430 Stainless Steel Sheet

 

ASTM A240 SS 430 Plate Supplier in India using National and international quality standards, view Thickness

430 Stainless Steel Sheet

 

 

What is 430 Stainless Steel Sheet?

Stainless 430 belongs to ferritic stainless grade. The 430 Stainless Steel Sheet non-hardenable steel component is designed with an excellent chemical composition consisting of chromium with small additions of nickel. This 430 SS Sheet offers excellent corrosion and oxidation resistance in an array of stress-induced environments. The highly tolerant 430 Grade Stainless Steel Sheet shows enhanced resistance to cracking by organic, acetic, nitric, and phosphoric acids.

The components of the SS 430 Sheet perform well at different temperatures. It tends to withstand oxidation at high temperatures, however, they usually end up turning brittle at these temperatures. A SS 430 Plate exhibits superior mechanical properties having a minimum tensile strength of 483Mpa with a yield strength of minimum 310Mpa. The 430 Stainless Steel Plate can be elongated by a minimum of 22% while exhibiting a maximum hardness of 85 HR B. The high carbon content in the Stainless Plate 430 gives these modules poor weldability compared to most other stainless steel grades.

430 Stainless Steel Sheet

 

Thickness difference between 430 Stainless Steel Sheet and Plate

SS sheets and plates are the two most common shaped components within this stainless grade. The thickness of a SS 430 plate is above 6mm. These modules are utilized in providing rigidity and support to different modules. A 430 Stainless Steel Sheet Thickness is less than 6mm. These components are devised to provide an aesthetical appeal to the module along with weight saving.

 

430 Stainless Steel Sheet For Sale, We can supply UNS S43000 Strips and Coil with customized sizes, view Price and Hs Code

 

AISI 430 Cold Rolled Plate Price in india

Description Price
430 Stainless Sheet with High Quality US $ 900-2000 / Ton
430 0.6mm 0.8mm 1.0mm 1.2mm Perforated Stainless Sheet US $ 2000-2500 / Ton
Cold Rolled SS 430 Stainless Sheet US $ 2100-2250 / Ton
430 2mm 3mm 5mm Thick Half Hard Stainless Sheet US $ 2000-2500 / Ton
430 Grades Stainless Sheet with Different Surfaces US $ 2800-2877 / Ton
430 Stainless Cold Rolled Sheet 0.1mm~50mm US $ 1300-1400 / Ton
430 1.0mm Thick Half Hard Stainless Strip Coils US $ 850-1200 / Ton
430 Cold Rolled Stainless Sheet US $ 2000-2500 / Ton
430 Grade 2b Finish Cold Rolled Stainless Coil/Sheet US $ 1300-1600 / Ton

 

Are You looking for Price Difference of 430 SS Sheet in india and Uk?

Prices of steels are dependant on supply, demand, and various other factors. A Stainless Steel 430 hot Rolled Plate exhibiting a thickness of 0-1mm can be manufactured with a price starting price at $2.9 to $3.5. The price for an AISI 430 Cold Rolled Plate will be substantially higher depending on the different procedures and constituents utilized in manufacturing the module. The Werkstoff No 1.4016 Coil designed with a thickness ranging between 0.5mm, to 3mm costs, between $2.6 to $3.2.

These coils can be employed to shear a SUS 430 Foil. The thinnest modules within this grade the components are effective in covering and protecting different items in the system. A SS 430 Perforated Sheet starts at $1.7 to $2 per kg. The prices are dependant on the stamping procedures and size or the complexity of the shapes. The 430 Stainless Steel Sheet Suppliers Uk imports steel from different countries, making the cost of these items higher than India.

 

430 Stainless Steel Plate Specification

Material Grade SS 430
Standard
AISI, JIS, ASTM, EN, DIN, GB,
Type Coil, Plate
Thickness 0.5 upto 5 mm
Length 500 mm - 6000 mm
Width 1000 mm - 1250 mm
Surface Treatment Cold Rolled
Surface Finish
BA/2B/NO.1/HL/8K/NO.4/6K

 

430 SS Sheet Weight calculator

Please enter values then click on Calculate.

Length (inches) =
Width (inches) =
Thickness (inches) =
 
Weight (pounds) =

All weights are estimates; actual weights may differ.

 

430 Stainless Steel Sheet Supplier and Stockist & Exporter of Werkstoff No 1.4016 Perforated Sheet and Foil on a huge scale all across the universe, see 430 stainless steel vs 304

 

430 Stainless Steel vs 304

Stainless 430 and 304 belong to two different spectrums in the stainless grade. 

  •   A 430 SS Plate is designed with a chemical composition of 16-18% chromium and 0.50% nickel. A 304 has a chemical content of 18% chromium coupled with 8% nickel.
  •   The ASTM A240 Type 430 Plate offers limited weldability compared to the excellent weldability offered by the 304 grade.
  •   The 304-grade components can be hardened but, the ASME SA240 430 Stainless Sheet cannot be hardened.
  •   Having a maximum intermittent service temperature of 850 degrees C, the 304 grade shows high ductility and formability. The SS 430 Shim Sheet is less ductile and formable compared to this grade.
  •   The austenitic 304 grade is more expensive when put in direct comparison with the ferritic UNS S43000 Strip.


If you're looking for a AISI 430 Hot / Cold Rolled Plate and Shim Sheet Supplier in UK, Triton is here to help. get Weight Calculator online

 

Basic Types of 430 SS Sheet

430 Stainless Steel Sheet
430 Stainless Steel Sheet
430 Stainless Steel Plate
430 Stainless Steel Plate
430 SS Sheet
430 SS Sheet
ASTM A240 Type 430 Perforated Sheet
ASTM A240 Type 430 Perforated Sheet
UNS S43000 Strip
UNS S43000 Strip
Werkstoff No 1.4016 Coil
Werkstoff No 1.4016 Coil

 

430 Stainless Steel vs 316

 Stainless 316 grade is designed with a superior chemical concentration of chromium, nickel, and molybdenum. In comparison, the SS 430 shows the presence of higher chromium content and a small amount of nickel. The excellent chemical composition gives the 316 grade higher tolerance and resistance across different stress-induced environments compared to the 430 grade. The 316 stainless grade has better mechanical properties, however, the thermal properties of both these grades are identical. The 430 grade is cheaper in comparison to the 316 SS grade.

 

430 Stainless Steel Sheet Thickness

1 1/2" 1 1/4" 1 3/4" 3 1/2" 2 1/4" 2" 2 3/4" 2 1/2" 3" 4"
38.1mm 31.8mm 44.5mm 88.9mm 57.2mm 50.8mm 69.9mm 63.5mm 76.2mm 101.6mm
1/4" 3/16" 5/16" 1" 1/2" 3/8" 3/4" 5/8" 7/8" 1 1/8"
6.3mm 4.8mm 7.9mm 25.4mm 12.7mm 9.5mm 19mm 15.9mm 22.2mm 28.6mm

 

430 Stainless Steel Plate Suppliers, Know more about SS 430 Sheet Properties and Dimensions

 

Why 430 Stainless is Considered as food grade?

430 stainless is designed with a superior chemical content of chromium with a fraction of nickel content making its highly resistant to corrosion. The grade shows enhanced resistance in nitric and organic acids, which are predominant within the food industry. Its tolerance to sulfur and oxidation further boasts its resistance in these media. The magnetic modules offer extraordinary stress-corrosion cracking tolerance while performing well at high temperatures, making them an excellent choice in the food industry.

 

Werkstoff No 1.4016 Plate Dimensions

Surface Finish Thick (mm) Length (mm) Width (mm)
BA, 2B, NO.8, NO.4, HL 0.3 2000, 2438, other 1000, 1219
BA, 2B, NO.8, NO.4, HL
0.4 2000, 2438, other 1000, 1219
BA, 2B, NO.8, NO.4, HL
0.5 2000, 2438, other 1000, 1219
BA, 2B, NO.8, NO.4, HL
0.6 2000, 2438, other 1000, 1219
BA, 2B, NO.8, NO.4, HL
0.7 2000, 2438, other 1000, 1219
BA, 2B, NO.8, NO.4, HL
0.8 2000, 2438, other 1000, 1219
BA, 2B, NO.8, NO.4, HL
0.9 2000, 2438, other 1000, 1219
BA, 2B, NO.8, NO.4, HL
1.0 2000, 2438, other 1000, 1219
BA, 2B, NO.8, NO.4, HL
1.2 3000, 2000, 2438, other 1500, 1000, 1219
BA, 2B, NO.8, NO.4, HL
1.5 3000, 2000, 2438, other
1500, 1000, 1219
BA, 2B, NO.8, NO.4, HL
2.0 3000, 2000, 2438, other
1500, 1000, 1219
BA, 2B, NO.8, NO.4, HL
2.5 3000, 2000, 2438, other
1500, 1000, 1219
BA, 2B, NO.8, NO.4, HL 3.0 3000, 2000, 2438, other
1500, 1000, 1219

 

SS 430 Plate Mechanical Properties

Density range 7.75 g/cm³
Melting range 1425-1510 °C
Thermal Expansion 10.4 x10^-6 /K
Modulus of Elasticity GPa 200
Electrical Resistivity 0.60 x10^-6 Ω .m
Thermal Conductivity 23.9 W/m.K

 

EN 10088-2:2005 Up to 8mm Thick Sheet

Proof Strength 260 MPa Min
Tensile Stress MPa 450 - 600
Elongation A50 mm 20 Min %

 

EN 10088-2:2005 Over 8mm to 13.5mm / Thick Plates

Proof Stress MPa 240 Min
Tensile Strength MPa 450 - 600 MPa
Elongation A50 mm 18 Min %

 

EN 10088-2:2005 Over 13.5mm to 25mm Thick Plates

Proof Stress MPa 240 Min MPa
Tensile Strength MPa 430 - 630 MPa
Elongation A50 mm 20 Min %

 

ASTM A240 Type 430 Plate Equivalent

Grade AISI WERKSTOFF NR. UNS BS AFNOR IS SIS JIS UNI
SS 430 430 1.4016 S43000 430 S 17 Z 8 C 17 X10 Cr 17 142320 SUS 430 X12Cr17C

 

SS 430 Sheet Chemical Composition

Element % Present
(C) 0.0 - 0.08
(Cr) 16.00 - 18.00
(Mn) 0.0 - 1.00
(Si) 0.0 - 1.00
(P) 0.0 - 0.04
(S) 0.0 - 0.02
(Fe) Balance

 

Hs Code of 430 Stainless Steel Sheet

HS Code Description
72192211 4M X 430MM X 0.3MMT 430 STAINLESS STEEL SHEET
72199013 430/2B/TRIM EDGE COLD ROLLED STAINLESS STEEL SHEETS 2.000MMX1250MMX2500
72199013 2MMX1250MMX2500 -430 COLD ROLLED STAINLESS STEEL WIDE SHEETS
73259930 STAINLESS STEEL SHEET 430
72189990 2B FINISH 2.5MM THK X 260MM WIDTH X 1220MM LENGTH 430 STAINLESS STEEL SHEET
72199012 3.000MMX1250MMX2500 430 COLD ROLLED STAINLESS STEEL WIDE SHEETS

 

UNS S43000 Strip Application

  • Lashing Wire
  • Refrigerator Cabinet Panels
  • Linings for Dish Washers
  • Chimney Liners
  • Stove Trim Rings
  • Element Supports
  • Automotive Trim
  • Fasteners