Nitronic 60 Plate Supplier

Trusted Astm A240 Alloy 60® Plate Suppliers in India, view Ams 5848 Plate Price

Nitronic 60 is an austenitic nitrogen grade. The Nitronic 60 Plate is designed with a superior chemical composition of chromium, nickel, manganese, molybdenum, silicon, nitrogen, niobium, carbon, vanadium, sulfur, and iron. The content embedded in these plates gives them enhanced corrosion and oxidation resistance properties. The N-60 plate works well in both sub-zero and elevated temperature setups. These plates have the capability to retain low magnetic permeability when working in difficult temperatures. The versatile ALLOY 218 plate has a density of 7.89g/cm3 with excellent mechanical properties.

These plates have a minimum tensile strength of 689mpa with a minimum yield strength of 379mpa and can be easily elongated at the break of 35% in the system. The AMS 5848 Plate requires slower speeds, positive feeds, and resulfurized lubricant to machine them correctly. These plates can be readily formed utilizing standard forming techniques. ASTM A240 Alloy 60® Plate has good resistance to wear, fretting and galling. These plates can be cold rolled to give them higher strengths.

They are commonly seen in marine hardware, aircraft equipment, roller bearings, fastening systems, bushings, rings, etc. The plates provide a low-cost alternative to expensive nickel and cobalt-based alloys to fight wear and tear in the system. The UNS S21800 Sheet is a grade that is slightly thinner than a plated metal. These sheets are used to add an aesthetical appeal to the modules rather than providing strength and stability. Our institution is a top nitronic 60 plate supplier who can supply quality assured products. Our tie-ups with several logistical and supply chain systems allow us to deliver products to your place on short notice.

Nitronic 60 Plate Specification

ASME/ASTM Grade	ASTM A240 / ASME SA240
Grade	Nitronic 60
Width Available	1800mm, 3000mm, 1500mm, 2000mm, 1000mm, 2500mm, 1219mm, 3500mm etc
Thickness	4mm - 100mm
Supply Length	2000mm, 2440mm, 6000mm, 5800mm,3000mm etc
Most Commom Finish	SATIN (Met with Plastic Coated), 2B, Cold rolled sheet (CR), BA NO(8), Hot rolled plates (HR), 2D
Surface types	sand blast, etching, NO.1, embossed, hair line, 2B, Brush, BA, 2D, checkered, NO.8, 8K, NO.4, mirror, etc
Available Plates Form with us	Foils, Perforated Sheet, Plain Sheet, Coils, Rolls, Flats, Shim Sheet, Chequered Plates, Strip, Blank (Circle), Ring (Flange) etc.

 

Astm A240 Alloy 60® Plate Price

Description	Price
Nitronic 60 Stainless Steel Plates	US $ 10000-35000 / Ton
Nitronic 60 (Alloy 218, UNS S21800) Alloy Plates	US $ 32 / kg
Nitronic 60 Plain Hot Rolled Alloy Sheet	US $ 20 / kg
Nitronic 60 Cold Rolled Strip Stainless Steel Coil	US $ 15 / kg
Nitronic 60 Sheet Metal 2b Finish	US $ 2800-3000 / Ton
Nitronic 60 (UNS S21800) Plates	US $ 10-100 / kg
Nitronic 60 Hot Rolled Stainless Steel Coil Strip	US $ 15 / kg
Nitronic 60 Plates/Sheets/Coils/Strips (UNS S21800, Nitronic60, Alloy 218)	US $ 1 / Piece

 

Ams 5848 Wear and Calling Properties

Self-Mated Wrought Alloys Wear Compatability
Grade	Hardness	Weight Loss
	Rockwell	Mg / 1000 cycles
		415 rpm	105 rpm
Nitronic 60	B95	1.58	2.79

 

Self-Mated Stainless Metals Wear Compatability
Grade	Hardness	Weight Loss
	Rockwell	Mg / 1000 cycles
		415 rpm	105 rpm
Nitronic 60	B95	1.58	2.79

 

Nitronic 60 Plate Types

Nitronic 60 Plates

Astm A240 Alloy 60® Plates

Ams 5848 Plates

Uns S21800 Sheet

N-60 Plates

Alloy 218 Plates

 

We deliver Uns S21800 Sheet with Exceptional sizes, standard, and Quality, call us to know more about Ready stock

 

Uns S21800 Dynamic Coefficient of Friction

Test Stress Level, MPa
	28.0	5.6	0.8	14.0	112.0	56.0
Nitronic 60	0.44	0.35	0.50	0.38	0.44	0.44

 

Unlubricated Calling Resistance of N-60 Plate

Grade	Condition	Hardness	Nitronic
		HB	60
Nitronic 60	Annealed	205	+

 

Alloy 218 Plate Sizes

SS
Size Of Sheets	1.2	0.9	2.0	1.5	4.0	3.0	5.0
2500x1250	30	22.5	50	37.5	100	79	132
2000x1000	20	14.4	32	24	64	50	84
3000x1500	43		72	54	144	113	189

 

Nitronic 60 Plate Weight Chart

Weight per sheet (Kg)	Size (mm)	Weight per sheet (Kg)	Size (mm)
17.9	2500 x1250 x 0.7	55.3	3000 x 1500 x 1.5
11.5	2000 x1000 x 0.7	38.4	2500 x 1250 x 1.5
14.7	2000 x1000 x 0.9	32.7	2000 x 1000 x 2.0
16.4	2000 x1000 x 1.0	73.7	3000 x 1500 x 2.0
23.0	2500 x1250 x 0.9	51.2	2500 x 1250 x 2.0
36.8	3000 x1500 x 1.0	63.9	2500 x 1250 x 2.5
25.6	2500 x1250 x 1.0	40.9	2000 x 1000 x 2.5
19.6	2000 x1000 x 1.2	92.1	3000 x 1500 x 2.5
44.2	3000 x1500 x 1.2	77.5	2500 x 1250 x 3.0
30.7	2500 x1250 x 1.2	49.6	2000 x 1000 x 3.0
24.6	2000 x1000 x 1.5	112.0	3000 x 1500 x 3.0

 

Stockist of N-60 Plate in Mumbai at any specifications that the clients, Enquire Today !!

N-60 Plate Weight Calculator

Please enter values then click on Calculate.

Length (inches) =

Width (inches) =

Thickness (inches) =

 

Weight (pounds) =

All weights are estimates; actual weights may differ.

 

Alloy 60® Plate Thickness

Thickness	Size Range	Thickness	Surface Area per Unit weight		Approx Weight per Sheet
inches		mm	kg/m²	lbs/ft²	kg	lbs
0.015	36 x 120	0.381	3.07566	0.630	8.5617	18.90
0.015	36 x 96	0.381	3.07566	0.630	6.84936	15.12
0.0178	36 x 120	0.45212	3.690792	0.756	10.27404	22.68
0.0178	36 x 96	0.45212	3.690792	0.756	8.22195	18.15
0.0178	48 x 120	0.45212	3.690792	0.756	13.69872	30.24
0.0178	48 x 96	0.45212	3.690792	0.756	10.95807	24.19
0.0235	30 x 120	0.5969	4.921056	1.008	11.4156	25.20
0.0235	30 x 96	0.5969	4.921056	1.008	9.13248	20.16
0.0235	36 x 120	0.5969	4.921056	1.008	13.69872	30.24
0.0235	36 x 96	0.5969	4.921056	1.008	10.95807	24.19
0.0355	36 x 96	0.9017	7.381584	1.512	16.43937	36.29
0.0235	48 x 96	0.5969	4.921056	1.008	14.61378	32.26
0.0235	36 x 144	0.5969	4.921056	1.008	16.43937	36.29
0.0235	48 x 120	0.5969	4.921056	1.008	18.26496	40.32
0.0291	30 x 96	0.73914	6.15132	1.260	11.4156	25.20
0.0235	48 x 144	0.5969	4.921056	1.008	21.92067	48.39
0.0291	30 x 120	0.73914	6.15132	1.260	14.2695	31.50
0.0291	36 x 120	0.73914	6.15132	1.260	17.1234	37.80
0.0291	36 x 96	0.73914	6.15132	1.260	13.69872	30.24
0.0355	30 x 96	0.9017	7.381584	1.512	13.69872	30.24
0.0291	36 x 144	0.73914	6.15132	1.260	20.55261	45.37
0.0291	48 x 120	0.73914	6.15132	1.260	22.83573	50.41
0.0291	48 x 96	0.73914	6.15132	1.260	18.26496	40.32
0.0291	48 x 144	0.73914	6.15132	1.260	27.40197	60.49
0.0355	30 x 120	0.9017	7.381584	1.512	17.1234	37.80

 

We Guarantee Fastest Delivery Alloy 218 Plate with All Documents Including Mill Certificate

 

Ams 5848 Plates Chemical Composition

Grade Nitronic 60	Si	N	C	Ni	Mn	Cr	S
MIN	3.5	0.08	0.10	8.0	7.0	16.0	0.030
MAX	4.5	0.18	–	9.0	9.0	18.0	–

 

Uns S21800 Sheet Mechanical Properties

Nitronic 60	Condition	Yield Strength (0.2%) ksi	Ultimate Tensile Strength (ksi)	Reduction of Area %	Elongation in 4D (%)	Hardness HB
	(AMS 5848)>0.5″ Solution Treated	50	95	55	35	170-255
	(AMS 5848) <0.5″ Solution Treated	55	105	55	35	170-255

Alloy 218 Plate Equivalent

STANDARD	UNS	WERKSTOFF NR.
Nitronic 60	S21800	–

 

We have a large inventory of Nitronic 60 Plate According to Standard in almost all length at guaranteed best price in India

 

Astm A240 Alloy 60® Plate Applications

• Roller bearings
• Pins and bushings
• Fasteners
• Wear rails
• Pump components