buy Cut to Size ASTM A240 Type 316ti Plate in Large or Small Quantities Online, check SS 316ti Plate Weight
Table Of Content
316ti is a titanium stabilized stainless steel. The 316ti Stainless Steel Plate is designed with a superior chemical concentration of chromium, nickel, and molybdenum. The excellent concentration allows these modules to have enhanced corrosion and oxidation resistance properties. SS 316ti plate offers enhanced resistance to pitting by chlorides in seawater.
These high-grade components show higher creep-rupture and stress-rupture properties. A 316ti Stainless Steel Sheet shows resistance to sensitization at temperatures up to 900 degrees F due to the presence of titanium in its composition. Designed with outstanding mechanical properties and strength, the SS 316ti sheet can suffice in a range of stress-induced environments.
full line Stocking Distributor and Wholesaler of top quality ASME SA240 UNS S31635 Strip in India and around the world, see SS 316ti vs 316l
316ti and 316l are an evolution of the 316 grade. The 316ti shows the presence of titanium to fight corrosion in high-temperature heat-affected zones. 316l on the other hand is a low carbon version utilized to limit carbide precipitation after welding procedures.
Triton has proved itself as the most reliable stockholder, dealer, and exporter of Werkstoff No 1.4571 Coil and Foil, We will deliver your order right away if you order today.
SS 316ti Coil VS Foil
Coils and Foils are components of the SS 316ti grade. These modules have distinct characteristics which help in differentiating them.
- SUS 316Ti Foil is the thinnest metal component within this grade. Designed with a thickness of less than 0.2mm, these modules can be used to cover different products against damage.
- Werkstoff No 1.4571 Coil is a metal module that is wound after it is rolled. Designed in thicknesses between 1.2mm to 20mm, these components can be readily transported across different locations.
specifications |
ASTM A240 / ASME SA240, EN 10088-2 |
|---|---|
Stainless Steel 316ti Sheet Standard |
ASME, ASTM, DIN, BS, EN |
Thickness |
1 to 200mm |
Length |
2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
Surface |
2B, etching, BA,, NO.4, NO.8, Brush, NO.1, mirror, 8K, hair line, embossed, 2D, checkered, sand blast, etc |
Origin |
Indian Origin, European Origin, Japanese Origin, US Origin, Japanese Origin, X Thailand Origin, Taiwan Origin |
Technique |
Cold Rolled and Hot Rolled |
Width |
1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm etc |
Stainless Steel 316 Sheet Finish |
Cold rolled sheet (CR), SATIN (Met with Plastic Coated), BA NO(8), Hot rolled plate (HR), 2B, 2D |
MTC |
Available as per EN 10204 3.1, Mill Test Certificate |
Brand Name |
Jindal Stainless, Outokumpoo, TISCO, POSCO, North American Stainless, Aperam,Thyssenkrup |
Container |
40ft HC: 12032m |
Form |
Coils, Foils, Shim Sheets, Rolls, Plain Sheets, Ring (Flange), Strip, Perforated Sheets, Blank (Circle), Chequered Plate, Flats, etc. |
| Price term | CFR, Ex-Work, FOB, CNF, CIF |
Size |
40ft GP: 12032mm x 2352mm x 2393mm |
| 20ft GP: 5898mm x 2352mm x 2393mm |
| Description | 316ti Stainless Steel Sheet Price |
| Cold Rolled 316ti Stainless Steel Sheet | US $ 1600-1800 / Ton |
| 316ti Stainless Steel Sheet | US $ 520-920 / Ton |
| 2b Polishing Plate 316ti | US $ 1300-2500 / Ton |
| 316ti Stainless Steel Sheet for Food Industry | US $ 1500-4000 / Ton |
| Hot/Cold Rolled 316L Stainless Steel Sheet | US $ 800-1448 / Ton |
| AISI 316ti 2b Finish Stainless Steel Plate/Sheet | US $ 4200-6446 / Ton |
| AISI 316ti SS Perforated Sheet | US $ 2499 / Ton |
| 316ti Hairline Finish 4' X 8' X 1.5 mm Stainless Steel Sheet | US $ 1000-2000 / Ton |
Request for our latest prices SS 316Ti Perforated and Shim Sheet available in Custom finish, size, dimensions and thickness
What is gap betweeen SS 316ti Plate Price in india and UK
The prices of steel components are dependent on supply and demand. SS 316ti Plate Price in India is around $3.50 to $3.70. The prices in UK vary from $5.70 to $5.90. With the demand for these components on the high, the SS 316ti Sheet Price keeps fluctuating regularly.
What Exactly Thickness Difference In Between 316ti Stainless Steel Plate Vs Sheet
Plates and sheets are the basic shapes within a metal grade. Apart from this, two the UNS S31635 Strip is another module that is a feature of most grades of stainless steel. These modules can be manufactured following distinct processes. A 316Ti SS hot Rolled Plate is processed at high temperatures in mills allowing the subsequent metal to be drawn and formed more easily. The Stainless Steel 316Ti Cold Rolled Plate is rolled after the hot-rolling process.
Plates and sheets during this method are processed to achieve superior or desired properties. The major differentiating factor between a plate and sheet within this grade is their thickness. ASTM A240 Type 316ti Plate is designed with a thickness of more than 6mm. These high-strength modules provide excellent stability and support to the module they are attached to. ASME SA240 316ti Stainless Steel Sheet is designed in thickness less than 6mm. Sheets are employed in devices that require less stability. They are also employed to give an aesthetical appeal to the structure, like the SS 316Ti Perforated Sheet.
Please enter values then click on Calculate.
316ti Stainless Steel Sheet
SS 316ti Perforated Sheet
316ti Stainless Steel Plate
UNS S31635 Strip
Werkstoff No 1.4571 Coil
ASTM A240 Type 316ti Foil
EN 10029 Class A/ Class B
| 316ti Stainless Steel Sheet Nominal thickness in mm | nominal thickness Tolerances | |||
|---|---|---|---|---|
| Class B | Class A | |||
| Lower | Upper | Lower | Upper | |
| > 3 < 5 mm | -0.3 | +0.9 | -0.4 | +0.8 |
| > 5 < 8 mm | -0.3 | +1.2 | -0.4 | +1.1 |
| > 8 < 15 mm | -0.3 | +1.4 | -0.5 | +1.2 |
| > 15 < 25 mm | -0.3 | +1.6 | -0.6 | +1.3 |
| > 25 < 40 mm | -0.3 | +1.9 | -0.8 | +1.4 |
| > 40 < 80 mm | -0.3 | +2.5 | -1.0 | +1.8 |
| > 80 < 150 mm | -0.3 | +2.9 | -1.0 | +2.2 |
| > 150 < 250 mm | -0.3 | +3.3 | -1.2 | +2.4 |
EN 10029 Class C / Class D
| Nominal thickness in mm | nominal thickness Tolerances | |||
|---|---|---|---|---|
| Class D | Class C | |||
| Lower | Upper | Lower | Upper | |
| > 3 < 5 mm | -0.6 | +0.6 | -0 | +1.2 |
| > 5 < 8 mm | -0.75 | +0.75 | -0 | +1.5 |
| > 8 < 15 mm | -0.85 | +0.85 | -0 | +1.7 |
| > 15 < 25 mm | -0.95 | +0.95 | -0 | +1.9 |
| > 25 < 40 mm | -1.1 | +1.1 | -0 | +2.2 |
| > 40 < 80 mm | -1.4 | +1.4 | -0 | +2.8 |
| > 80 < 150 mm | -1.6 | +1.6 | -0 | +3.2 |
| > 150 < 250 mm | -1.8 | +1.8 | -0 | +3.6 |
We value our customers' trust and look forward to earning it by providing high-quality cut-to-length Stainless Steel 316Ti Cold and Hot Rolled Plate and exceptional service! view Properties
What Are Stainless Steel 316ti Properties
The titanium stabilized 316ti possess superb physical and chemical properties. The general properties of this grade allow the modules to have excellent resistance against pitting in seawater systems. Apart from this, it shows excellent tolerance to high temperatures and corrosive media.
- Physical properties
The 316ti is designed with a density of 8m/cm3 at 22 degrees C. The outstanding modules of this grade exhibit a melting range between 2450 to 2630 degrees F. With an electrical resistivity of 740 nΩ.m, they exhibit a thermal conductivity of 21.5 W/m.K at 500 degrees C.
- Mechanical properties
361ti possess a tensile strength of up to 90ksi. They have yield strength of 36ksi and can be readily elongated by 54%. The modules within this grade have a hardness of 76HRB.
| Stainless Steel 316ti Sheet Weight per sheet (Kg) |
Size (mm) | Weight per sheet (Kg) |
Size (mm) |
|---|---|---|---|
| 17.9 | 2500 x1250 x 0.7 | 55.3 | 3000 x 1500 x 1.5 |
| 11.5 | 2000 x1000 x 0.7 | 38.4 | 2500 x 1250 x 1.5 |
| 14.7 | 2000 x1000 x 0.9 | 32.7 | 2000 x 1000 x 2.0 |
| 16.4 | 2000 x1000 x 1.0 | 73.7 | 3000 x 1500 x 2.0 |
| 23.0 | 2500 x1250 x 0.9 | 51.2 | 2500 x 1250 x 2.0 |
| 36.8 | 3000 x1500 x 1.0 | 63.9 | 2500 x 1250 x 2.5 |
| 25.6 | 2500 x1250 x 1.0 | 40.9 | 2000 x 1000 x 2.5 |
| 19.6 | 2000 x1000 x 1.2 | 92.1 | 3000 x 1500 x 2.5 |
| 44.2 | 3000 x1500 x 1.2 | 77.5 | 2500 x 1250 x 3.0 |
| 30.7 | 2500 x1250 x 1.2 | 49.6 | 2000 x 1000 x 3.0 |
| 24.6 | 2000 x1000 x 1.5 | 112.0 | 3000 x 1500 x 3.0 |
| Density | 316ti Stainless Steel Sheet Melting Point |
| 8.0 g/cm3 | 1399 °C (2550 °F) |
| Thickness (mm) | Width (mm) | Stainless Steel 316ti Sheet Length (mm) |
| 0.55 mm | 914 & 1219 | 1828 & 2438 |
| 0.70 mm | 914 & 1219 | 1828 & 2438 |
| 0.90 mm | 914 & 1219 | 1828 & 2438 |
| 1.20 mm | 914, 1219 & 1500 | 1828, 2438, 3000, 3048 & 3658 |
| 1.50 mm | 914, 1219 & 1500 | 1828, 2438, 3000, 3048 & 3658 |
| 1.60 mm | 914, 1219 & 1500 | 1828, 2438, 3000, 3048 & 3658 |
| 2.00 mm | 914, 1219 & 1500 | 1828, 2438, 3000, 3048 & 3658 |
| 2.50 mm | 914, 1219 & 1500 | 1828, 2438, 3000, 3048 & 3658 |
| 3.00 mm | 914, 1219 & 1500 | 1828, 2438, 3000, 3048 & 3658 |
| 4.00 mm | 1500 & 2000 | 3000 & 6000 |
| 0.55 mm | 1219 | 2438 |
| 0.70 mm | 1219 | 2438 |
| 0.90 mm | 1219 | 2438 |
| 1.20 mm | 1219 | 2438 |
| 1.50 mm | 1219 & 1500 | 2438, 3000 & 3658 |
| 1.60 mm | 1219 & 1500 | 2438, 3000 & 3658 |
| 2.00 mm | 1219 & 1500 | 2438, 3000 & 3658 |
| 2.50 mm | 1219 & 1500 | 2438, 3000 & 3658 |
| 3.00 mm | 1219 & 1500 | 2438, 3000 & 3658 |
| 4.00 mm | 1500 & 2000 | 3000 & 6000 |
| 0.70 mm | 914 & 1219 | 1828 & 2438 |
| 0.90 mm | 914 & 1219 | 1828 & 2438 |
| 1.2 mm | 1250 | 2500 |
| 1.6 mm | 1250 | 2500 |
| 2.0 mm | 1250 | 2500 |
| 3.0 mm | 1250 & 1500 | 2500, 3000 & 6000 |
| 4.0 mm | 1250 & 1500 | 2500, 3000 & 6000 |
SS 316ti Sheet International standard
- ASME SA 240 Type 316Ti
- ASTM A240 Type 316Ti
- ASTM A 480
- EN ISO 18286
- BS EN 10028-7
- BS EN 10088-2
- ASTM A 959
- ISO 15156
- EN 10051
- BS EN 10088-4
- NACE MR 0175
- ASME IID
- EN 10088-1
- ISO 15510
- EN ISO 9445
| Product Form | H | C | L | P | L | TS | TW | |
| Max Thickness (mm) | 12 | 8 | 160 | 75 | 2502) | 60 | 60 | |
| Yield Stress | Rp0.2 N/mm2 | 2203) | 2403) | 2004) | 2203) | 2005) | 1906) | 1906) |
| Rp1.0 N/mm2 | 2603) | 2703) | 2354) | 2603) | 2355) | 2256) | 2256) | |
| Tensile Stress | Rm N/mm2 | 540 - 6903) | 540 - 6903) | 500 - 7004) | 520 - 6703) | 500 - 7005) | 490 - 6906) | 490 - 6906) |
| Elongation in % min. |
longitudinal, A1) %min | - | - | 40 | - | - | 35 | 35 |
| transverse, A1) %min | 40 | 40 | - | 40 | 30 | 30 | 30 | |
| Impact (ISO-V) ≥ 10mm thick | longitudinal, J min | 90 | - | 100 | 90 | - | 100 | 100 |
| transverse, J min | 60 | - | 0 | 60 | 60 | 60 | 60 | |
| Element Alloy | Present % | |||
|---|---|---|---|---|
| TS | L | C, H, P | TW | |
| Carbon | 0.08 | 0.08 | 0.08 | 0.08 |
| Silicon | 1.00 | 1.00 | 1.00 | 1.00 |
| Manganese | 2.00 | 2.00 | 2.00 | 2.00 |
| Phosphorous | 0.040 | 0.045 | 0.045 | 0.0453) |
| Sulfur | 0.0151) | 0.0301) | 0.0151) | 0.0153) |
| Chromium | 16.50 - 18.50 | 16.50 - 18.50 | 16.50 - 18.50 | 16.50 - 18.50 |
| Nickel | 10.50 - 13.502) | 10.50 - 13.502) | 10.50 - 13.50 | 10.50 - 13.50 |
| Molybdenum | 2.00 - 2.50 | 2.00 - 2.50 | 2.00 - 2.50 | 2.00 - 2.50 |
| Titanium | 5xC to 070 | 5xC to 070 | 5xC to 070 | 5xC to 070 |
| Iron , Fe | Balance | Balance | Balance | Balance |
| STANDARD | BS | WERKSTOFF NR. | GOST | UNS | EN | JIS | AFNOR |
| SS 316Ti | 320S31 | 1.4571 | 08Ch17N13M2T | S31635 | X6CrNiMoTi17-12-2 | SUS 316Ti | Z6CNDT17‐123 |
- Chemical & Petrochemical Industries
- Railway & Transport
- Automotive
- Architecture, Building & Construction
- Oil and Gas Industries
- Energy and Power
- Plumbing And Overhead Water Tanks
- Kitchenware and Food Processing Industries
- Pharmaceutical