work well at extreme temperatures. Avesta 253 Ma Plate showcase enhanced mechanical properties. These modules can be easily elongated and have a hardness of 95 Rockwell B. The Uns S30815 grade exhibits good electrical resistivity of 850 Nw.m, with an excellent elastic modulus of 200GPa. The robust 1.4835 grade can be easily welded by standard fusion welding methods that make use of a good filler material. 

253ma Plate Suppliers can heat treat these components at 1050 to 1150 degrees C and supply the modules in annealed conditions. Buy 253 Ma Plate, which can be employed in high-temperature systems like heat exchangers, kilns, oven components, petrochemical, refinery tube hangers, etc. 

 

• 310 stainless grade is designed with a higher concentration of nickel and chromium over the 253ma.
• 253ma grade has additions of cerium, silicon, and nitrogen which is absent in the 310 stainless grade.
• 253ma is designed to possess a higher creep strength than the standard 310 stainless grade.
• 253ma has a service temperature of 1650 degrees F or more, while 310 grade has a service temperature of 1500 degrees F.

 

253ma Plate Suppliers, buy directly from manufacturer of ASME SA240 UNS S30815 Perforated Sheet and Strip at Dealer Price , see temperature range

 

253ma plate suppliers are far and forth in the country. Finding a 253MA Sheets supplier who can provide quality over anything is a difficult task. But you may have found the right fit with us. We put the ASTM A240 253 MA Plates and all our products through vigorous testing to eliminate any flaws and defects in them.

Our versatile Jindal Steel Stainless Steel Plate 253MA Plate is available at 10% cheaper rates than most suppliers in the country. In our vast experience in this industry, the ASME SA240 UNS S30815 Perforated Sheet rejection rate has never crossed 0.25%. This not only cements our quality statement but also shows our dedication to designing the best products for the best customers.

253ma is stainless steel heat-resistant austenitic alloy. RA 253 MA® Strip possesses superior resistance to oxidative media. The versatile grade shows resistance to air at temperatures up to 1150 degrees C. The DIN 1.4835 Coil is a high-strength module that is employed in high-pressure systems for structural and pressure vessel systems.

253ma stainless steel Foil possesses resistances in temperatures ranging between 500 degrees C up to 900 degrees C in stress-induced setups. The 253ma steel Shim sheet shows good resistance against carburization and sulfur-bearing gases in an oxidizing atmosphere.

 

 

 

 

Do you have trouble finding ASTM A240 253 MA Sheet in unusual sizes? we are Stocking Distributor of Avesta/ Ra/ Sandvik 253 Ma Plate , view composition/ equivalent

 

253ma stainless steel is designed with a superior chemical composition consisting of different alloying elements. The composition of alloys in this grade include 0.10% of carbon, 0.80% manganese, 2% silicon, 0.040% of phosphorous, 0.030% sulfur, 22% chromium, 10% nickel, 0.20% nitrogen and 0.08% cerium.

 

The lean austenitic 253ma grade equivalent material is the UNS S30815, ENN 1.4835, EN X9CrNiSiNCe21-11-2, and SAE 253MA. The equivalent in the DIN standard is the DIN 1.4835, DIN X10CrNiSiN21-11, and DIN X9CrNiSiNCe21-11-2

 

always check the delivery conditions Before purchasing DIN 1.4835 Coil and Foil from any stockist, view 253ma Vs 316 Stainless

 

• 253ma is an austenitic heat resistant alloy. The 316 stainless steel grade is an austenitic corrosion-resistant grade.
• The presence of cerium and nitrogen gives these modules higher strength and oxidation resistances over the 316 grade.
• The 316 grade has higher chromium and nickel content with additions of molybdenum, giving them superior corrosion resistance properties over the 253ma grade.
• 253ma has a higher temperature working range than the 316 stainless steel grade.

 

253 MA can be used in a variety of applications; here are just a few examples:

• Combustion chambers
• Corrugated Boxes
• Boiler Nozzles
• Pyrolysis Vessels
• Radiant Tubes
• Bar Baskets
• Cyclones

 

 

We have a large stock of Hot and Cold Rolled 253ma Steel Plate in our warehouse at Wholesaler price, please contact us for a free sample and a stock list.

 

Purchasing any steel product, the main aim should be to focus on quality over anything. Below listed are a few tips to purchase the best products

1.   Identify key features of the 253ma steel plate that would suit your operation.
2.   Purchase products in correct dimensions to avoid unnecessary costs for cutting or shearing.
3.   Check and identify other modules having similar properties and compare them.
4.   Good transportation and logistics help in cutting down costs
5.   Purchase in bulk to avoid shortages or price rise
6.   Book products in advance
7.   Evaluate the buying options and check payment methods available
8.   Access test results to eliminate the presence of flaws or defects within the components
9.   Buy from trusted stores
10.   Ensure transparency and access to all documents before finalizing the purchase.

 

 

 

 

•   Melting Range: 1371-1432 ⁰C
•   Density: 8 g/cm³
•   Poisson's Ratio:0.31

 

 

•   UNS: S30815
•   EN Number: 1.4835
•   W.Nr.: (1.4893)*/(1.4828 mod.)*
•   SS: 2368*