ASTM A240 Type 410 Plate Stockist, We can supply with customized thicknesses and sizes, view SS 410 Plate Price Per Kg
Table Of Content
Are You looking for 410 Stainless Steel Sheet Suppliers?
The most basic step is finding a supplier who can provide the best products at the best rates. An ASTM A240 Type 410 Plate supplier who is government-approved should be always kept on the top of the list. The suppliers of this ASME SA240 410 Stainless Steel Sheet should have stock of material to meet the size and number required to run a smooth operation. A retailer of the SS 410 Shim Sheet having a chain of stores, close to the site of the project offers a huge advantage.
The logistics and transportation of SUH 410 Foil plays a crucial role in determining the price of the product in combination with the rate sold by the supplier. The Werkstoff No 1.4006 Coil is an optimum product allowing for easy transportation. These coils can be later sheared in foils, sheets, etc. Before finalizing the UNS S41000 Strip, all documents about the product the test reports, any defects, or any abnormalities in the module should be properly accessed.
Buying and booking Stainless Steel 410 hot Rolled Plate in advance will help in averting any calamities due to shortage or sudden price rise in steel modules. Suppliers who can provide good insight on the AISI 410 Cold Rolled Plate and explain, what processes can help the product achieve maximum functionality are a bonus. All in all, SS 410 Perforated Sheet suppliers, providing the best quality components should always be prioritized.
410 SS belongs to martensitic SS grade. 410 SS Sheet is designed with a chemical concentration of 11.5-13.5% of chromium and 0.75% of nickel content. The superior concentration gives the SS 410 Sheet enhanced corrosion resistance and oxidation tolerances up to 1292 degrees F. They can be employed in continuous service temperatures up to 1500 degrees F. The quality of the Stainless 410 Sheet can be improved with processes such as hardening, tempering, and quenching operations.
These processes improve the hardness of the 410 Stainless Sheet, giving them excellent heat resistance coupled with high strength and mild corrosion resistance. The Stainless Steel 410 Sheet has excellent tensile and yield strengths with good elongation properties. These properties gradually increase as the Stainless Steel 410 Plate is tempered further. The modules can be easily welded following general welding techniques. The SS 410 Plate material is preferentially pre-heated at temperatures between 150 to 260 degrees C, followed by annealing to navigate past cracking. The 410 Stainless Plate is seen in use in cutlery, bolts, screws, petroleum fractioning structures, etc.
410 Stainless Sheet For Sale, All Sizes available in UNS S41000 Strip with Test Certificates, check SS 410 Plate Weight Calculator and 410 stainless steel vs 304
- Stainless 410 is designed with a chemical composition consisting of 18% chromium and 8% nickel. 304-grade stainless has a chromium content between 11.5-13.5% with a small content of nickel.
- The austenitic 304 grade is ductile and can be formed into subsequent products. Ferritic SS 410 is designed with a superior hardness reducing its ductility.
Common Trade Names
- 410 SS
- Alloy 410
- ATI 410 (™ Allegheny Technologies)
- AISI Type 410
Product name | 410 Stainless Sheet |
Standard | ASTM, AISI, JIS, DIN, JIS, SUS, GB, EN,etc |
Width | 3mm-2000mm or as required |
Length | As required |
Thickness | 0.1mm-300mm or as required |
Technique | cold rolled/ Hot rolled |
Thickness Tolerance | ±0.01mm |
Surface Treatment | 2B, NO.1, BA, NO.4, HL Or According to customer need |
Material | 410 |
Other industry standards we comply with:
- GE Aviation S-SPEC-35 AeDMS S-400
- PWA-LCS
- EN 1.4006
- GE Aircraft Engine (GT193)
- DFARS Compliant
- RR SABRe Edition 2
Standard Inventory Specifications
- ASTM A 276
- AMS 5504
- UNS S41000
- AMS 5613 (Chemistry only)
- ASTM A 240
- ASTM F 899
- ASTM A 493
- B50991B
- ASME SA 240
Description | Price |
410 Cold Rolled Stainless Plate 0.1mm~50mm | US $ 1300-1400 / Ton |
410 Cold/Hot Rolled Stainless Steel Sheet | US $ 1200-2000 / Ton |
410 perforated Stainless Sheet | US $ 1000-2000 / Ton |
410 Stainless Plate/Coil/Roll/Sheet 0.1mm~50mm | US $ 1300-1400 / Ton |
AISI 410 Mirror 2b Surface Stainless Sheet | US $ 2000-2500 / Ton |
410 Ba Finish 1.5mm X 1250mm X 2438mm Stainless Steel Sheet | US $ 20-40 / sheet |
410 Cold Rolled Hot Rolled Stainless Plate Sheet | US $ 1.1-1.5 / kg |
Hot Rolled Stainless Plate 410 | US $ 1200-3000 / Ton |
Please enter values then click on Calculate.
Are you looking for Werkstoff No 1.4006 Coil and Foil exporter and Stockholder in specific size? Check out our inventory of 410 Stainless Plate and 410 stainless steel vs 316
- The chromium content in steel plays a crucial role in determining the corrosion resistance of a grade. 316 grade has a chromium content of 16%, while 410 exhibits a chromium concentration of a maximum of 13.5%.
- SS 316 has superior mechanical properties than the SS 410 grade, making them ideal for use in a wide range of fields.
- The content of molybdenum, nickel coupled with higher chromium content, makes the 316 grade expensive compared to the 410 stainless steel sheet.
buy directly from manufacturer of SS 410 Perforated and Shim Sheet material online and save cost, check 410 Stainless Sheet Properties and Application
Why 410 stainless steel call food grade?
Cutlery and food-grade steel have to possess excellent strength, enhanced durability coupled with good corrosion resistance. These are the features that are seen within the 410 grade. They may be less tolerant to corrosion compared to austenitic grades, but they can withstand different acids and chemicals which are commonly found in food. Apart from this, their excellent oxidation resistance properties in high temperatures make this martensitic grade ideal for use in food-grade components.
Check 410 Stainless Steel Mechanical Properties
SS 410 is designed with superior mechanical properties. The modules have a tensile strength of 450mpa and can be easily elongated by 20%. 410 Stainless Steel Yield Strength is 275mpa. These modules exhibit a hardness of a minimum of 217HB.
410 Stainless Steel Magnetic Permeability
SS 410 is magnetic in both annealed and heat-treated conditions. These modules exhibit a magnetic permeability between 700-1000
410 Stainless Sheet Suppliers and AISI 410 Hot and Cold Rolled Plate Dealer and Distributors, Don't forget to check 410 Stainless Steel Tempering Chart/ Hardness
Tempering Temperature (°C) |
Tensile Strength (MPa) |
Yield Strength 0.2% Proof (MPa) |
Elongation (% in 50 mm) |
Hardness Brinell (HB) |
Impact Charpy V (J) |
Annealed condition |
480 min |
275 min |
16 min |
- |
- |
204 |
1475 |
1005 |
11 |
400 |
30 |
316 |
1470 |
961 |
18 |
400 |
36 |
427 |
1340 |
920 |
18.5 |
405 |
# |
538 |
985 |
730 |
16 |
321 |
# |
593 |
870 |
675 |
20 |
255 |
39 |
650 |
300 |
270 |
29.5 |
225 |
80 |
![]() |
![]() |
![]() |
![]() |
ThyssenKrupp |
Jindal |
Aperam |
Posco |
![]() |
![]() |
![]() |
![]() |
Outokumpu |
ArcelorMittal |
Nippon Steel & Sumitomo Metal |
JFE Steel |

410 Stainless Steel Sheet

Stainless Steel 410 Plate

SS 410 Perforated Sheet

410 SS Coil

ASTM A240 Type 410 Plate

UNS S41000 Strip
What is 410 Stainless Steel Hardness?
Grade 410 stainless possesses excellent strength and enhanced hardness. The 410 stainless steel sheet modules have a maximum hardness of 96HRB.
Stainless 410 Sheet Maximum temperatures in dry air
Grade |
Continuous (°C) |
Intermittent (°C) |
SS 410 |
705 |
815 |
HS Code | Description |
---|---|
72193590 | SIZE 0.25MM x 425MM COIL-410 STAINLESS STEEL COLD ROLLED PLATE |
72193590 | (SIZE 0.27MM x DIA 368MM) STAINLESS STEEL COLD ROLLED SS FLAT ROLLED PRODUCTS |
72193590 | SIZE 0.3MM x DIA 520MM SS COLD ROLLED FLAT ROLLED PRODUCTS |
72193390 | GRADE 1.4000 (410) STAINLESS STEEL C.R COIL |
72193490 | MAGNETIC GRADE 410S STAINLESS STEEL CR WIDER COILS SIZE (0.38MM THK X 1295MM WIDTH X C) |
72193590 | SIZE 0.3MM x 625MM) COIL-410 STAINLESS STEEL COLD ROLLED SS FLAT ROLLED PRODUCTS |
Thickness | Size Range | Thickness | Surface Area per Unit weight | Approx Weight per Sheet | ||
---|---|---|---|---|---|---|
inches | mm | kg/m² | lbs/ft² | kg | lbs | |
0.015 | 36 x 120 | 0.381 | 3.07566 | 0.630 | 8.5617 | 18.90 |
0.015 | 36 x 96 | 0.381 | 3.07566 | 0.630 | 6.84936 | 15.12 |
0.0178 | 36 x 120 | 0.45212 | 3.690792 | 0.756 | 10.27404 | 22.68 |
0.0178 | 36 x 96 | 0.45212 | 3.690792 | 0.756 | 8.22195 | 18.15 |
0.0178 | 48 x 120 | 0.45212 | 3.690792 | 0.756 | 13.69872 | 30.24 |
0.0178 | 48 x 96 | 0.45212 | 3.690792 | 0.756 | 10.95807 | 24.19 |
0.0235 | 30 x 120 | 0.5969 | 4.921056 | 1.008 | 11.4156 | 25.20 |
0.0235 | 30 x 96 | 0.5969 | 4.921056 | 1.008 | 9.13248 | 20.16 |
0.0235 | 36 x 120 | 0.5969 | 4.921056 | 1.008 | 13.69872 | 30.24 |
0.0235 | 36 x 96 | 0.5969 | 4.921056 | 1.008 | 10.95807 | 24.19 |
0.0355 | 36 x 96 | 0.9017 | 7.381584 | 1.512 | 16.43937 | 36.29 |
0.0235 | 48 x 96 | 0.5969 | 4.921056 | 1.008 | 14.61378 | 32.26 |
0.0235 | 36 x 144 | 0.5969 | 4.921056 | 1.008 | 16.43937 | 36.29 |
0.0235 | 48 x 120 | 0.5969 | 4.921056 | 1.008 | 18.26496 | 40.32 |
0.0291 | 30 x 96 | 0.73914 | 6.15132 | 1.260 | 11.4156 | 25.20 |
0.0235 | 48 x 144 | 0.5969 | 4.921056 | 1.008 | 21.92067 | 48.39 |
0.0291 | 30 x 120 | 0.73914 | 6.15132 | 1.260 | 14.2695 | 31.50 |
0.0291 | 36 x 120 | 0.73914 | 6.15132 | 1.260 | 17.1234 | 37.80 |
0.0291 | 36 x 96 | 0.73914 | 6.15132 | 1.260 | 13.69872 | 30.24 |
0.0355 | 30 x 96 | 0.9017 | 7.381584 | 1.512 | 13.69872 | 30.24 |
0.0291 | 36 x 144 | 0.73914 | 6.15132 | 1.260 | 20.55261 | 45.37 |
0.0291 | 48 x 120 | 0.73914 | 6.15132 | 1.260 | 22.83573 | 50.41 |
0.0291 | 48 x 96 | 0.73914 | 6.15132 | 1.260 | 18.26496 | 40.32 |
0.0291 | 48 x 144 | 0.73914 | 6.15132 | 1.260 | 27.40197 | 60.49 |
0.0355 | 30 x 120 | 0.9017 | 7.381584 | 1.512 | 17.1234 | 37.80 |
WERKSTOFF NR./ WNR | ASTM | EN | GRADE | BS | UNS | JIS |
1.4006 | A240 | X12Cr13 | AISI 410 | 410S21 | S41000 | SUS 410 |
Condition of material | Hardness Brinell |
Tensile Strength N/mm² |
Yield Strength N/mm² |
Izod KCV J |
Elongation in % |
---|---|---|---|---|---|
R | 201-255 | 700-850 | 495 | 34 | 15 |
Material | C | Si | Mo | Mn | S | P | Cr | Ni | |
Grade 410 | min. max |
0.09-0.15% | 1.00% max | 0.30% max | 1.00% max | 0.03% max | 0.04% max | 11.50-13.50% | 1.00% max |
- Aerospace structures
- manifolds, Automotive exhausts and high temperature engine components
- Manufacturing flat springs
- Knives and kitchen utensils
- Medical instruments and devices
- Petro-chemical applications
- nuts, Bolts, fasteners and springs
- Hand tools
|
|