ASTM A240 Type 347H Plate Supplier at reasonable rate, view SS 347h Plate Weight and Thickness
Table Of Content
SS 347H is an austenitic grade of SS. 347h Stainless Steel Sheet is stabilized by columbium and tantalum exhibiting an outstanding chemical concentration of chromium and nickel content similar to the SS 304 grade. The SS 347h Sheet has excellent resistance against intergranular corrosion after being exposed to temperatures ranging up to 1500 degrees F.
The 347h Stainless Steel Plate shows excellent resistance to carbide precipitation in high-temperature service systems. The excellent strength coupled with superb mechanical properties makes the SS 347h Plate a component of choice in stress-induced environments. These plate show higher creep and stress rupture properties and are utilized in applications where sensitization is of the highest degree.
What is Thickness Range of SS 347h Plate?
plate in the SS 347h grade are utilized in providing structural support and strength to different modules. The SS 347h Plate Thickness is above 6mm, which goes up to 150mm.
As Exporter and Stockist Get Quick delivery of ASME SA240 UNS S34709 Perforated Sheet in size of 3mm/2mm or custom, check sizes and Density
347h Stainless Steel Density
Offer UNS S34709 Strip and Coil using the highest quality resources and according to industry requirements, see Welding 347h Stainless Steel
Welding 347h Stainless Steel
Stainless steel 347h is a high carbon module designed to be utilized in high-temperature systems. The carbon content makes welding these modules a little difficult. However, they can be welded following general welding procedures. These steels modules are resistant to intergranular corrosion after welding due to the presence of columbium and tantalum in their chemical concentration. These modules don’t respond well to heat treatment, however, they can be readily hardened by cold working procedures.
Are you looking for Dealer and Distributors of Werkstoff No 1.4961 Foil and Shim Sheet ? this is the end of your search, view 347h Stainless Steel Sheet vs Coil
Diffrences Between 347h Stainless Steel Sheet And Coil
347h Sheets and coils are two important modules in this grade. Both these modules have their own functionality and structure. Werkstoff No 1.4961 Coil is rolled or wound after the initial procedure, allowing them to be transported to different locations easily. These modules can be sheared into SUS 347H Foil,which is the thinnest module within this grade. This allows the components to be robust and pliable during transport. The UNS S34709 Strip is another component that can be sheared from the coil having widths of above 600mm having a thickness between 1.2mm to 20mm.
ASME SA240 347 Stainless Steel Sheet is a component designed, with a thickness of less than 6mm. These modules are weight-saving components that provide an aesthetical appeal to the component, like the SS 347 Perforated Sheet. These sheets have holes of different shapes and sizes punched through them manually or mechanically by CNC machines. Similar to these sheets, the ASTM A240 Type 347H Plate is an alternative module that is employed to provide added strength and durability across the different modules. To provide stability, and structure the, SS 347H Shim Sheet is placed between metal structures.
These shim sheets can be designed with different dimensions ensuring the item is properly supported. The Stainless Steel 347H hot Rolled Plate, similar to the other components, are subjected to heating at extreme temperatures in mills allowing them to be shaped precisely. UNS S34700 Cold Rolled Plate is further processed after this stage, ensuring the quality of the end product is enhanced.
Please enter values then click on Calculate.
Description | Price |
347h 0.5mm Thick Steel Plate | US $ 1500-2500 / Ton |
Hr SS Plate 347H | US $ 299-499 / Ton |
10mm 8mm 12mm 15mm Thickness 347H Stainless Steel Sheet | US $ 1650-2600 / Ton |
2mm Thick 347H stainless Steel Sheet | US $ 900-1600 / Ton |
20mm Thick Cold Rolled Stainless Steel 347H Sheet | US $ 1800-2200 / Ton |
Cold Rolled 4*8 Polished Colored 347H Marine Ss Plate | US $ 1000-1800 / Ton |
1mm 2mm SUS 347H Stainless Plate | US $ 1650-2600 / Ton |
Cold Rolled Stainless Steel 347H Plate | US $ 800-2000 / Ton |
Standard Specifications | ASTM A240 / ASME SA240 |
Thickness Available | 4 to 100mm |
Width We manufacture |
1500mm, 3000mm, 2000mm, 2500mm, 1000mm, 1219mm, 1800mm, 3500mm etc |
Stock Length | 2440mm, 2000mm, 5800mm, 6000mm, 3000mm etc |
Plate form accessible | Foils, Plain Sheet, Flats, Coils, Shim Sheet, Rolls, Chequered Plate, Strip, Perforated Sheet, Blank (Circle),Ring (Flange) etc. |
Mechanical Surface Finishing | etching, NO.1, hair line, Brush, embossed, 2D, 2B, NO.8, BA, 8K, checkered, NO.4, mirror, sand blast etc |
Provide Plate Finish | Cold rolled sheet (CR), BA NO(8), Hot rolled plate (HR), 2B, SATIN (Met with Plastic Coated), 2D |

347H Stainless Steel Sheet

ASTM A240 Type 347 Plate

SS 347H Perforated Sheet

UNS S34709 Coil

Werkstoff No 1.4961 Strip

Stainless Steel 347H Hot Rolled Plate
Check out our inventory of Stainless Steel 347H hot Rolled and Cold Rolled Plate For Sale at a reasonable cost, see SS 347h Grade Chemical Composition
View SS 347h Grade Chemical Composition
SS 347h grade is designed with an excellent chemical composition comprising of 17-19% chromium, 9-13% nickel, 0.08% carbon, and 2% manganese. Apart from this, it has constituents of 0.03% sulfur, 0.75% silicon, a balanced iron content, and 8 x (C + N) min.-1.00 max columbium and tantalum content.
1 1/2" | 1 1/4" | 1 3/4" | 3 1/2" | 2 1/4" | 2" | 2 3/4" | 2 1/2" | 3" | 4" |
---|---|---|---|---|---|---|---|---|---|
38.1mm | 31.8mm | 44.5mm | 88.9mm | 57.2mm | 50.8mm | 69.9mm | 63.5mm | 76.2mm | 101.6mm |
1/4" | 3/16" | 5/16" | 1" | 1/2" | 3/8" | 3/4" | 5/8" | 7/8" | 1 1/8" |
6.3mm | 4.8mm | 7.9mm | 25.4mm | 12.7mm | 9.5mm | 19mm | 15.9mm | 22.2mm | 28.6mm |
(APPROXIMATE INCHES) | METAL GAUGE | NOMINAL DECIMAL (+/- INCHES) |
0.1644 | 8 | 0.0080 |
0.1793 | 7 | 0.0080 |
0.1345 | 10 | 0.0070 |
0.1196 | 11 | 0.0050 |
0.1495 | 9 | 0.0080 |
0.1046 | 12 | 0.0050 |
0.0179 | 26 | 0.0015 |
0.0747 | 14 | 0.0040 |
0.0673 | 15 | 0.0040 |
0.0897 | 13 | 0.0050 |
0.0598 | 16 | 0.0030 |
0.0478 | 18 | 0.0030 |
0.0538 | 17 | 0.0030 |
0.0418 | 19 | 0.0030 |
0.0329 | 21 | 0.0025 |
0.0359 | 20 | 0.0030 |
0.0299 | 22 | 0.0020 |
0.0239 | 24 | 0.0020 |
0.0269 | 23 | 0.0020 |
0.0149 | 28 | 0.0010 |
0.0209 | 25 | 0.0015 |
LB/Sq. Ft. | Gauge | LB/Sq In. | Gauge Tolerance | ||
---|---|---|---|---|---|
96″ Wide | 72″ Wide | ||||
8.579 | 3/16 | 0.1875 | 0.05958 | +.050″ -.010″ | +.045″ -.010″ |
9.870 | 7/32 | 0.2187 | 0.06854 | ||
11.162 | 1/4 | 0.2500 | 0.07750 | ||
13.746 | 5/16 | 0.3125 | 0.09546 | ||
16.496 | 3/8 | 0.3750 | 0.11456 | +.060″ -.010″ | +.055″ -.010″ |
19.080 | 7/16 | 0.4375 | 0.13250 | ||
21.633 | 1/2 | 0.5000 | 0.15044 | ||
24.247 | 9/16 | 0.5625 | 0.16838 | ||
26.831 | 5/8 | 0.6250 | 0.18633 | ||
29.415 | 11/16 | 0.6875 | 0.20427 | ||
32.123 | 3/4 | 0.7500 | 0.22308 | +.065″ -.010″ | +.060″ -.010″ |
34.707 | 13/16 | 0.8125 | 0.24102 | ||
37.291 | 7/8 | 0.8750 | 0.25897 | ||
39.875 | 15/16 | 0.9375 | 0.27691 | ||
42.665 | 1 | 1.0000 | 0.29628 | +.075 -.010″ | +.070″ -.010″ |
47.833 | 1-1/8 | 1.1250 | 0.33217 | ||
53.001 | 1-1/4 | 1.2500 | 0.36806 | ||
58.169 | 1-3/8 | 1.3750 | 0.40395 | ||
63.337 | 1-1/2 | 1.5000 | 0.43984 | ||
73.672 | 1-3/4 | 1.7500 | 0.51161 | ||
84.008 | 2 | 2.0000 | 0.58339 | +.150″ -.010″ | +.125″ -.010″ |
89.610 | 2-1/8 | 2.1250 | 0.62229 | ||
94.777 | 2-1/4 | 2.2500 | 0.65817 | ||
105.113 | 2-1/2 | 2.5000 | 0.72995 | ||
115.449 | 2-3/4 | 2.7500 | 0.80173 | ||
126.301 | 3 | 3.0000 | 0.87709 | +.160″ -.010″ | +.150″ -.010″ |
146.972 | 3-1/2 | 3.5000 | 1.02064 | ||
168.264 | 4 | 4.0000 | 1.16850 | +.200″ -.010 | +.180″ -.010″ |
SS | |||||||
---|---|---|---|---|---|---|---|
Size Of Sheets | 1.2 | 0.9 | 2.0 | 1.5 | 4.0 | 3.0 | 5.0 |
2500x1250 | 30 | 22.5 | 50 | 37.5 | 100 | 79 | 132 |
2000x1000 | 20 | 14.4 | 32 | 24 | 64 | 50 | 84 |
3000x1500 | 43 | 72 | 54 | 144 | 113 | 189 |
Yield Strength 0.2% Offset |
Ultimate Tensile Strength |
Elongation in 2 in. |
Hardness | ||
---|---|---|---|---|---|
30,000 psi (min.) | 205 (MPa) | 75,000 psi (min.) | 515 (MPa) | 40 % (min.) | 201 Brinell (max.) |
Physical Properties | |
Density ( g.cm-3 ) | 7.93 |
Melting point (°C ) | 1400-1425 |
Electrical Properties | |
Electrical resistivity ( µOhm.cm ) | 70 to 73 |
Thermal Properties | |
in air Maximum use temperature( °C ) | |
Coefficient of thermal expansion ( x10-6 K-1 ) | 16 to 18 @ 20 to 100°C |
Element | 347H |
---|---|
Chromium (Cr) | min 17.00 - max 19.00 |
Nickel (Ni) | min 9.00 - max 13.00 |
Carbon (C) | min 0.04 - .max 0.10 |
Manganese (Mn) | 2.00 |
Phosphorous (P) | 0.045 |
Sulfur (S) | 0.03 |
Silicon (Si) | 0.75 |
Tantalum & Columbium | min 8 x (C + N) - max 1.00 |
Iron (Fe) | Balance |
- High pressure steam pipes
- Heat exchanger tubes
- High temperature chemical processes
- Boiler tubes
- High temperature steam service
- General refinery piping
- Radiant superheaters
- Heavy duty exhaust systems