SS 302 Sheet Supplier in India at guaranteed best price in India
Table Of Content
302 stainless is a ductile, very robust grade with excellent corrosion resistance. Heat treatment will not harden 302 SS since it is non-magnetic. It can be cold worked to enhance hardness, although it will become somewhat magnetic as a result. It's usually employed in the annealed state, and it's known for its formability and simplicity of production.
The 302 stainless steel grade belongs to an austenitic SS grade. A 302 Stainless Steel Sheet is designed with a superior composition of 17-19% chromium and 8-10% of nickel with other constituting alloys. The content embedded within these sheets gives them enhanced corrosion and oxidation resistance properties across stress-induced setups. The 302 Stainless Sheet is a higher carbon version of sheets that can be hot or cold rolled. The sheets are generally non-magnetic in the annealed condition but become magnetic in cold-rolled conditions. 302 SS Sheet is generally designed in thickness below 6mm. These sheets are used in a wide spectrum of applications as the grade has an aesthetical appeal in different setups.
The SS 302 Sheet is highly susceptible to carbide precipitation due to the higher content of carbon in it, thereby restricting the welding properties of the sheet metal. The versatile Stainless Steel Alloy 302 sheet is designed with excellent mechanical properties. The sheets possess a minimum tensile strength of 620mpa with a minimum yield strength of 275mpa and can be elongated by 40% in the system. The sheets have a hardness of 147 max Brinell and exhibit an elastic modulus of 193GPA with a Poisson's ratio between 0.27 to 0.30.
The AMS 5516 Plate is a high-strength steel grade that is designed in thickness above 6mm and can extend up to 100mm or more. These plates provide good stability and support to different applications in the industry. A Type 302 Stainless Steel Strip, on the contrary, is a thin metal strip having a thickness of less than 0.5mm. These strips perform the role of filler material and are seen in different welding operations. UNS S30200 Coil is a grade that is wound after processing it allowing it to be transported efficiently and later sheared in different shapes and sizes.
Standard Specifications | ASTM A240 / ASME SA240 |
Provide Plate Finish | 2B, BA NO(8),Hot rolled plate (HR), SATIN (Met with Plastic Coated), Cold rolled sheet (CR), 2D |
Thickness Available | 4 to 100mm |
Stock Length | 2440mm, 2000mm, 5800mm, 6000mm, 3000mm etc |
Width We manufacture |
1500mm, 3000mm, 2000mm, 2500mm, 1000mm, 1219mm, 1800mm, 3500mm etc |
Plate form accessible | Foils, Plain Sheets, Flats, Coils, Shim Sheets, Rolls, Chequered Plate, Strip, Perforated Sheets, Blank (Circle),Ring (Flange) etc. |
Mechanical Surface Finishing | etching, NO.1, hair line, Brush, embossed, 2D, 2B, NO.8, BA, 8K, checkered, NO.4, mirror, sand blast etc |
Standard Inventory Specifications
- ASTM A 666
- AMS 5516
- ASTM A 240
- UNS S30200
- ASME SA 240
- ASME SA 666
Description | Price |
302 Building Material Stainless Plate | US $ 1100.0-2500.0 / Ton |
AISI 302 2b Ba Stainless Sheets and Plate | US $ 1150.0-1350.0 / Ton |
ASTM A240 302 1219X2438mm Stainless Sheets | US $ 1100.0-2000.0 / Ton |
302 Etched 8K Mirror Finished Stainless Sheets | US $ 1.0-20.0 / Piece |
Hot Rolled ASTM A240 302 1- 6mm Stainless Sheet Plate | US $ 800.0-2200.0 / Ton |
Cold Rolled SS 302 Stainless Sheets | US $ 2100-2250 / Ton |
302 Decorative Stainless Sheets | US $ 1200-1800 / Ton |
Grade 302 Brush Hairline Finished Stainless Sheet | US $ 20-50 / Sheet |
Please enter values then click on Calculate.
AMS 5516 Plate Stockist In Mumbai, we offer Type 302 Stainless Steel Strip in almost any size or quantity, view thickness

302 Stainless Steel Sheet

ASTM A240 Type 302 Plate

SS 302 Perforated Sheet

UNS S30200 Coil

AMS 5516 Strip

Stainless Steel 302 Hot Rolled Plate
(APPROXIMATE INCHES) | METAL GAUGE | NOMINAL DECIMAL (+/- INCHES) |
0.1644 | 8 | 0.0080 |
0.1793 | 7 | 0.0080 |
0.1345 | 10 | 0.0070 |
0.1196 | 11 | 0.0050 |
0.1495 | 9 | 0.0080 |
0.1046 | 12 | 0.0050 |
0.0179 | 26 | 0.0015 |
0.0747 | 14 | 0.0040 |
0.0673 | 15 | 0.0040 |
0.0897 | 13 | 0.0050 |
0.0598 | 16 | 0.0030 |
0.0478 | 18 | 0.0030 |
0.0538 | 17 | 0.0030 |
0.0418 | 19 | 0.0030 |
0.0329 | 21 | 0.0025 |
0.0359 | 20 | 0.0030 |
0.0299 | 22 | 0.0020 |
0.0239 | 24 | 0.0020 |
0.0269 | 23 | 0.0020 |
0.0149 | 28 | 0.0010 |
0.0209 | 25 | 0.0015 |
1 1/2" | 1 1/4" | 1 3/4" | 3 1/2" | 2 1/4" | 2" | 2 3/4" | 2 1/2" | 3" | 4" |
---|---|---|---|---|---|---|---|---|---|
38.1mm | 31.8mm | 44.5mm | 88.9mm | 57.2mm | 50.8mm | 69.9mm | 63.5mm | 76.2mm | 101.6mm |
1/4" | 3/16" | 5/16" | 1" | 1/2" | 3/8" | 3/4" | 5/8" | 7/8" | 1 1/8" |
6.3mm | 4.8mm | 7.9mm | 25.4mm | 12.7mm | 9.5mm | 19mm | 15.9mm | 22.2mm | 28.6mm |
- Pressure containing applications
- Food and beverage industry
- Sanitary or cryogenic applications
UNS S30200 Coil Distributors, Get big Stock conform to international standards and specifications
SS | |||||||
---|---|---|---|---|---|---|---|
Size Of Sheets | 1.2 | 0.9 | 2.0 | 1.5 | 4.0 | 3.0 | 5.0 |
2500x1250 | 30 | 22.5 | 50 | 37.5 | 100 | 79 | 132 |
2000x1000 | 20 | 14.4 | 32 | 24 | 64 | 50 | 84 |
3000x1500 | 43 | 72 | 54 | 144 | 113 | 189 |
LB/Sq. Ft. | Gauge | LB/Sq In. | Gauge Tolerance | ||
---|---|---|---|---|---|
96″ Wide | 72″ Wide | ||||
8.579 | 3/16 | 0.1875 | 0.05958 | +.050″ -.010″ | +.045″ -.010″ |
9.870 | 7/32 | 0.2187 | 0.06854 | ||
11.162 | 1/4 | 0.2500 | 0.07750 | ||
13.746 | 5/16 | 0.3125 | 0.09546 | ||
16.496 | 3/8 | 0.3750 | 0.11456 | +.060″ -.010″ | +.055″ -.010″ |
19.080 | 7/16 | 0.4375 | 0.13250 | ||
21.633 | 1/2 | 0.5000 | 0.15044 | ||
24.247 | 9/16 | 0.5625 | 0.16838 | ||
26.831 | 5/8 | 0.6250 | 0.18633 | ||
29.415 | 11/16 | 0.6875 | 0.20427 | ||
32.123 | 3/4 | 0.7500 | 0.22308 | +.065″ -.010″ | +.060″ -.010″ |
34.707 | 13/16 | 0.8125 | 0.24102 | ||
37.291 | 7/8 | 0.8750 | 0.25897 | ||
39.875 | 15/16 | 0.9375 | 0.27691 | ||
42.665 | 1 | 1.0000 | 0.29628 | +.075 -.010″ | +.070″ -.010″ |
47.833 | 1-1/8 | 1.1250 | 0.33217 | ||
53.001 | 1-1/4 | 1.2500 | 0.36806 | ||
58.169 | 1-3/8 | 1.3750 | 0.40395 | ||
63.337 | 1-1/2 | 1.5000 | 0.43984 | ||
73.672 | 1-3/4 | 1.7500 | 0.51161 | ||
84.008 | 2 | 2.0000 | 0.58339 | +.150″ -.010″ | +.125″ -.010″ |
89.610 | 2-1/8 | 2.1250 | 0.62229 | ||
94.777 | 2-1/4 | 2.2500 | 0.65817 | ||
105.113 | 2-1/2 | 2.5000 | 0.72995 | ||
115.449 | 2-3/4 | 2.7500 | 0.80173 | ||
126.301 | 3 | 3.0000 | 0.87709 | +.160″ -.010″ | +.150″ -.010″ |
146.972 | 3-1/2 | 3.5000 | 1.02064 | ||
168.264 | 4 | 4.0000 | 1.16850 | +.200″ -.010 | +.180″ -.010″ |
302 Stainless Plate Weight Chart
Stainless 302 Sheet Weight per sheet (Kg) |
Size (mm) | Weight per sheet (Kg) |
Size (mm) |
---|---|---|---|
17.9 | 2500 x1250 x 0.7 | 55.3 | 3000 x 1500 x 1.5 |
11.5 | 2000 x1000 x 0.7 | 38.4 | 2500 x 1250 x 1.5 |
14.7 | 2000 x1000 x 0.9 | 32.7 | 2000 x 1000 x 2.0 |
16.4 | 2000 x1000 x 1.0 | 73.7 | 3000 x 1500 x 2.0 |
23.0 | 2500 x1250 x 0.9 | 51.2 | 2500 x 1250 x 2.0 |
36.8 | 3000 x1500 x 1.0 | 63.9 | 2500 x 1250 x 2.5 |
25.6 | 2500 x1250 x 1.0 | 40.9 | 2000 x 1000 x 2.5 |
19.6 | 2000 x1000 x 1.2 | 92.1 | 3000 x 1500 x 2.5 |
44.2 | 3000 x1500 x 1.2 | 77.5 | 2500 x 1250 x 3.0 |
30.7 | 2500 x1250 x 1.2 | 49.6 | 2000 x 1000 x 3.0 |
24.6 | 2000 x1000 x 1.5 | 112.0 | 3000 x 1500 x 3.0 |
Density lbm/in3 | Electrical Resistivity (in x 10(-6)) |
Thermal Conductivity (BTU/h ft. °F) |
Modulus of Elasticity (psi x 10(6)) |
Specific Heat (BTU/lb/ °F) |
Coefficient of Thermal Expansion (in/in)/ °F x 10(-6) |
Melting Range (°F) |
---|---|---|---|---|---|---|
at 68°F: 0.285 | 72.0 at 70°F | 9.4 at 212°F | 28 | 0.1200 at 32°F to 212°F | 9.6 at 32 – 212°F | 2500 to 2590 |
12.4 at 932 °F | 10.2 at 32 – 1000°F | |||||
10.4 at 32 – 1500°F |
We Guarantee Fastest Delivery Of Stainless Steel Alloy 302 sheet with All Documents Including Mill Certificate
- Resistance to corrosion
- Prevention of product contamination
- Resistance to oxidation
- East of fabrication
- Excellent formability
have difficulty to find 302 SS Sheet in tough length? Call Triton now
Hardness Rockwell | 0.2% Offset Yield Strength psi | Ultimate Tensile Strength psi | Percent Elongation in 2 inches |
B85 | 100,000 | 100,000 | 50 |
N | P | Cr | C | Mn | S | Si |
8-10 | 0.045 max | 17-19 | 0.15 max | 2.00 max | 0.030 max | 1.00 max |
Origin of Material
![]() |
![]() |
![]() |
![]() |
ThyssenKrupp |
Jindal |
Aperam |
Posco |
![]() |
![]() |
![]() |
![]() |
Outokumpu |
ArcelorMittal |
Nippon Steel & Sumitomo Metal |
JFE Steel |